Take cards for holsters, optics and tactical gear without the freeze.

Mainstream checkouts list holsters and firearm accessories next to guns and ammunition, and turn lawful gear shops away or shut them later. Railbed takes your buyers’ cards and settles every sale to a wallet you control, with nothing held back.

  • No balance to freeze
  • No setup fee
  • Nothing held back

Press the card to run an example sale.

Settles to
Your own wallet, as USDC on Polygon
Chargebacks
Settled sales can’t be pulled back. Card disputes go to the provider
To start
An email, your website and a payout wallet. No setup fee, no monthly fee
Buyer ID checks
Providers decide. Smart Routing picks the one least likely to ask

How can a firearm accessories shop accept credit card payments?

A firearm accessories shop can accept credit cards with a checkout that doesn’t file gear with guns. Holsters, optics, slings, cases and range gear are lawful to sell in most places, but mainstream checkouts file them with guns and ammunition, so gear shops are refused or closed later. Railbed takes your buyers’ cards through independent, licensed card providers and settles each sale to a wallet you control, with no underwriting and no application to pass. Item rules, such as magazine limits in 15 states and DC, stay yours to follow.

Why do payment processors turn away firearm accessory shops?

Firearm accessories sit inside the weapons category on almost every mainstream checkout, even when the shop sells nothing that needs a licence. A holster, a red-dot sight or a sling is lawful to sell in most places, but the policies that decide your checkout were written for guns and ammunition, and they sweep the gear in with them.

The published rules are blunt. Shopify Payments lists “firearms, holsters, ammunition, or weapons” among the products it can’t support, so a holster maker is out on the same line as a gun shop. Square’s general terms say its services may not be used “for the sale of firearms, firearm parts, ammunition, weapons or other devices designed to cause physical harm”. PayPal’s acceptable use policy rules out transactions involving “ammunition, firearms, or certain firearm parts or accessories”, and “certain weapons or knives regulated under applicable law”. Stripe’s restricted businesses list puts legal firearms, “regulated firearm parts and accessories, such as suppressors” and other weapons such as stun guns and pepper spray in a limited-availability tier that starts with a sales conversation.

Under those policies sits a fight over how card networks label the industry. On 9 September 2022 the International Organization for Standardization created merchant category code 5723 for firearms and ammunition sellers. California, Colorado and New York now require acquiring banks to assign it, and Bank of America describes it as covering businesses that sell “firearms, firearm accessories and/or ammunition”. Texas, Kentucky and other states ban the same code. A shop that sells in several states can end up classified differently depending on where its bank and its buyers are, and an accessory shop may find itself coded with gun sellers.

What that means for a gear shop

  • A checkout that approves you at sign-up can close the account when a reviewer later reads “holster” or “magazine” in your catalogue, often with the balance still inside.
  • Specialist firearms merchant accounts exist, but they underwrite like any high-risk account: owner ID, bank statements, processing history and a reserve held back from each sale.
  • Payment pages that refuse your category usually refuse it everywhere they operate, so moving storefronts doesn’t fix it.

The pattern is the same as in every restricted category. Whoever sits between your buyer’s card and your bank account holds your money, and when their rules change, your balance stays with them.

How does Railbed fix it?

Railbed is card checkout for accessory and gear shops that never holds your money. Buyers pay with the card they already have, an independent licensed card provider charges the card, and each sale settles as USDC straight to a wallet you control, usually minutes after the buyer pays.

What goes wrong todayWith Railbed
Holsters and accessories listed alongside guns and ammunition, and refused with themNo underwriting and no application to pass
An account closed after a policy review, with the balance heldEach sale settles to your own wallet as soon as it’s paid. There’s no balance to hold
Reserves taken from every sale on specialist accountsNothing is held back from your sales
Owner ID, statements and processing history before the first saleSign up with an email, your website and a payout wallet
One bank’s category code decides how your shop is treatedBuyers pay a licensed card provider, and Smart Routing sends each to the one most likely to approve them
Chargebacks on gear that shipped weeks ago come out of your balanceSettled sales can’t be pulled back from your wallet. Card disputes go to the provider that charged the card

Smart Routing looks at each buyer’s country, currency and amount and sends them to the card provider most likely to approve the card. Every settlement is a public Polygon transaction you can check yourself.

The gun shop card code, year by year

The fight over merchant category code 5723 is why a gear shop’s payments depend on politics as much as on its catalogue. Platforms tightened their rules first, a standards body created a code for gun sellers, and the states then split over whether banks must use it or may not.

  1. Aug 2018

    Shopify amends its acceptable use policy to restrict certain firearms and parts, silencers among them.

  2. Sep 2022

    The International Organization for Standardization approves a merchant category code for firearms and ammunition sellers.

  3. 9 Mar 2023

    American Express, Mastercard and Visa say they have paused work on the code, citing state bills.

  4. 2023

    Florida, Idaho, Mississippi, Montana, North Dakota, Texas and West Virginia pass laws barring the code.

  5. 26 Sep 2023

    California’s governor signs AB 1587, which makes acquirers assign the code to firearms merchants from 1 May 2025.

  6. 1 May 2025

    Bank of America notes that only California, Colorado and New York require the code.

  7. 14 Jul 2026

    The House passes the Protecting Privacy in Purchases Act, a bill NSSF backs to end the firearms code, by 221 votes to 201.

  8. 15 Jul 2026

    The bill is referred to the Senate banking committee, where it sat on 20 November 2026.

For an accessory shop, the timeline means one thing: the label your payment company puts on you can change because of a law in a state you’ve never shipped to. A checkout that doesn’t depend on that label is a checkout that keeps working when it changes.

Where states require or ban the gun shop code

Twenty-three states have now written the firearms code into law one way or the other. NSSF, the firearm industry’s trade association, lists three states that mandate it and twenty that have passed laws barring it, in a fact sheet citing state laws from 2023 to 2025 that we read on 20 November 2026.

Code required by state law3
California, Colorado, New York. NSSF
Code barred by state law20
Alabama, Arkansas, Florida, Georgia, Idaho, Indiana, Iowa, Kentucky, Louisiana, Mississippi, Montana, New Hampshire, North Dakota, Ohio, South Dakota, Tennessee, Texas, Utah, West Virginia, Wyoming. NSSF
Everywhere else28
None of the rules above.

State law changes, and checking it is your job. The map shows the code laws only; it says nothing about which accessories each state allows.

Whether the code reaches an accessory shop depends on what sells most. Bank of America’s merchant help puts it plainly: “Merchants with multiple lines of business must use the MCC that describes the business with the highest sales volume.” So a sporting goods store whose biggest line is fishing tackle isn’t coded 5723, and one whose biggest line is “firearms, firearms accessories and/or ammunition” is. For online sales it looks first at where you’re based, and adds that if you make most of those sales “to CA, CO or NY buyers, we should further evaluate applicable laws”. A holster maker in Texas, which bars the code, selling mostly to Californians could be a hard case for its own bank.

With Railbed, your buyers pay an independent, licensed card provider, and your shop’s sales settle to your wallet whichever way that argument goes.

What gear shops sell with Railbed

Railbed fits lawful gear and accessory businesses of every size:

  • Holsters and carry gear. Kydex and leather holsters, mag carriers, belts and concealment clothing, sold from your own store with a buy button or Railbed for WooCommerce.
  • Optics and mounts. Red dots, scopes, lights, lasers and mounting hardware. Higher prices suit invoices with a deposit and a balance.
  • Slings, cases and range gear. Range bags, ear and eye protection, targets, cleaning kits and storage, with one checkout for the whole catalogue.
  • Tactical and outdoor apparel. Plate carriers where lawful, packs, boots and field clothing for hunters, shooters and preppers. Surplus dealers and unit gear makers have a page of their own: military and defense businesses.
  • Knives and multi-tools. Fixed blades, folders and sharpening gear, where your buyers’ local rules allow them.
  • Custom work. Engraving, stippling and custom holsters taken by quote, billed by invoice and paid in full or in parts.

Railbed’s checkout always asks for an email, and can also ask for the buyer’s name, date of birth with a minimum age and delivery address (details), so you can collect what your shipping and age rules need.

Marketplaces draw the same line

Moving to a marketplace rarely solves a gear shop’s problem, because the large ones split the catalogue item by item. Amazon’s weapons policy allows some accessories and prohibits others that sit on the same shelf in a range shop. As of 20 November 2026 it reads:

ItemAmazon’s rule
Holsters, including concealed carry holstersPermitted; concealed carry gear subject to geographic sales restrictions
Two point and traditional slingsPermitted
Single point and 3-point slingsProhibited
Scopes, including night vision or infrared scopesPermitted, subject to geographic sales restrictions
Laser sights labelled with laser strength and classPermitted, subject to geographic sales restrictions
Magazines, magazine extensions and couplersProhibited
Pistol stabilizing bracesProhibited
Body armor and plate carriers built for platesProhibited
Pepper spray and stun gunsPermitted, subject to geographic sales restrictions

Advertising follows a similar split. Google’s dangerous products policy says ads “for any part or component, whether finished or unfinished, that’s essential to or enhances the functionality of a gun are not allowed”, while ads “for gun parts and associated items that increase the safety of a gun are allowed”.

The result is that most gear shops sell their full range only on their own website. That makes the checkout on that website the part of the business that matters most, and the part a payment company can switch off. If you resell gear from a supplier who ships for you, our dropshipping page covers that model.

Which checkout fits a gear shop

Most accessory shops need two ways to take payment: one for the catalogue, and one for the custom or high-value order that is quoted first.

What you sellWhat to useWhat you build
A full catalogue on WordPressRailbed for WooCommerceNothing. Install it and connect your account
A full catalogue on ShopifyRailbed Checkout for Shopify, which turns each paid checkout into a Shopify orderNothing beyond the setup page
A few best sellers on a landing page or social profileA checkout page or a buy buttonOne line of HTML for the button
Custom holsters, engraving and high-value opticsAn invoice with lines, tax and a due date, paid in full or in parts if you allow itNothing. Send it from the dashboard
Club, range or team ordersOne invoice for the whole order, up to 100,000 in its currencyNothing

High-value optics sell much like watches and jewellery: a deposit, then the balance before it ships. Our luxury goods page covers that pattern in more depth.

What stays your responsibility?

Railbed takes payments. Deciding what’s legal to sell, ship or own where your buyers live is your job, and Railbed’s acceptable use policy holds only the limits the law puts on Railbed itself. Magazines over a set capacity, body armour, suppressor parts, knives, stun guns and pepper spray are each regulated differently by country and US state, and some need a licensed dealer or a buyer of a minimum age. You stay responsible for your licences, age checks, shipping restrictions and records. Items that legally have to go through a licensed dealer still do.

Three rules that catch accessory shops:

  • Magazine limits. Fifteen states and the District of Columbia generally ban the sale of large-capacity magazines: California, Colorado, Connecticut, Delaware, Hawaii, Illinois, Maryland, Massachusetts, New Jersey, New York, Oregon, Rhode Island, Vermont, Virginia and Washington, according to Giffords Law Center, whose page was updated on 10 September 2026. Block those addresses for those products in your cart.
  • Knives by mail. USPS Publication 52 says a switchblade knife is mailable only to government supply or procurement officials and to manufacturers or dealers mailing to them. Use a private carrier, and check its rules and your buyer’s state.
  • Optics going abroad. Telescopic sights, reticle sights and laser aiming devices made for firearms are listed under export classification 0A504 on the Commerce Department’s Commerce Control List. Check the Commerce Department’s licence requirements for the destination before you ship a scope out of the US.

How does a sale work?

  1. A buyer adds a holster and a mag carrier to the cart on your WooCommerce store and chooses to pay by card. The order waits as Pending payment.

  2. Railbed’s checkout opens and asks for their email and the details you require, such as date of birth and delivery address. Smart Routing picks the card provider most likely to approve their card.

  3. The buyer pays on the provider’s page in a new tab. The provider decides whether to ask for identity details. Smaller orders often need little or none, and Smart Routing tries the providers least likely to ask first.

  4. The provider buys USDC with the card payment, and it’s forwarded to your wallet on Polygon. Railbed checks that the right amount reached the right wallet before it marks the payment Paid.

  5. WooCommerce moves the order to Processing and you ship it. The buyer’s checkout tab shows the result.

Try the whole flow in Test mode first. Payments are simulated and no card is charged.

Before your first order ships

Nothing here needs an application. It is the short list a gear shop sets up once, so the first paid order arrives ready to pack.

  • A payout wallet. Save the Polygon wallet your sales should settle to. Use a wallet you hold the keys to, not an exchange deposit address.

  • A restricted-items list. Mark the products that some states limit, such as magazines, body armour, knives and pepper spray, and refuse those addresses for those products in your cart.

  • A minimum age where you need one. Require a date of birth at checkout and set a minimum age of 18 or 21 for the products that call for it. It records what the buyer says; it is not an identity check.

  • Delivery details. Ask for the delivery address at checkout, so a paid order arrives with everything your carrier needs.

  • A carrier for each product. Check which carrier takes knives, pepper spray and batteries for lights and lasers, and which needs a signature.

  • A returns rule. Decide how you handle a holster that doesn’t fit or an optic returned unopened, because Railbed can’t reverse a settled payment for you.

  • A run in Test mode. Place a test order for an ordinary product and a restricted one, and watch your cart refuse the second at a blocked address.

Fees and getting paid

Railbed shows every fee before anyone pays. Fees come out of the USDC that arrives: the card provider’s own fee and exchange spread, which the buyer sees on the provider’s page, a 1% network fee, and the Railbed fee, from 0.9%, shown in your dashboard. There’s no setup fee and no monthly fee, and the fee is locked when the buyer starts paying.

Set prices in USD, EUR, GBP, CAD, AUD, INR or SEK. Settlement is almost always USDC on Polygon, straight to your wallet. To pay suppliers from a bank account, send USDC to any exchange or off-ramp you use and withdraw it there.

Refunds are your call. Railbed can’t reverse a settled payment, so for a return you refund the buyer yourself in a way you both agree, or offer store credit. Orders of about $10 or more give buyers the widest choice of card providers, because each provider has its own minimum.

Returns, fit problems and disputes

Gear shops see a particular kind of return: the holster cut for the wrong model, the sling that’s too short, the optic that doesn’t suit the rifle. With Railbed the money from each sale is already in your wallet, so a return is something you settle with the buyer: refund the USDC, exchange the item or offer store credit, as your returns page promises.

A dispute takes a different path. The buyer’s bank raises it with the card provider that charged the card, under that provider’s terms and the card networks’ rules, and nothing comes out of your wallet. A clear returns page, a tracking number and a fit guide on every holster page still do the most to keep buyers from going to their bank at all.

When Railbed is not the right fit

Railbed suits a lawful accessory and gear shop that wants card payments without a category review. It is the wrong tool in a few cases:

  • You need cards charged automatically. Railbed has no recurring billing. A range membership or a gear club sells as a prepaid period or an invoice each time.
  • You sell items that must go through a licensed dealer. Railbed takes the payment; it doesn’t replace the dealer, background check or paperwork the law requires.
  • You want a merchant of record. With Railbed the sale is yours, and so are sales tax and VAT where you owe them.
  • You never want to hold USDC. Sales settle as USDC to your wallet. Moving it to a bank through an exchange is a step you take yourself.

Railbed compared with a firearms merchant account

Firearms or high-risk merchant accountRailbed
To applyOwner ID, bank statements, processing history and a review of your catalogueAn email, your website and a payout wallet
ApprovalDays to weeks of underwritingLive the same day
ReserveA share of each sale held back for months on many accountsNothing is held back from your sales
If you’re droppedBalance held until the provider releases itSettled sales are already in your wallet
ChargebacksA fee for each, and a ratio that can close the accountSettled sales can’t be pulled back. Card disputes go to the provider
Category codeSet by your bank, and argued over by state lawBuyers pay a licensed card provider
PayoutsOn the processor’s scheduleEach sale, to your own wallet, as soon as it settles

Gear and payment terms

The words a gear shop meets when it goes looking for a way to take cards.

Merchant category code
A four-digit code card networks use to classify a business. Your acquiring bank assigns it, and it can decide how your sales are treated.
MCC 5723
The code for firearms and ammunition sellers approved in September 2022. Three states require it and twenty bar it.
Acquiring bank
The bank that signs up a merchant to take card payments and assigns its category code.
Second Amendment Privacy Act
The name of state laws, passed in twenty states, that stop banks and card companies using a firearms-specific code.
Large-capacity magazine
A magazine over a state’s round limit, which is 10 rounds in DC. Fifteen states and DC generally ban its sale.
Geographic sales restriction
A marketplace rule that lets a product be sold only where local law allows it, such as Amazon’s for scopes and pepper spray.
Export classification
The number that places an item on the Commerce Control List. Firearm optics are 0A504, so check the licence rules for each destination.

Questions

Shopify Payments, Square or PayPal refused my holster shop. Can I use Railbed?

Yes. Railbed has no underwriting or application to pass, and a past closure doesn’t rule you out. Sign up with an email, your website and a payout wallet, then test your checkout in Test mode the same day.

Is this page for gun or ammunition sellers?

No. This page is for shops that sell accessories and gear: optics, slings, cases, holsters, hearing and eye protection and cleaning kits. Selling firearms or ammunition comes with licensing and background check rules of its own, and anything that legally has to go through a licensed dealer still has to, whoever takes the payment.

What is MCC 5723?

It is the merchant category code for firearms and ammunition sellers, approved by the International Organization for Standardization on 9 September 2022. California, Colorado and New York require acquiring banks to use it, and twenty states have passed laws barring it, NSSF reports.

Which states ban the firearms merchant category code?

NSSF lists Alabama, Arkansas, Florida, Georgia, Iowa, Idaho, Indiana, Kentucky, Louisiana, Mississippi, Montana, North Dakota, New Hampshire, Ohio, South Dakota, Tennessee, Texas, Utah, West Virginia and Wyoming. A federal bill NSSF backs to end the code, the Protecting Privacy in Purchases Act, passed the House on 14 July 2026 and was with a Senate committee on 20 November 2026.

Can I sell magazines online?

Where your buyer’s state allows it. Fifteen states and the District of Columbia generally ban the sale of large-capacity magazines, Giffords Law Center reports, and the round limit differs by state. Refuse those addresses for those products in your cart.

Can I sell firearm accessories on Amazon?

Some. Amazon permits holsters, two point slings and scopes, some subject to geographic sales restrictions, and prohibits magazines, single point and 3-point slings, pistol braces and body armor. Check its weapons policy for each product before you list it.

Can I ship rifle scopes outside the US?

Firearm optics such as telescopic sights, reticle sights and laser aiming devices are listed under export classification 0A504 on the Commerce Control List. Check the Commerce Department’s licence requirements for the destination before you ship.

Can I take a deposit on a custom holster or engraving job?

Yes. Send an invoice with lines, tax and a due date, and allow part payments so the buyer pays a deposit now and the balance before it ships. Each payment settles to your wallet as it’s made.

Do my customers need crypto or a crypto wallet?

No. Buyers pay with the card they already have. The conversion to USDC happens after they pay, and only you need a wallet.

Will buyers be asked for ID when they pay?

Sometimes, and the card provider decides. Smart Routing sends each buyer to the provider least likely to ask for ID at their amount and location, so smaller orders often go through with little or no check. Larger payments may need one.

What will customers see on their card statement?

The card provider they paid through, because that provider charges the card. Say so in your order confirmation so buyers recognise the charge.

Can Railbed freeze my money?

No. Every paid sale settles straight to a wallet you control, so there’s no balance with Railbed to hold. Railbed can stop new payments on an account only when the law requires it, and it can never touch USDC that has already reached your wallet.

What happens if a buyer disputes an order?

The dispute goes to the card provider that charged the buyer’s card, and a settled payment can’t be pulled back out of your wallet.

How do I get the money into my bank?

Send USDC from your wallet to any exchange or off-ramp you use, then withdraw to your bank account. You choose when and how much.

Sources

  1. Shopify Help Center: Shopify Payments eligibility, checked 20 November 2026
  2. Square: General terms of service, last updated 27 October 2026, checked 20 November 2026
  3. PayPal: Acceptable use policy, last updated 4 November 2026, checked 20 November 2026
  4. Stripe: Prohibited and restricted businesses, last updated 22 September 2026, checked 20 November 2026
  5. California Legislature: AB-1587, firearms merchant category code, approved 26 September 2023, checked 20 November 2026
  6. Bank of America Merchant Help: MCC 5723 Guns and Ammunition, 1 May 2025, checked 20 November 2026
  7. Kentucky Revised Statutes 237.150: prohibitions on merchant category codes, checked 20 November 2026
  8. Texas Business and Commerce Code chapter 610: unauthorized transaction categorization, checked 20 November 2026
  9. CBS News: Shopify bans sales of some guns, weapons and ammunition, 15 August 2018, checked 20 November 2026
  10. Reuters: Amex, Mastercard, Visa pause work on new firearms merchant code, 9 March 2023, checked 20 November 2026
  11. NSSF: Second Amendment Privacy Act fact sheet, checked 20 November 2026
  12. Congress.gov: H.R.1181, Protecting Privacy in Purchases Act, all actions, latest action 15 July 2026, checked 20 November 2026
  13. Amazon Seller Central: Explosives, weapons, and related items, checked 20 November 2026
  14. Google Advertising Policies Help: Dangerous products or services, checked 20 November 2026
  15. Giffords Law Center: Large-capacity magazines, updated 10 September 2026, checked 20 November 2026
  16. USPS Postal Explorer: Publication 52, 442 Mailability of knives, checked 20 November 2026
  17. Bureau of Industry and Security: EAR part 774, the Commerce Control List, checked 20 November 2026

Last updated .

PaidThree accessories, settled to your wallet$214.00

Lawful gear, sold by card.
No balance left to freeze.

Set up in under a minute. Your first payment can settle today.

  • No balance to freeze
  • No setup fee
  • Nothing held back

Moving a lot of volume? Talk to our team