Bill each stage of the job by card, without a reserve on top.

A remodel is paid in stages: a deposit when the contract is signed, draws as the work goes in, the balance at the walkthrough. Processors read that as money taken before the work is done, and some states cap the deposit itself. Railbed bills each stage on an invoice, charges the client’s card through a licensed provider and settles every payment to a wallet you control.

  • Deposits and draws
  • No setup fee
  • No cap on monthly sales

Press the card to run an example sale.

Settles to
Your own wallet, as USDC on Polygon
Chargebacks
Settled sales can’t be pulled back. Card disputes go to the provider
To start
An email, your website and a payout wallet. No setup fee, no monthly fee
Buyer ID checks
Providers decide. Smart Routing picks the one least likely to ask

How can a remodeling contractor take a deposit by credit card?

A remodeling contractor can send the deposit as an invoice through Railbed, then bill each progress payment and the final balance on invoices too. The client pays by card through a licensed card provider, and each payment settles to the contractor’s own wallet, with nothing held back. State law still sets the deposit: California caps it at $1,000 or 10 percent of the contract price, whichever is less.

Why a remodeler’s card payments get held

A remodel is paid for long before it is finished. The client signs, pays a deposit, and then waits weeks for permits, cabinets and a crew, while the contractor spends part of that deposit on materials. Draws follow as the work goes in, and the last payment comes at the walkthrough, sometimes months after the first. To a card processor’s risk team, every one of those payments is money taken for work not yet delivered, and that is exactly the pattern reserve policies are written around.

Except for a downpayment, the contractor shall neither request nor accept payment that exceeds the value of the work performed or material delivered

California Business and Professions Code
Section 7159.5

Square says so openly. Its reserves FAQ lists “Prepayment for goods or services” among the reasons it may hold back part of a seller’s sales: “If you are collecting payment in advance of delivering the purchased goods or services, we may place a reserve on your account until Square has a better understanding of your customer chargeback and refund rate.” The same page names the trade. Disputes are likelier, it says, “when a buyer may have a different expectation of the product or service than what is delivered, which is more common for home contracting and repair services”. A remodeler collecting a kitchen deposit fits both descriptions at once.

Stripe’s reserves FAQ gives similar reasons: a business that “belongs to an industry with longer-than-average delivery windows”, or an account that “shows an unexplainable sharp increase in processing volume”. Remodeling volume is lumpy by nature. A contractor who takes a few small payments in a quiet month and then three deposits in one week has done nothing unusual for the trade, and has still produced the spike a risk model looks for. A reserve on a deposit holds back the very money that was meant to buy the materials.

The card networks add their own pressure. Visa’s dispute management guide for merchants tells merchants plainly: “Do not charge for services or goods you cannot yet deliver.” It also asks them to “Clearly communicate delays, reschedules, or cancellations as soon as possible and obtain cardholder’s agreement”. A remodel with a six-week wait for cabinets runs straight into that advice, and a client who falls out with the contractor halfway through can ask their bank to reverse the deposit as work never delivered. Falling out is common enough: the Consumer Federation of America’s survey of consumer agencies for 2025 ranked professional and consumer services, “including home improvement contractors”, third among the complaints agencies handle most, after automotive and housing.

Then come the state rules on the deposit itself, which apply however you take the money. California, Maryland, Massachusetts and Pennsylvania cap it, New York wants it kept in escrow, and Texas treats construction payments as trust funds. Those are the law, not a processor’s choice, and Railbed doesn’t change any of them.

These are the published rules a remodeler’s card payments run into

  • Reserves on prepayment. Square’s reserves FAQ names payment collected “in advance of delivering the purchased goods or services”, and home contracting, among the reasons it may hold part of your sales.
  • Long delivery windows. Stripe lists an industry “with longer-than-average delivery windows” and sharp jumps in volume among its reasons for a reserve.
  • Charging before delivery. Visa’s dispute guide says “Do not charge for services or goods you cannot yet deliver”, which describes every deposit a contractor takes.
  • Dispute ratios. Visa’s monitoring programme has treated a combined fraud and dispute ratio of 1.5% as excessive since 1 April 2026, down from 2.2%, so a few disputed deposits weigh heavily on a small account.
  • Deposit caps. California, Maryland, Massachusetts and Pennsylvania limit how much a contractor may take before the work starts.
  • Money held apart. New York wants deposits in a New York bank escrow account or covered by a bond, and Texas wants a construction account for homestead jobs over $5,000.

How Railbed works for a remodeling business

Railbed is card checkout for contractors that never holds your money. You send the client an invoice for the deposit, for each draw and for the final payment. They pay with the card they already have, and each payment settles as USDC to a wallet you control, usually minutes after they pay. There’s no underwriting and no application to pass, and there’s no balance with Railbed for a risk team to hold back while the cabinets are on order.

What goes wrong todayWith Railbed
A reserve on deposits because the work isn’t done yetNothing is held back from your sales
A busy week of signed contracts reads as a volume spikeNo cap on monthly sales
Payouts that wait days after the client has paidEach payment settles to your own wallet, usually minutes after it’s paid
An application, statements and a wait before the first jobNo underwriting and no application to pass. Sign up with an email, your website and a payout wallet
Each disputed deposit costs a fee and counts toward a ratioSettled sales can’t be pulled back from your wallet. Disputes go to the card provider that charged the card

An independent, licensed card provider charges the client’s card and buys USDC with it, and the USDC is forwarded to the Polygon wallet you saved in Railbed. Railbed checks that the right amount reached the right wallet before it marks the invoice paid. Nothing else about the job changes: the contract, the permits and the schedule stay yours, and Railbed collects only what you bill.

Deposit limits in the states that set them

Several states write the deposit into law. These are the rules as each state’s own code publishes them, as of November 2026. They change, other states have rules of their own, and whether one applies to a given job depends on the contract, the property and the client, so check yours with your own adviser.

StateWhat the law says about money before the workSource
CaliforniaA down payment “shall not exceed one thousand dollars ($1,000) or 10 percent of the contract amount, whichever amount is less”. Then: “Except for a downpayment, the contractor shall neither request nor accept payment that exceeds the value of the work performed or material delivered”Bus. and Prof. Code 7159.5
MarylandNo payment before the contract is signed, and no deposit “of more than one-third of the home improvement contract price” before or when it is signedBus. Reg. 8-617
MassachusettsA deposit before work begins “shall not exceed the greater of one-third of the total contract price or the actual cost of any materials or equipment of a special order or custom made nature”Gen. Laws c.142A, s.2
PennsylvaniaOn a contract over $5,000, a deposit of at most one third of the price, or one third plus the cost of special order materials named in the written contract73 P.S. 517.9
New YorkPayments before substantial completion go into an escrow account at a bank in the state within five business days, unless a bond, a contract of indemnity or an irrevocable letter of credit covers themLien Law 71-a
TexasConstruction payments are trust funds. A contractor building improvements to a homestead for more than $5,000 must deposit them in a construction account at a financial institutionProperty Code ch. 162

Railbed doesn’t change any of these. An invoice for a deposit is still a deposit, and a payment that settles to your wallet is still money you received from the client. In California, set the deposit invoice at or under the cap and bill the rest as the work is done. In Maryland, Massachusetts and Pennsylvania, keep the deposit within a third unless your contract and the statute allow more for special order materials.

New York and Texas need more thought. USDC in your own wallet isn’t an escrow account at a New York bank, and it isn’t a construction account at a financial institution. If either rule covers a job, keep those payments where the law says, or use the bond or other route the law allows, and talk to your adviser before you send a card invoice for that money. The section on when Railbed is not the right fit comes back to this.

The law under every payment you take

The deposit caps are only part of the home improvement law a remodeler works under, and much of the rest shapes when and how you bill.

California’s contract notice. Section 7159 of the Business and Professions Code sets what a home improvement contract must say, including a notice in capital letters: “IT IS AGAINST THE LAW FOR A CONTRACTOR TO COLLECT PAYMENT FOR WORK NOT YET COMPLETED, OR FOR MATERIALS NOT YET DELIVERED. HOWEVER, A CONTRACTOR MAY REQUIRE A DOWNPAYMENT.” The section was last amended in 2025, with the changes in force from 1 January 2026.

Progress payments in writing. Section 7159.5 adds that if a contract calls for payments before the work is complete, it must include “a schedule of payments in dollars and cents specifically referencing the amount of work or services to be performed and any materials and equipment to be supplied”. A contractor who furnishes an approved performance and payment bond, or a bond equivalent or joint control approved by the registrar, is exempt from the down payment and progress payment limits.

The right to cancel. California’s contract notice gives a client three business days to cancel, or five for a senior citizen on contracts from 1 January 2021, and says the contractor “must return to you anything you paid within 10 days of receiving the notice of cancellation”. The notice isn’t required for a contract negotiated at the contractor’s place of business. At federal level, the FTC’s Cooling-Off Rule gives a buyer three days to cancel a sale made at their home, with the money back within 10 days. It leaves out sales “made because you asked the seller to visit your home to repair or perform maintenance on your personal property”, and the regulation has an exception for “a bona fide immediate personal emergency of the buyer”, where the buyer writes and signs their own statement giving up the right to cancel. Whether a remodel sold at a client’s kitchen table falls under the federal rule, a state rule or both is a question for your adviser. What matters for payments is that a cancelled contract means money back, quickly.

Licences. California’s licensing board requires a licence for any project that needs a building permit, uses employees, or totals $1,000 or more in labour and materials, a threshold raised from $500 on 1 January 2025. The board says it licenses and regulates about 285,000 contractors. Every state sets its own rules, and they matter long before a card is charged.

Liens. In California, after any payment the client can ask for “a full and unconditional release from any potential lien claimant claim or mechanics lien” for the work that payment covered, before they pay again. Paying by card doesn’t change the lien rights of your subcontractors and suppliers. Keep collecting releases as you pay them.

Trust funds. Texas Property Code chapter 162 calls construction payments trust funds, and New York’s Lien Law says deposits “shall remain the property of such owner” until they are applied to the work. Those rules govern how the money is held after it reaches you, and a card payment is no exception.

Remodeling’s money rules, year by year

  1. 1 Jan 2021

    California’s five-day right to cancel for senior citizens applies to home improvement contracts made from this date.

  2. 1 Jan 2025

    California raises the size of job that needs a contractor’s licence from $500 to $1,000.

  3. 1 Jan 2026

    The latest amendment to California’s home improvement contract rules takes effect.

  4. 1 Apr 2026

    Visa’s monitoring programme starts treating a 1.5% fraud and dispute ratio as excessive, down from 2.2%.

  5. 9 Jun 2026

    A federal judge gives preliminary approval to Visa and Mastercard’s settlement with merchants over card fees, which includes new rights to surcharge.

  6. 22 Oct 2026

    Harvard’s Joint Center for Housing Studies expects US remodeling spending to hover around $525 billion a year through the third quarter of 2027.

  7. 16 Nov 2026

    The court hears the request for final approval of the card fee settlement. As of 20 November 2026, no ruling has been published.

  8. 21 Jan 2027Ahead

    The Joint Center’s next remodeling forecast is due.

What a remodeler bills, and how each payment works

A job’s payments follow the contract, and each kind has a natural home in Railbed. All of these are invoices except the fixed-price estimate, which can also be a checkout page.

What you billHow it’s paid through RailbedWhat to watch
A paid design consultation or estimateAn invoice with one line, or a checkout page at a fixed price shared by QR codeSay in writing whether the fee is credited against the job
The depositAn invoice sent when the contract is signed, with a due dateYour state’s deposit cap, and the client’s right to cancel
Progress paymentsOne invoice per stage, sent when that stage is doneCalifornia ties each payment to work performed or material delivered
Change ordersIts own invoice for each signed change, with the change order number as the referenceGet the change signed before you bill it
The final paymentAn invoice at the walkthrough, with any retention agreed in the contractA lien release for work already paid, where the client asks
A small repair or a handyman visitOne invoice paid the same day, by link or QR code on the client’s phoneLicence thresholds, such as California’s $1,000

The businesses that bill this way are many, and Railbed is built for each of them:

  • Kitchen and bath remodelers. A deposit at signing, draws at demolition, plumbing and electrical rough-in and install, and a final payment at the walkthrough, each on its own invoice.
  • Additions, conversions and ADUs. Longer jobs with more stages, often drawn by an architect or engineer before the first invoice. A larger contract is billed in stages anyway, so no single invoice comes near the 100,000.00 limit.
  • Roofing, siding and windows. Special order materials paid for up front where the law allows it, and the balance on completion. Solar panels going onto the new roof run on longer timelines of their own.
  • Decks, fences and patios. Shorter jobs with a deposit and a balance, often paid on the client’s phone the day the crew packs up.
  • Flooring, tile and painting. Priced by the square foot, with quantities up to two decimals on each invoice line.
  • Handyman services. Small jobs paid on the day. A list of fixed-price visits can live on a checkout page.

How a sale works

  1. You and the client sign a $14,500 contract for a kitchen remodel in California. It shows a down payment of $1,000, inside the state’s cap, and a schedule of payments for the rest, each tied to a stage of the work.

  2. You create an invoice for the deposit: one line, “Kitchen remodel deposit”, $1,000.00, due in three days, with your contract terms at its foot. Railbed emails it in your business’s name with its PDF, or you show the client its QR code at the table.

  3. The client opens the invoice on their phone and chooses Pay. Smart Routing picks the card provider most likely to approve them.

  4. They pay on the provider’s page, in a new tab. The provider decides whether to ask for identity details, and Smart Routing tries the providers least likely to ask first.

  5. The provider buys USDC with the card payment and it’s forwarded to your wallet on Polygon. Railbed checks the amount and the wallet before it marks the invoice paid, emails the client a receipt, and alerts you in Telegram or Slack if you’ve connected them.

  6. You order the cabinets. When demolition and rough-in are done, you send the first progress invoice, and so on to the walkthrough.

Try the whole flow in Test mode first. Payments are simulated, no card is charged, and a Test invoice never emails your client.

Draws, change orders and the walkthrough

A remodel’s billing is a sequence, and the way you set up each invoice decides whether that sequence stays inside the contract.

One invoice per stage, or one invoice paid in parts. An invoice can let the client pay in parts: they choose how much to pay each time until the total is paid, and you can set a smallest first payment to act as the deposit. That suits a small job, a fixed-price package or a state without a rule on progress payments. It doesn’t suit California, where a contractor may neither request nor accept payment beyond the work performed or material delivered: a client paying in parts could pay ahead of the work. There, send a separate invoice for each stage when that stage is done, so every payment matches a line in the signed schedule.

Change orders. Clients change their minds. Each signed change order gets its own invoice, with the change order number in the invoice’s reference field and a line that says what changed. Keeping changes off the original invoices means the contract price and the change orders add up visibly, and a dispute over an extra has its own paper trail.

What can still change on an invoice. Until the client starts paying, you can edit anything. After that, the lines, discount, tax, currency, customer and payment options are fixed, and you can still change the due date, reminders, receipts, note, terms and owner. If a stage is cancelled, void its invoice: the client’s page says so and the reminders stop. Duplicate an invoice to start the next job’s deposit with the same lines and settings.

Reminders that do the chasing. Turn on reminders on an invoice with a due date and Railbed emails the client before and after it falls due, from your business’s name, until it is paid or voided. Each payment brings a receipt in your name showing what is left to pay.

The walkthrough and the punch list. Many contracts hold back part of the price until the punch list is done. Put that retention on the final invoice, note the punch list in its terms, and send it when the work is finished. Invoices can offer the client a tip; leave that switch off on a contract invoice.

Estimators and salespeople. Give the people who sell jobs the Sales role. They can make, send and change their own invoices and see only those. Owners and managers see By owner on the Invoices page: each person’s sent invoices, what they total, what’s been paid and what’s still unpaid.

When a client cancels, or the job stops

Every home improvement contract carries the chance that the money goes back. California’s notice says the contractor must return anything paid within 10 days of receiving a cancellation, and the FTC’s rule gives a seller 10 days to refund a sale it covers. With a processor, a refund is a button that sends money back to the card. With Railbed, the payment has already settled to your wallet, so a refund is something you send: send the USDC back or agree another arrangement with them, such as a bank transfer in dollars.

That has a practical consequence. Don’t move a deposit to your bank or spend it on materials the client hasn’t committed to while they can still cancel without cause. Keep enough USDC in the wallet to return it within the time the law gives you, and write down how you refunded and when.

A job that stops halfway is harder. If you and the client part ways after demolition, what you return depends on the contract, the work done and the materials bought. Settle it in writing. If the client asks their bank to reverse a deposit instead, the dispute goes to the card provider that charged the card; it doesn’t come out of your wallet, but it isn’t a substitute for settling fairly, and a client who feels unheard has other places to complain, from the state licensing board to a court.

Before your first job invoice

  • A payout wallet. Save the Polygon wallet your payments should settle to. Use a wallet you hold the keys to, not an exchange deposit address.

  • Your state’s deposit rule. Check the cap, escrow rule or trust fund rule that applies to your jobs, and set deposit invoices to match.

  • A payment schedule. List each payment in the contract in dollars and cents, with the work it pays for, so each invoice matches a line the client signed.

  • Terms on every invoice. Put your payment terms, cancellation rights and warranty in the invoice’s terms, which print at its foot, up to 2,000 characters.

  • Your team’s roles. Give the people who sell jobs the Sales role, so they send and see only their own invoices.

  • A refund plan. Decide how you return a deposit if a client cancels, because Railbed can’t reverse a settled payment for you.

  • A run in Test mode. Send yourself a Test invoice and pay it in Test mode before you bill a client.

Running Railbed beside the processor you have

Most remodelers already take cards somewhere: a field service app, an invoicing tool, a terminal in the showroom. Keep it. Nothing about Railbed is exclusive, and the usual first step is to add it as a second way to pay. It earns its keep in a few places:

  • For deposits and large draws. The payments most likely to draw a reserve are the ones taken furthest ahead of the work. Send those through Railbed and leave small, same-day payments where they are.
  • As the spare. When your main processor holds a payout or closes an account after a dispute, you can keep billing the jobs already under way.
  • For the declined card. A client turned away by one fraud screen is often approved by a different card provider.
  • For speed. Field service apps pay out on their processor’s schedule. Jobber’s help centre, for example, says a new account’s first payments each wait 5 business days, after which card payouts take 2 business days, and an instant payout costs an additional 1%.

Use the same job number as the invoice reference in both, so your books show which payment belongs to which job whichever way the client paid.

Refunds, cancellations and disputes

A paid invoice has settled to your wallet, so a refund is something you send, not something a processor takes from you. For a cancelled contract, an overpayment or a change order reversed, send the USDC back or agree another arrangement with the client.

A dispute works differently too. The client’s bank raises it with the card provider that charged the card, under that provider’s terms and the card networks’ rules, and nothing comes out of your wallet. At a conventional processor the same dispute counts against you: Visa’s monitoring programme adds a merchant’s fraud reports and disputes together, treats 1.5% as excessive since 1 April 2026, and charges merchants in the programme $8 for each disputed or fraudulent transaction.

None of that makes paperwork optional. Visa’s dispute guide warns that “Statements like ‘the item is as described’ are not sufficient without documentation”, and the documents that settle a contracting dispute are the ones you’d keep anyway: the signed contract and schedule, signed change orders, dated photos at each stage, inspection sign-offs and the client’s sign-off at the walkthrough. A client who can reach you and get an answer has little reason to call their bank.

What stays your responsibility

Railbed’s acceptable use policy holds only the limits the law puts on Railbed itself. Your business, your laws: running a contracting business inside the law stays your job, and Railbed doesn’t check it for you. That covers your licence and its classification, what your contracts say and the notices they must carry, the deposit cap, any escrow, bond or trust account rule, the right to cancel and the refunds it requires, permits and inspections, lien releases, sales tax on materials where your state charges it, and the insurance and bonds your state asks of contractors.

Two things deserve saying plainly. Money the law calls the client’s, or a trust fund for the work, stays subject to that law after a card payment, and Railbed doesn’t make USDC in your wallet into an escrow or construction account. And Railbed can stop new payments only when the law requires it; it never holds money that has reached your wallet.

Fees and getting paid

Railbed shows every fee before anyone pays, and all of them come out of the USDC that arrives. The client pays the price on the invoice. The card provider takes its own fee and exchange spread, shown to the client on its page. Then come a 1% network fee and the Railbed fee, from 0.9%, shown in your dashboard and locked when the client starts paying. There’s no setup fee, no monthly fee and no chargeback fee.

Set prices in USD, EUR, GBP, CAD, AUD, INR or SEK. To pay a supplier, a subcontractor or your crew from a bank account, send USDC from your wallet to any exchange or off-ramp you use and withdraw it there. Some suppliers will take USDC directly.

An invoice can total up to 100,000.00, and a remodel billed in stages rarely needs more on one invoice. A sale above that is split across invoices, which for a contractor usually means the stages already in the contract. It isn’t a way to break one payment into smaller ones to stay under a reporting line. Card providers set their own limits and decide when to check a buyer’s identity, and large payments are more likely to need a check. Each part of a part payment must also be one a card provider can take: the smallest is about $2, and $10 or more gives clients the widest choice of providers.

Refunds are your call. Railbed can’t reverse a settled payment, so for a cancellation or an overpayment, refund the client yourself in a way you both agree.

Railbed compared with how contractors take cards now

A field service app’s card paymentsCheck or bank transferRailbed
Getting startedAn application and the processor’s checksNothing to set upAn email, your website and a payout wallet
When the money is yoursOn the processor’s payout schedule, often daysWhen the check clears or the transfer landsUsually minutes after the client pays
ReservePossible on prepayments and volume spikesNoneNothing is held back from your sales
Client pays by cardYesNoYes, through a licensed card provider
DisputesA fee and a count toward the networks’ ratiosA bounced check or a stopped paymentSettled sales can’t be pulled back. Disputes go to the card provider
Money arrives asDollars in your bankDollars in your bankUSDC in your wallet, which you move to your bank

When Railbed is not the right fit

Railbed suits a contractor who bills jobs online and wants card payments without a reserve or a payout wait. It is the wrong tool in a few cases, and it is better to know them first:

  • Your client needs financing. Railbed has no consumer financing and no plan to spread a payment over months. A client who needs five years to pay for a kitchen needs a lender.
  • The law says where the deposit must sit. New York’s escrow rule and Texas’s construction account rule name where certain payments go. USDC in your wallet is neither, so keep those payments where the law says.
  • You need a card terminal in the showroom. Railbed is online checkout. A client in your showroom scans a QR code and pays on their own phone.
  • You bill maintenance plans monthly. Railbed has no recurring billing. A yearly gutter or roof check can be a single invoice once a year.
  • One payment must be larger than 100,000.00. Bill it in stages, as the contract usually does, or take that payment by bank transfer. Card providers are also more likely to ask for identity details on large payments.
  • You never want to hold USDC. Payments settle as USDC to your wallet. Moving it to a bank is a few steps through an exchange, and it is a step you take yourself.

Words worth knowing

Down payment
The money a client pays when the contract is signed, before the work starts. California caps it at $1,000 or 10% of the price, whichever is less.
Progress payment
A payment made as stages of the work are finished. California wants them listed in the contract in dollars and cents, tied to the work they pay for.
Change order
A signed change to a contract’s scope or price. Bill it as its own invoice once both of you have signed it.
Special order materials
Items made or ordered for one job alone, such as custom cabinets. Massachusetts and Pennsylvania let a deposit cover their cost beyond the usual one third.
Retention
Part of the price held back until the punch list is finished. Agree it in the contract and bill it on the final invoice.
Mechanics lien
A claim against a property by someone who worked on it or supplied materials and wasn’t paid. In California a client can ask for a release for work already paid.
Right to cancel
The client’s right to undo a contract within a few days of signing. California’s notice gives three business days, or five for a senior citizen, with payments returned within 10 days.
Trust funds
Money the law says you hold for the work rather than as your own. Texas treats construction payments this way, and New York treats deposits as the owner’s property.
Rolling reserve
A share of each sale a processor keeps back for a set time. Square says it may place a reserve when payment is collected before the work is delivered.

Questions

Can a contractor take a deposit by credit card?

Yes. Send the deposit as an invoice through Railbed. The client pays by card through a licensed card provider, and the payment settles as USDC to your wallet, usually minutes later. The deposit still has to follow your state’s rules on its size and where it is kept.

How much deposit can a contractor take in California?

California’s Business and Professions Code section 7159.5 says a down payment “shall not exceed one thousand dollars ($1,000) or 10 percent of the contract amount, whichever amount is less”, unless the contractor has an approved bond or joint control. After that, payments may not exceed the value of the work performed or material delivered. Check how it applies to your contracts with your adviser.

Can I take a card deposit for a job in New York?

New York’s Lien Law section 71-a wants payments received before substantial completion deposited within five business days in an escrow account at a bank in the state, unless a bond, a contract of indemnity or an irrevocable letter of credit covers them. USDC in your wallet isn’t such an account. Talk to your adviser before you take that money through Railbed.

Why did my processor put a reserve on my contracting account?

Processors publish their reasons. Square’s reserves FAQ lists payment collected in advance of delivering goods or services and names home contracting among the trades where disputes are more common. Stripe’s lists industries with longer-than-average delivery windows and sudden jumps in volume. Railbed holds nothing back from your sales.

Can I bill progress payments with Railbed?

Yes. Send one invoice per stage when that stage is done, each with its own due date and, if you like, reminders. In California that keeps each payment tied to the work performed or material delivered, as section 7159.5 requires.

Can a client pay an invoice in parts?

Yes, if you allow it. Turn on part payments and set a smallest first payment; the client then pays what they choose each time until the total is paid. Use it for small jobs and fixed-price packages, and use separate stage invoices where the law ties payments to the work done.

What happens if a client cancels after paying the deposit?

Return what the law and your contract require, within the time they allow. California’s notice says within 10 days of receiving the cancellation. Railbed can’t reverse a settled payment, so send the USDC back or agree another arrangement with the client, and keep the deposit in your wallet until the cancellation window has passed.

Can a client dispute a deposit with their bank?

They can. Their bank raises it with the card provider that charged the card, under that provider’s terms and the card networks’ rules. Settled sales can’t be pulled back from your wallet, and there’s no chargeback fee or ratio counted against you. Keep the contract, change orders and photos, and answer the client before they reach for their bank.

Does my client have to show ID to pay?

The card provider decides. Smart Routing sends clients to the providers most likely to approve them and least likely to ask, but some ask for light details such as a name, date of birth and address, and large payments are more likely to need a check.

Is there a limit on how much I can bill?

An invoice can total up to 100,000.00 in its currency. Bill a larger contract in stages, which is how most remodels are billed anyway. There’s no cap on monthly sales. Card providers set their own limits on single payments.

Can my estimators send invoices?

Yes. Give them the Sales role. They can make, send and change their own invoices and see only those, and owners and managers see each person’s invoices, totals and what’s unpaid under By owner.

Does Railbed offer financing?

No. Railbed takes card payments for the amount on the invoice, settled to your wallet. A client who needs to spread a large job over years needs a lender, and you can still take their deposit or a draw by card.

How do I pay suppliers and subcontractors?

Send USDC from your wallet to an exchange or off-ramp you use and withdraw it to your bank, then pay them as you do now. Some suppliers will take USDC directly. Keep collecting lien releases as you pay.

Can I keep my current card processor?

Yes. Nothing about Railbed is exclusive. Many contractors keep their field service app for small payments and send deposits and large draws, the payments most likely to draw a reserve, through Railbed.

Sources

  1. California Legislative Information: Business and Professions Code section 7159, as amended by Stats. 2025, ch. 585, in force from 1 January 2026, checked 20 November 2026
  2. California Legislative Information: Business and Professions Code section 7159.5, checked 20 November 2026
  3. Contractors State License Board: Before applying for a license, checked 20 November 2026
  4. Contractors State License Board: Handyperson exemption to increase to $1,000 in 2025, 2024, checked 20 November 2026
  5. Maryland General Assembly: Business Regulation section 8-617, checked 20 November 2026
  6. Massachusetts General Laws chapter 142A, section 2, checked 20 November 2026
  7. Pennsylvania General Assembly: Home Improvement Consumer Protection Act, section 9, 2008 Act 132, checked 20 November 2026
  8. New York State Senate: Lien Law section 71-a, checked 20 November 2026
  9. Texas Constitution and Statutes: Property Code chapter 162, checked 20 November 2026
  10. Federal Trade Commission: Buyer’s remorse, the FTC’s Cooling-Off Rule may help, September 2025, checked 20 November 2026
  11. eCFR: 16 CFR Part 429, Rule concerning cooling-off period for sales made at homes or certain other locations, up to date as of 17 November 2026, checked 20 November 2026
  12. Square: Reserves FAQ, checked 20 November 2026
  13. Stripe: Reserves, frequently asked questions, modified 2 November 2026, checked 20 November 2026
  14. Visa: Dispute Management Guide for Merchants, October 2026, checked 20 November 2026
  15. Merchant Risk Council: Stricter VAMP ratio thresholds are now in effect, 1 April 2026, checked 20 November 2026
  16. Consumer Federation of America: Consumer Agency Survey Report, June 2026, checked 20 November 2026
  17. Harvard Joint Center for Housing Studies: Remodeling spending continues to stagnate, 22 October 2026, checked 20 November 2026
  18. Reuters: US judge OKs Visa, Mastercard $38 billion swipe fee settlement, 9 June 2026, checked 20 November 2026
  19. PYMNTS: Visa, Mastercard seek approval for $38 billion swipe fee settlement, 16 November 2026, checked 20 November 2026
  20. Jobber Help Center: Jobber Payments basics, updated 6 November 2026, checked 20 November 2026
  21. Jobber Help Center: How Jobber Payments fees and payouts sync to QuickBooks Online, checked 20 November 2026

Last updated .

PaidKitchen remodel deposit, settled to your wallet$1,000.00

Deposit paid, demo day booked.
Each draw settles to your wallet.

Set up in under a minute. Your first payment can settle today.

  • Deposits and draws
  • No setup fee
  • No cap on monthly sales

Moving a lot of volume? Talk to our team