Sell tokens on your cam platform and get paid the day fans buy them.

Cam platforms pay specialist billers 10–15% of every token pack and wait for a weekly payout. Railbed takes your viewers’ cards and settles each purchase to a wallet you control, with nothing held back and no balance for anyone to freeze.

  • No application to pass
  • No setup fee
  • Settled sales stay yours

Press the card to run an example sale.

Settles to
Your own wallet, as USDC on Polygon
Chargebacks
Settled sales can’t be pulled back. Card disputes go to the provider
To start
An email, your website and a payout wallet. No setup fee, no monthly fee
Buyer ID checks
Providers decide. Smart Routing picks the one least likely to ask

How does a cam site accept credit card payments?

Most cam sites pay a specialist adult biller, because the card networks put adult content in their highest risk tier and Mastercard asks live platforms for real-time moderation and verified performers. Railbed takes viewers’ cards through independent, licensed card providers and settles each token pack to a wallet your platform controls, with no underwriting and no application to pass. It never charges a card again by itself, so viewers buy tokens or prepaid memberships each time.

Why card processors turn cam platforms away

Live cam platforms are one of the hardest businesses to bill on the card networks. They sell adult content, it streams live, and viewers buy in small, frequent amounts, so every rule about adult content, every fraud pattern of small digital purchases and every dispute about an unrecognised charge lands on the same merchant.

Mainstream processors say no in writing. Stripe’s prohibited and restricted businesses list bans “adult live-chat features” by name, alongside pay-per-view and other adult services. PayPal’s acceptable use policy requires pre-approval for mature content delivered digitally, webcam included, and approval is rare.

The card networks add rules written for live adult content. Mastercard’s 2021 standards for adult content merchants require a platform to “fully control its platform used for live streaming, including real-time monitoring and content removal”, to verify the age and identity of everyone who appears, to hold written consent, and to send its acquiring bank a monthly report of flagged content and complaints. Visa’s Integrity Risk Program puts adult content in its top tier, so the bank must register every adult merchant with Visa before it processes a single sale.

That leaves cam platforms two roads, and both are expensive

  • A specialist biller acts as the merchant of record, holds the card-network registrations and pays you out. Onboarding takes days, but the published pricing runs roughly 10% to 15% all in, payouts arrive on the biller’s schedule (typically weekly), and the biller’s content policy becomes yours.
  • A direct high-risk merchant account costs less per sale, but you carry the registrations (the $950 a year Visa fee among them), weeks of underwriting, a rolling reserve, and a bank that can close the account with your balance inside.

Then there are chargebacks. Token purchases are small and frequent, so a viewer who regrets a session, or a household member who finds the charge on a statement, can dispute a whole month of packs at once. A high-risk processor’s own guide puts it plainly: “Spouses find statements and cardholders deny purchases.” Every dispute costs a fee and counts toward Visa’s 1.5% monitoring threshold, and crossing it can end the account.

Small amounts make it worse in a way that is easy to miss. Visa’s monitoring ratio adds fraud reports to disputes, and a Merchant Risk Council briefing notes that “When the transaction amount is small, the issuing bank may credit the customer directly rather than processing a chargeback”, while the fraud report still counts against the merchant. A cam platform selling $10 and $20 packs can cross the line without ever seeing the disputes that put it there.

How Railbed fixes it

Railbed is card checkout that never holds your money. Each token pack settles as USDC straight to a wallet your platform controls, usually minutes after the viewer pays, so there is no balance for a bank or a biller to freeze and no weekly payout to wait for.

What goes wrong todayWith Railbed
Mainstream processors ban adult live chat outrightNo statements or processing history to send. Sign up with an email, your website and a payout wallet
A biller takes 10–15% and pays you weeklyThe card provider’s fee, a 1% network fee and the Railbed fee from 0.9%, and each sale settles to your wallet as it clears
A viewer disputes a month of token packs, and each dispute counts against your ratioSettled sales can’t be pulled back from your wallet. Disputes go to the card provider that charged the card
A rolling reserve holds part of every day’s sales for monthsNothing is held back from your sales
One acquiring bank decides which viewers’ cards go throughSmart Routing sends each viewer to the card provider most likely to approve them

Viewers pay with the card they already have. An independent, licensed card provider charges the card and buys USDC with it, and the USDC is forwarded to the Polygon wallet you saved in Railbed. If a viewer disputes the charge later, that dispute is between their bank and the provider, and nothing comes out of your wallet. Every settlement is a public Polygon transaction, and the dashboard links to it.

Cam platforms and the card networks, year by year

The rules a cam platform lives under were written one at a time, by Congress, the card networks and regulators, and almost every one of them landed on the platform rather than on the performer or the viewer.

  1. Jul 2006

    Congress extends the federal record-keeping law for sexually explicit images so that every website page showing such images must say where the performer records are kept.

  2. Dec 2020

    Mastercard ends card use at Pornhub, saying its investigation “confirmed violations of our standards prohibiting unlawful content”, and Visa suspends acceptance.

  3. Apr 2021

    Mastercard publishes new standards for adult content merchants, including real-time monitoring of live streams and a monthly report to the bank.

  4. 15 Oct 2021

    Acquiring banks must have every adult content merchant meet those standards “or cease the acceptance of Mastercard”.

  5. Apr 2023

    Visa’s Integrity Risk Program replaces its Global Brand Protection Program and puts adult content, MCC 5967, in Tier 1.

  6. Jun 2025

    The US Supreme Court upholds Texas’s law requiring sites with sexual material to verify visitors’ ages.

  7. Jul 2025

    Sites and apps that allow pornography must use strong age checks for UK visitors.

  8. Dec 2025

    Ofcom fines AVS Group, which runs 18 adult websites, £1 million for age checks it did not consider highly effective.

  9. Apr 2026

    Visa lowers the dispute and fraud ratio at which it counts a merchant as excessive, from 2.2% to 1.5%.

Two things follow for a cam platform. The card networks now expect you to run moderation and performer checks as a standing operation, not a promise in your terms. And the room for disputes keeps shrinking, while the laws on who may watch keep spreading, so the platform carries more of the work every year whichever way it takes cards.

What a token pack costs to sell, worked through

Here is one $50 token pack, sold three ways. The biller’s share uses the 10% to 15% range above, and the payout timing for a biller comes from CCBill’s own merchant accounting help, which says its billing week “runs from Sunday to Saturday” and tells merchants to “Add 16 days” from the first day of that week to find the date the payout is issued.

How the pack is soldWhat comes out of $50When the platform has the money
Through a specialist biller at 10%$5.00 to the biller, before chargebacks and payout feesOn the biller’s weekly payout, about 10 to 16 days after the sale
Through a specialist biller at 15%$7.50 to the biller, before chargebacks and payout feesOn the biller’s weekly payout, about 10 to 16 days after the sale
With RailbedThe card provider’s fee and spread, a 1% network fee and the Railbed fee, from 0.9%In your wallet as USDC, usually minutes after the viewer pays

The card provider’s fee varies by provider and country, and the viewer sees it on the provider’s page before paying, so Railbed never quotes a single figure for what you keep. What the table shows is the shape of the difference: a biller’s share is a fixed slice taken before you are paid, and at CCBill disputes appear as “deductions coming out of your account via chargebacks, refunds, and voids” before the payout is made. With Railbed the sale is in your wallet before any dispute can start, and a later dispute is handled by the card provider.

Which checkout fits a cam platform

Most cam platforms need two or three of Railbed’s ways to sell: one built into the site for token packs, and simpler ones for memberships, custom work and performers who sell on their own.

What you sellWhat to useWhat you build
Token packs inside your siteA checkout session for each purchase, from the REST API, with the viewer’s account in the referenceOne API call when the viewer picks a pack, and one handler for the signed payment.paid webhook
30-day or yearly fan club accessA pricing table, on its own page or embedded in yoursNothing to start. Switch access on from the dashboard, or from the webhook later
A custom video or a booked private showAn invoice for that viewer, with a tip if you allow itNothing. Send it from the dashboard by link, QR code or email
An independent performer’s own siteA checkout page or a buy buttonNothing. Paste the link in a bio or the button on the site

Whichever you choose, the viewer pays on the card provider’s page and your server hears about it from the same signed event. A platform that sells credits rather than video is closer to an adult AI app, and one built on uploaded posts and creator subscriptions is closer to a fan platform; both have their own pages.

What a cam platform can sell with Railbed

Railbed fits the way cam platforms already charge: viewers buy credit up front, then spend it inside your site.

Price packs at around $10 or more. Each card provider has a minimum, and very small amounts have fewer providers to choose from. Your platform pays performers their share from its own wallet, on whatever schedule your agreements set.

How a token purchase works

  1. A viewer taps “Buy tokens” in your site, picks a pack and enters an email address.

  2. Smart Routing sends them to the card provider most likely to approve their card, based on their country, the amount and the currency.

  3. The viewer pays on the provider’s page. The provider decides whether to ask for identity details. Small payments often need little or none, and Smart Routing tries the providers least likely to ask first.

  4. The provider buys USDC with the payment, and it’s forwarded to your wallet on Polygon. Railbed checks that the right amount reached the right wallet before it marks the payment Paid.

  5. Your server credits the tokens from the signed webhook, the viewer’s checkout tab shows the result, and you see the sale in your dashboard and, if you like, on Telegram.

Run the whole flow in Test mode first, with no card charged and no money moving.

Before your platform takes its first token sale

None of this needs an application. It is the list a cam platform gets right once, so that the first Live pack credits by itself and the duties that are yours are in place before a viewer pays.

  • A payout wallet. Save the Polygon wallet your sales should settle to. Use one your platform holds the keys to, not an exchange deposit address.

  • Pack sizes and prices. Card providers have minimums, the smallest about $2, and around $10 or more gives viewers the widest choice of providers. A $10, $25 and $50 ladder clears them all.

  • A webhook that credits once. Credit tokens when the signed payment.paid event arrives, and record the event ID so a retried delivery never adds tokens twice.

  • Performer records. US law requires producers of sexually explicit images to check each performer’s identification, record their name, date of birth and every other name they have used, and say on every page that shows such images where the records are kept. This is yours to keep, with your own counsel’s advice.

  • Visitor age checks. If your viewers include people in the UK or in a US state with an age verification law, the check is your site’s duty. Railbed’s checkout can ask for a date of birth and a minimum age, but it records what the buyer says and is not an identity check.

  • Live moderation and complaints. Decide who watches live rooms, how a stream is stopped, and how a person shown on camera can ask for content to come down.

  • Token and refund terms. Write down whether unused tokens expire and how a refund is sent, because Railbed can’t reverse a settled payment for you.

  • A run in Test mode. Buy each pack in Test mode and watch the tokens arrive before you take a Live payment.

Where US states require age checks

As of 20 November 2026, the Free Speech Coalition, the adult industry’s trade association, lists 27 states with an adult-site age verification law in effect, the most recent to take effect being West Virginia on 12 June 2026 and Iowa on 1 July 2026. Its state list is the source for the map below. The Texas law the Supreme Court upheld applies to commercial sites where more than one-third of the material is “sexual material harmful to minors”, according to the Congressional Research Service.

Age verification law in effect27
Alabama, Arizona, Arkansas, Florida, Georgia, Idaho, Indiana, Iowa, Kansas, Kentucky, Louisiana, Mississippi, Missouri, Montana, Nebraska, North Carolina, North Dakota, Ohio, Oklahoma, South Carolina, South Dakota, Tennessee, Texas, Utah, Virginia, West Virginia, Wyoming. Free Speech Coalition
Everywhere else24
None of the rules above.

State law changes often, and new bills are introduced every session. Which laws reach your platform, and how your age checks meet them, is yours to check with your own counsel. Railbed doesn’t geolocate viewers for you or decide which states you serve.

Fees and getting paid

Every fee is shown before anyone pays. Fees come out of the USDC that arrives: the card provider’s own fee and exchange spread, which the viewer sees on the provider’s page, a 1% network fee, and the Railbed fee, from 0.9%, shown in your dashboard. The fee is locked when the viewer starts paying.

Set prices in USD, EUR, GBP, CAD, AUD, INR or SEK. Settlement is almost always USDC on Polygon. To move money to a bank, send USDC from your wallet to any exchange or off-ramp you use and withdraw it there, on your own schedule. Many platforms keep part of their revenue in USDC to pay performers and suppliers directly.

Refunds are your call. Railbed can’t reverse a settled payment, so to refund a viewer you send USDC back or credit their account, as your terms say.

Refunds, chargebacks and token balances

On a cam platform most disputes are not fraud in the usual sense. They come from a viewer who spent more in one night than they meant to, or from someone else in the household who finds an unfamiliar name on a statement. How you handle both is set by your terms, not by Railbed.

None of this makes a refund policy optional. A viewer who can get a quick answer from your support has little reason to call their bank, and a card provider may decline future payments from a viewer who disputes.

Railbed compared with a cam site biller

Specialist biller or high-risk accountRailbed
ApprovalDays at a biller, weeks for a direct accountUnder a minute
To applyStatements, owner IDs, moderation procedures, performer records, card-network registrationAn email, your website and a payout wallet
PricingAbout 10–15% at a biller, or a lower rate plus registration and gateway feesThe card provider’s fee, a 1% network fee and the Railbed fee from 0.9%, all shown before payment
PayoutsWeekly at a biller, daily or later on a direct accountEach sale, to your own wallet, as soon as it settles
ChargebacksA fee for each, and the 1.5% Visa thresholdSettled sales can’t be pulled back. Disputes go to the card provider
ReserveA rolling reserve on most direct accountsNothing is held back from your sales
Card approvalsOne acquiring bank decidesSmart Routing across several card providers

Running Railbed beside the biller you have

You don’t have to leave your biller to start. Nothing about Railbed is exclusive, so most platforms add it as a second way to buy tokens and watch how their viewers use it. It earns its place in three ways from the first week:

  • As the fallback. When the biller declines a card, offer Railbed on the same screen instead of losing the sale. A viewer turned away by one bank’s fraud screen is often approved by a different card provider.
  • For the countries and amounts your biller won’t take. Send those purchases to a Railbed checkout and leave the rest where they are.
  • As the spare. A platform with two working checkouts keeps selling on the day one of them pauses the account for a review.

Give both checkouts the same reference for the viewer’s account, and let both paid events call the same code that credits tokens. Your token ledger then never needs to know which one took the money.

When Railbed is not the right fit

Railbed suits a cam platform that wants card payments without an application and is content to sell credit in blocks. It is the wrong tool in a few cases, and it is better to know them first:

  • You need cards charged automatically. Railbed has no recurring billing and stores no card, so a fan club that depends on silent monthly renewals becomes a prepaid pass the viewer buys again.
  • You want the biller to carry your compliance. A merchant-of-record biller holds the card-network registrations and runs content checks on its own terms. Railbed does none of that for you: moderation, performer records and age checks stay with your platform.
  • You want performers paid automatically. Railbed settles every sale to your platform’s wallet and doesn’t split payments, so performer payouts are yours to send.
  • You never want to hold USDC. Sales settle as USDC to your wallet. Moving it to a bank is a few steps through an exchange, and it is a step you take yourself.

Words worth knowing

The terms a cam platform meets when it goes looking for a way to take cards.

Token
Credit a viewer buys in advance and spends inside the site on tips, private shows and requests. The card is charged for the pack, not for each tip.
Specialist biller
An adult payment company that sells to viewers as the merchant of record, holds the card-network registrations and pays the platform on its own schedule.
MCC 5967
The merchant category code Visa lists for adult content, which its Integrity Risk Program puts in Tier 1 alongside gambling and pharmacies.
High-integrity risk registration
The step a bank must complete with Visa before it processes for an adult merchant, renewed with an attestation every year.
2257 records
The identification and age records US law requires producers of sexually explicit images to keep for every performer, named after the section of the federal code.
VAMP ratio
Visa’s measure of a merchant’s fraud reports and disputes as a share of its settled card sales. Since April 2026 a ratio of 1.5% counts as excessive.
Rolling reserve
A share of each day’s sales a bank or processor holds back for months against future disputes. Nothing is held back from Railbed sales.

Questions

Can a cam site use Railbed if Stripe or PayPal turned it down?

Yes. A past refusal or closure doesn’t rule you out, and there’s no processing history to send. Sign up with an email, your website and a payout wallet, and you can take your first live payment today.

Do viewers need crypto or a crypto wallet?

No. Viewers pay with the card they already have, on a normal checkout. The conversion to USDC happens after they pay, and only your platform needs a wallet.

Will viewers be asked for ID?

Sometimes, and the card provider decides. Smart Routing sends each viewer to the provider least likely to ask for ID at their amount and location, so a typical token pack often goes through with little or no check. Large or unusual payments may still need one. This is separate from the age check your own site may owe its visitors by law.

What happens when a viewer disputes a token purchase?

The dispute goes to the card provider that charged the viewer’s card. A settled payment can’t be pulled back out of your wallet, and there’s no chargeback fee from Railbed. You decide whether to remove the tokens or close the viewer’s account under your own terms.

How do performers get paid?

Every sale settles to your platform’s wallet, and you pay performers their share yourself, from that wallet or after moving money to a bank. Railbed doesn’t split payments between performers.

Can I sell recurring memberships?

Railbed doesn’t charge cards automatically. Sell access for 30 days, 90 days or a year, and remind members to buy again when it runs out. Viewers who renew on purpose don’t dispute charges they forgot about.

What will viewers see on their card statement?

The name of the card provider they paid through, because that provider charges the card. Say so on your checkout or in the welcome email, so viewers recognise the charge.

How do I get the money into my bank?

Send USDC from your wallet to any exchange or off-ramp you use, then withdraw to your bank account. You choose when and how much.

How much do cam site billers charge?

Published adult biller pricing runs roughly 10% to 15% of each sale, all in, and payouts come on the biller’s weekly schedule. With Railbed, fees come out of the USDC that arrives: the card provider’s fee and spread, a 1% network fee and the Railbed fee, from 0.9%, with no setup or monthly fee.

Does my cam site have to verify viewers’ ages?

In many places, yes, and the duty is your site’s. As of 20 November 2026, 27 US states have an adult-site age verification law in effect, and since 25 July 2025 the UK requires strong age checks on sites that allow pornography. Railbed’s checkout can record a date of birth and refuse a buyer under a minimum age, but that is what the buyer says, not an identity check.

What records does a cam platform keep on performers?

Under 18 U.S.C. 2257, producers of sexually explicit images must check each performer’s identification, record their name, date of birth and any other names they have used, keep the records available for inspection, and say on every website page showing such images where the records are kept. Mastercard’s adult content standards also ask for verified identity, age and written consent for everyone who appears.

Is it legal to run a live cam site?

In many countries, yes, for consenting adult performers and adult viewers, and under the age check, record-keeping and moderation duties above. The laws differ by country and by US state, and following them is yours. Railbed’s acceptable use policy holds only the limits the law puts on Railbed itself.

How fast does token money reach the platform?

Usually within minutes of the viewer paying. The card provider buys USDC, it is forwarded to your wallet on Polygon, and Railbed marks the payment Paid once it has checked the amount and the wallet. There is no weekly payout and no balance held with Railbed.

Can I keep my biller and add Railbed?

Yes. Nothing about Railbed is exclusive. Offer it as a second way to buy tokens, or as the fallback when the biller declines a card, and credit tokens from both checkouts’ paid events with the same code.

Sources

Paid500 tokens, settled to your wallet$49.99

Fans buy tokens by card.
You’re paid the same day.

Set up in under a minute. Your first payment can settle today.

  • No application to pass
  • No setup fee
  • Settled sales stay yours

Moving a lot of volume? Talk to our team