Bill installs and prepaid months by card, settled to your own wallet.

Processors price small internet and phone providers as high risk, with phone services on their restricted lists and telecom fraud in their models. Railbed takes your customers’ cards for installation, equipment, prepaid months and invoices, and settles each payment to a wallet you control. It has no monthly autopay, so it fits the bills a customer pays one at a time.

  • No application to pass
  • No setup fee
  • Nothing held back

Press the card to run an example sale.

Settles to
Your own wallet, as USDC on Polygon
Chargebacks
Settled sales can’t be pulled back. Card disputes go to the provider
To start
An email, your website and a payout wallet. No setup fee, no monthly fee
Buyer ID checks
Providers decide. Smart Routing picks the one least likely to ask

How can a small internet or VoIP provider take card payments?

Small ISPs and phone providers can take cards, but processors list phone services and pre-payment services as restricted, price telecom as high risk because of fraud, and count monthly disputes against them. Railbed takes your customers’ cards through independent, licensed card providers and settles each payment to a wallet you control, with no underwriting and no application to pass. It has no autopay, so it fits installation fees, equipment, prepaid months and invoices with reminders.

Why do small telecom providers pay high-risk prices for card processing?

An internet or phone provider sells something that starts working the moment it is paid for and keeps costing money every month: a line, a number, minutes, data. Processors have learned that this is exactly what fraudsters buy with stolen cards, and that monthly billing produces disputes long after the sale. A small provider gets priced for both before it has taken a single payment.

Providers that fail to do their duty when it comes to stopping these calls have no place in our networks.

Brendan Carr, FCC Chairman
Federal Communications Commission

The processors’ own rules name the trade. Braintree’s acceptable use policy lists “prepaid phone cards, phone services or cell phones”, “telecommunications equipment and telephone sales” and “pre-payment services” among the businesses it won’t serve without its approval. Helcim’s acceptable use policy prohibits “Prepaid phone cards, SIM cards, prepaid cell phones”. Stripe’s restricted businesses list prohibits telemarketing outright, which is a word a careless risk team can attach to any business with phone numbers to sell.

The card networks give the trade its own code. Mastercard’s quick reference booklet puts merchants that sell “prepaid phone services and recurring phone services” under MCC 4814, telecommunication services, and Visa’s merchant data standards manual files cellular service and prepaid calling cards under the same number. Many acquirers treat 4814 as a category to price up, because it mixes honest rural ISPs with prepaid calling card resellers and call centres.

Fraud is the reason behind the pricing. The Communications Fraud Control Association’s survey estimated that telecom fraud cost the industry $38.95 billion in 2023, 2.5% of its revenue. Much of it never touches a card, such as calls pumped to premium numbers on a hacked phone system, but processors see the same industry and price accordingly.

Regulation adds a risk processors can’t price at all. On 25 August 2025 the FCC removed over 1,200 voice providers from its Robocall Mitigation Database, “effectively disconnecting them from U.S. phone network”, for failing to keep their filings accurate. Its chairman said: “Providers that fail to do their duty when it comes to stopping these calls have no place in our networks.” A processor with VoIP merchants on its books watched some of them lose their service overnight.

None of that describes the wireless ISP in a farming county or the three-person business phone company. They pay for it anyway.

What small providers run into

  • A merchant account approved at a high-risk rate, or refused, because the application says MCC 4814 or VoIP.
  • Monthly autopay that turns expired cards into failed payments and forgotten cancellations into disputes.
  • Installation costs paid out of pocket before the customer pays, then a dispute after the dish is on the roof.
  • Payouts paused after a busy month, when a new tower or a storm season brings a wave of sign-ups.

Where card payments go wrong in a monthly service

A provider pays for the network up front and is paid back a month at a time, which makes it unusually exposed to what can go wrong with a card. The truck roll, the radio on the customer’s roof and the router are spent the day of the install. The money comes back over months or years, if the customer stays and the card keeps working.

Monthly card billing is also where disputes come from. A customer who moves, cancels by phone and keeps being charged, or forgets the service was on autopay, calls their bank rather than the provider. Each dispute arrives with a fee and counts toward the ratio Visa uses to decide whether a merchant is excessive, 1.5% of sales since April 2026. For a small provider with a few hundred customers, a handful of disputes in a slow month is enough to get a letter.

And the customers themselves are often hard to bill by card. Rural subscribers pay by cheque or cash at the office; business customers want an invoice they can pass to their accounts department; seasonal homes want three months and then nothing. A billing system built around one stored card for everyone fits none of them well.

How does Railbed fit a telecom provider?

Railbed is card checkout that never holds your money. Customers pay with the card they already have, an independent licensed card provider charges it, and each payment settles as USDC straight to a wallet you control, usually minutes after the customer pays. What that covers: Railbed takes one payment at a time, so it fits installs, equipment, prepaid periods and invoices, and it doesn’t replace monthly autopay.

What goes wrong todayWith Railbed
MCC 4814 or VoIP on an application brings a refusal or a high-risk rateNo underwriting and no application to pass. Sign up with an email, your website and a payout wallet
Installation costs are spent before the customer paysSend the install invoice before the truck rolls, paid in full or in parts with a smallest first payment
Forgotten autopay comes back as a dispute with a feeEach month or term is a payment the customer chooses, with an emailed invoice and reminders
Payouts paused after a busy month, and a reserveNo cap on monthly sales, and nothing is held back from your sales
Stolen-card disputes come out of your balanceSettled sales can’t be pulled back from your wallet; card disputes go to the provider that charged the card
One acquiring bank decides whose card goes throughSmart Routing sends each customer to the card provider most likely to approve them

Railbed checks that the right amount reached the right wallet before it marks a payment Paid, and a signed webhook tells your billing system to activate the line or extend the service.

What you can sell through Railbed

Small providers sell a few things that each fit a different part of Railbed:

  • Installation and activation. Send an invoice for the install before the appointment, or show its QR code on the technician’s phone so the customer pays on theirs. It can be paid in full or in parts.
  • Equipment. Routers, radios, dishes and phones as lines on the install invoice, or from your own store with the WooCommerce plugin or Shopify.
  • Prepaid months, quarters and years. Put a pricing table of plans on your site with a price switch between one month and twelve, each a single payment.
  • Monthly invoices for customers who want them. Create an invoice each month through the invoices API with a due date and reminders, and let the customer pay by card when it arrives.
  • VoIP credit and business phone plans. Sell call credit, numbers and seats from a checkout session in your portal, and credit the account when the signed webhook says Paid.
  • Customers who’d rather pay in crypto. Turn on crypto payments and customers can pay in USDC or USDT on six EVM networks, or in coins such as Bitcoin into a wallet you saved for that network. Card stays the default.

Which way to bill fits your network

Who you serveWhat to useWhat you build
New home customers who need an installAn invoice with lines for the install, the equipment and the first month, shared by email, link or QR codeNothing. The installer checks the invoice shows Paid before they climb
Home customers who prepayA pricing table with up to four plans and a monthly or yearly price switchA required question for the account number, so the payment finds the customer
Business customers on termsAn invoice each month or quarter, with seats, lines and tax, and reminders before and after the due dateOne call to the invoices API from your billing system, or nothing from the dashboard
VoIP accounts that top upA checkout session for each top-up, with the account ID as the referenceOne API call and one webhook handler that credits the balance
Equipment sold onlineThe WooCommerce plugin or ShopifyNothing. Install it and connect your account

Railbed’s ready-made integrations are Shopify, WooCommerce, Zapier and n8n. An ISP billing system connects through the REST API and signed webhooks: your system creates the session or the invoice, and the payment.paid event tells it to activate or extend. Shopify carts with subscriptions stay on Shopify’s own checkout.

How an installation sale works

Here is one sale from start to finish: a new customer on a wireless ISP pays $199 for the installation and their first month of service.

  1. Your office creates an invoice with three lines, the installation, the radio and router, and the first month, and sends it the day the appointment is booked. Railbed emails it in your business’s name with its PDF.

  2. The customer opens it on their phone and pays the whole amount, or the smallest first payment you allowed and the rest later. Smart Routing sends them to the card provider most likely to approve their card, and the provider decides whether to ask for any details.

  3. The provider charges the card and pays USDC, which is forwarded to your wallet on Polygon. Railbed checks that the right amount arrived and marks the invoice Paid, or Partly paid.

  4. Railbed sends a signed payment.paid webhook, and an alert to your team’s Telegram or Slack. Your system confirms the appointment, and the installer sees the invoice is paid before leaving the yard.

  5. Thirty days later, the customer gets an invoice for the second month, or buys a quarter up front from your pricing table.

Try the whole flow in Test mode first, where payments are simulated and no card is charged.

Monthly service without autopay

Railbed never stores a card or charges one on a schedule. A provider that bills monthly has three ways to use it, and most use them side by side:

  • Prepaid terms. Sell a month, three months or a year as one payment. A label such as “per month” on a pricing table describes what the customer buys; it doesn’t schedule another charge. Seasonal customers and customers with no fixed card like this best.
  • Monthly invoices with reminders. Create an invoice for each period a week before it’s due. Turn on reminders and Railbed emails the customer 3 days before the due date, on it, and 3 and 7 days after while it’s unpaid, then stops once it’s paid.
  • A balance that tops up. VoIP providers often run a prepaid balance: a checkout session for each top-up, credited by the webhook, and a low-balance email from your own system.

When an invoice goes unpaid, do what your terms say, as you would today: suspend, slow down or disconnect after the notice you promise. Phone services can have state rules on notice before disconnection, and those stay yours to check. A customer who chose to pay for a month has less reason to dispute it later, and a card that expired is a reminder email, not a failed charge and a retry fee.

Broadband labels and the price on your checkout

If you sell home or mobile internet in the United States, the FCC’s broadband label rules already shape what your checkout says. Providers must show a label for each standalone plan at every point of sale, online and in store. Large providers had to from 10 April 2024, and providers with 100,000 or fewer subscriber lines from 10 October 2024. The label lists the monthly price, any introductory rate, one-time fees at the time of purchase such as installation, data allowances and typical speeds.

The FCC simplified the rules in a Report and Order adopted on 22 July 2026 and published on 13 August 2026. It lets providers link or show an icon for the label at the point of sale instead of displaying it in full, and drops the machine-readable file and the two-year archive of retired labels. Most of the order took effect on 14 September 2026, but those three changes sit in a part the FCC delayed until it announces an effective date, and we found no such notice as of 20 November 2026. Until there is one, show the full label as before.

Two practical points for a Railbed checkout. The price on your invoice or pricing table should match the label for the same plan, including the installation fee. And the old Affordable Connectivity Program is gone: the FCC’s label page notes that April 2024 was “the last fully funded month of the ACP benefit”, so a label or checkout that still mentions it is out of date.

State rules can add more. New York’s Affordable Broadband Act, in force since January 2025, requires providers serving more than 20,000 customers to offer qualifying households service at no more than $15 a month, or $20 for faster speeds. Smaller providers are exempt; larger ones can sell those plans through Railbed like any other.

VoIP: robocall rules, traceback and card testing

Voice providers carry duties an ISP doesn’t. Every US provider must file in the FCC’s Robocall Mitigation Database, certify that it has implemented STIR/SHAKEN caller ID authentication on the IP parts of its network, and submit a robocall mitigation plan. The FCC’s August 2025 removals show what happens when a filing lapses: other carriers must stop accepting the provider’s traffic, and it may refile only with the FCC’s approval.

Those duties have a payment side. A provider that knows its customers, and keeps a record of who pays for each account, answers a traceback request faster than one that sold service to whoever had a card. Railbed helps with the record without promising identity checks: a checkout page or invoice can ask for a name, phone number, address and up to five questions of your own, such as a business registration number, and those answers arrive on the order and in the webhook. It records what the customer says; it is not an identity check.

Card testing is the other risk. Cheap call credit is a favourite place to try stolen card numbers, because a small purchase that goes through proves the card works. Settled payments can’t be pulled back from your wallet, so a stolen-card purchase no longer costs you a dispute fee, but the minutes it buys are still yours to stop. Set a sensible smallest top-up, limit how much a new account can buy in its first day, and watch for many small top-ups from one address.

Telecom rules that changed, 2024 to 2026

The ground under small providers has moved more in three years than in the decade before, and most of it touches what you charge and how you bill.

  1. Apr 2024

    The last fully funded month of the Affordable Connectivity Program, which had paid part of low-income households’ internet bills.

  2. Oct 2024

    Providers with 100,000 or fewer subscriber lines must show broadband labels at every point of sale.

  3. Jan 2025

    A federal appeals court sets aside the FCC’s net neutrality rules, holding broadband is an information service.

  4. Jan 2025

    New York’s Affordable Broadband Act takes effect for providers serving more than 20,000 customers.

  5. Jun 2025

    The Supreme Court upholds the Universal Service Fund and the contributions carriers pay into it.

  6. Aug 2025

    The FCC removes over 1,200 voice providers from the Robocall Mitigation Database.

  7. Mar 2026

    The Supreme Court rules for an internet provider in a case that began with a $1 billion copyright verdict.

  8. Jul 2026

    The FCC simplifies its broadband label rules, allowing a link at the point of sale.

Universal service, taxes and fees on your invoices

Telecom bills carry more than the price of service, and a card checkout has to carry them too. Carriers that provide interstate telecommunications contribute to the Universal Service Fund, and the Supreme Court’s opinion in FCC v. Consumers’ Research, decided on 27 June 2025, describes how a carrier “may then pass along to its customers the cost” of its contribution. The court upheld the scheme, so the line on your bills stays.

Railbed’s invoices carry up to 50 lines, a discount and one tax rate with a name such as “Sales tax”, so a fixed fee such as a universal service charge or an equipment rental can be its own line beside the service. If you bill as a common carrier, the FCC’s truth-in-billing rules ask for bills that describe each charge clearly; an invoice line is a place to do that, not a substitute for it.

Prepaid wireless, whether a carrier sells it or a top-up and eSIM shop does, can bring point-of-sale charges as well. California, for one, requires sellers of prepaid mobile service to collect and separately state 911 and 988 surcharges on each purchase, including online sales. Which charges apply to you, in which states, is a question for your tax adviser.

Equipment, deposits and installation in parts

Installation is where a small provider’s cash goes first, and part payments are where Railbed helps most. An invoice can let the customer pay In full or Part of it, with the smallest first payment you set: a $99 first payment that books the appointment, and the rest due on the install date with reminders. Each payment settles to your wallet when it’s made, and the invoice shows what’s left.

Equipment deposits work the same way. Put a refundable router deposit on the install invoice as its own line, and say in your terms when it comes back. When a customer returns the equipment, the refund is something you send: send USDC back or agree another arrangement with them, such as a credit on the next invoice.

Business customers who need a quote first can get an invoice with every line, a due date and terms, and a Sales role on your team can send invoices without seeing the rest of your account. The customer can also add a tip on an invoice if you allow it.

Before you take your first payment

There is no application to wait for, so the work is on your side of the connection. Get these right once and a paid invoice books the install or extends the service without anyone touching it.

  • A payout wallet. Save the Polygon wallet your payments should settle to. Use a wallet you hold the keys to, not an exchange deposit address.

  • Prices that match your labels. Make each plan’s price and installation fee on Railbed the same as its broadband label.

  • A way to find the account. The account number as the reference on an API session, or a required question on a pricing table.

  • A webhook that activates once. Activate or extend when the signed payment.paid event arrives, and record the event’s ID, because a failed delivery is retried.

  • A rule for unpaid periods. Decide how many days after the due date service is suspended, and write it into your terms and the invoice’s terms field.

  • Your fee lines. Decide which taxes and pass-through fees appear on invoices, and how, with your tax adviser.

  • A plan for card testing. A smallest top-up, a first-day limit for new accounts, and someone who looks at unusual orders.

  • A run in Test mode. Create, pay and renew a test account with a Test API key before you take a Live payment.

Running Railbed beside your billing system

A provider with a working merchant account and autopay shouldn’t tear them out, and Railbed doesn’t ask it to. The places providers add Railbed first:

  • For installs and equipment. Take the up-front money through Railbed invoices, paid before the truck rolls, and leave monthly service where it is.
  • For customers autopay doesn’t suit. Seasonal homes, prepaying customers and businesses that want an invoice can pay through Railbed while the rest stay on autopay.
  • As the spare. When your processor pauses payouts after a busy month, a second way to take cards keeps new customers paying.

Use the same account number as the reference in both, and let both paid events call the same activation code. Each Railbed payment shows on its own timeline, so your office can see how a customer paid.

Refunds, outages and disputes

Service fails sometimes, and customers expect a credit when it does. Decide your outage credit rule before the first storm: a day’s credit for each day down, applied to the next invoice, is simple to explain and needs no refund at all.

When a refund is due, because a customer cancels before the install or returns equipment, the payment has already settled to your wallet, so a refund is something you send. Send USDC back or agree another arrangement with them, and close or adjust the account in your own system.

A dispute is different. The customer’s bank raises it with the card provider that charged the card, under that provider’s terms and the card networks’ rules, and nothing comes out of your wallet. Keep the signed work order, the install date, the equipment serial numbers and usage records, because together they show the service was delivered. A customer who reaches a person at your office quickly has less reason to call their bank.

What stays your responsibility?

Railbed takes payments. It doesn’t file in the Robocall Mitigation Database, display your broadband labels, collect or remit telecom taxes and surcharges, answer copyright notices or decide your disconnection rules. Your FCC and state obligations stay yours, as they would with any processor, and so does the protection of customer proprietary network information under the FCC’s CPNI rules: keep call records and usage details out of invoice lines and payment references. Lifeline and other subsidy programmes are claimed through their own systems, not through a card checkout.

Fees and getting paid

Railbed shows every fee before anyone pays. Fees come out of the USDC that arrives: the card provider’s own fee and exchange spread, which the customer sees on the provider’s page, a 1% network fee, and the Railbed fee, from 0.9%, shown in your dashboard. There’s no setup fee and no monthly fee, and the customer pays the price you set.

Set prices in USD, EUR, GBP, CAD, AUD, INR or SEK. Settlement is almost always USDC on Polygon, straight to your wallet. To pay for backhaul, towers and equipment from a bank account, send USDC to any exchange or off-ramp you use and withdraw it there.

Each card provider has its own minimum, the smallest about $2, and around $10 or more gives customers the widest choice of providers. An installation invoice or a year of service is far above it; a $1 VoIP top-up is not, so set the smallest top-up at $5 or $10.

Railbed compared with a telecom merchant account

High-risk telecom merchant accountRailbed
ApprovalAn application, weighed on your MCC, your history and your customersNo underwriting and no application to pass
PricingSet by how risky the acquirer thinks MCC 4814 or VoIP isThe provider’s fee, a 1% network fee and the Railbed fee from 0.9%, shown before anyone pays
Monthly autopayYes, with stored cardsNo. Prepaid terms and invoices with reminders
ReserveAdded after a dispute spike or a busy monthNothing is held back from your sales
Stolen-card disputesPaid from your balance, with a fee and a ratioSettled sales can’t be pulled back. Card disputes go to the provider
In-store card terminalUsually includedNot offered. Customers pay online, by link or QR code
PayoutsOn the processor’s scheduleEach payment, to your own wallet, as soon as it settles

When Railbed is not the right fit

Railbed suits a provider that wants installs, equipment and prepaid service paid by card and settled for good. For some of what a telecom business does, keep your current processor:

  • Monthly autopay for most customers. Railbed never stores a card or charges one on a schedule. If your customers expect to be billed silently every month, that billing stays where it is.
  • A counter in a retail store. Railbed is online checkout, not a card terminal. A customer at your counter can pay an invoice on their own phone by QR code, but a tap on a terminal needs your current processor.
  • Paying agents, dealers or resellers from each sale. Railbed has no payouts to third parties. Commissions come out of your own wallet, under your own agreements.
  • Thousands of invoices a day through Railbed’s email. A business can send 200 invoice emails a day. A larger provider creates invoices through the API and emails each link from its own billing system.
  • Subsidy and programme billing. Lifeline claims and other government programmes are billed through their own systems, not a card checkout.
  • You never want to hold USDC. Payments settle as USDC to your wallet. Moving it to a bank is a few steps through an exchange, and it is a step you take yourself.

Words worth knowing

The terms that come up when a provider talks to a payment company, and when a payment company reads about telecom.

MCC 4814
The card networks’ merchant category code for telecommunication services, including prepaid and recurring phone services.
WISP
A wireless internet service provider, usually a small business reaching homes by radio from towers, silos and rooftops.
MVNO
A mobile virtual network operator, which sells mobile service under its own brand on another carrier’s network.
Robocall Mitigation Database
The FCC’s register of voice providers’ caller ID and robocall plans. A provider removed from it loses the right to have its calls carried.
STIR/SHAKEN
The caller ID authentication standard US voice providers must use on the IP parts of their networks.
Broadband label
The FCC’s standard summary of a plan’s price, fees, speeds and data allowance, shown wherever the plan is sold.
Universal Service Fund
The federal fund carriers contribute to for rural, low-income, school and library programmes, usually passed on as a line on the bill.
CPNI
Customer proprietary network information: what a carrier knows about a customer’s calls and service, protected by FCC rules.
Prepaid term
A month, quarter or year of service bought with one payment, with no card stored to charge again.

Questions

My processor dropped my ISP or VoIP business. Can I use Railbed?

Yes. Signing up takes an email, your website and a payout wallet, with no underwriting and no application to pass. Your customers pay by card through independent, licensed card providers, and each payment settles as USDC to your wallet. Railbed stops new payments only when the law requires it, and it never holds what has already settled.

Why are telecom and VoIP providers considered high risk?

Because processors see an industry with heavy fraud, $38.95 billion in 2023 by one industry survey, and monthly billing that produces disputes. Braintree’s policy names “phone services” and “pre-payment services”, Helcim prohibits prepaid SIM cards and phones, and the card networks group all of it under MCC 4814. Regulatory removals, such as the FCC’s in August 2025, add a risk processors can’t price.

Can Railbed charge my customers automatically every month?

No. Railbed never stores a card or charges one on a schedule. Sell prepaid terms, or send a monthly invoice with reminders the customer pays by card. Many providers keep autopay with their current processor and use Railbed for installs, equipment and customers who prefer to prepay.

Can a customer pay the installer on site?

Yes, on their own phone. Open the install invoice’s QR code on your technician’s phone and the customer scans it and pays by card. Railbed isn’t a card terminal, so there’s no device to tap.

Can customers pay an installation in parts?

Yes. An invoice can allow part payments with a smallest first payment you choose, so a customer can pay to book the appointment and pay the rest on the day. Reminders go before and after the due date until it’s paid.

Do customers need crypto or a crypto wallet to pay?

No. They pay with a normal debit or credit card on a card provider’s page, and many can use Apple Pay or Google Pay. The USDC goes to your wallet, not theirs.

Will customers be asked for ID?

Sometimes, and the card provider decides. Smart Routing sends each customer to the provider least likely to ask for ID at their amount and location. Some providers ask for light details such as a name, date of birth or address.

Does Railbed work with my ISP billing system?

Through its REST API and signed webhooks. Your billing system creates a checkout session or an invoice for each charge, with your account number as the reference, and the payment.paid event tells it to activate or extend the service. Ready-made integrations exist for Shopify, WooCommerce, Zapier and n8n.

Can I add taxes and fees to an invoice?

Yes. An invoice can have up to 50 lines, a discount and one tax rate with its own name. Pass-through fees such as a universal service charge can be their own lines. Which taxes and surcharges apply to you is a question for your tax adviser.

Does Railbed handle Lifeline or other subsidy billing?

No. Railbed takes card payments from customers. Lifeline and other programmes are claimed through their own systems.

What happens if someone buys VoIP credit with a stolen card?

The money that settled stays in your wallet: settled sales can’t be pulled back, and card disputes go to the provider that charged the card. The credit it bought is still yours to stop, so set limits on new accounts and watch for many small top-ups.

Can Railbed freeze my money?

No. Railbed never holds your money. Each payment settles to a wallet you control, and nothing is held back. Railbed can stop new payments only when the law requires it.

Can I keep my current processor and add Railbed?

Yes. Nothing about Railbed is exclusive. Use the same account number as the reference in both, and let both paid events call the same activation code.

How do I get the money into my bank?

Payments settle as USDC on Polygon to your wallet. Send it to an exchange or off-ramp you use, sell it for dollars, and withdraw to your bank. The user guide walks through it step by step.

Sources

  1. Braintree: Acceptable use policy, last updated 8 November 2017, checked 20 November 2026
  2. Helcim: Acceptable use policy, checked 20 November 2026
  3. Stripe: Prohibited and restricted businesses, last updated 22 September 2026, checked 20 November 2026
  4. Mastercard: Quick reference booklet, merchant edition, checked 20 November 2026
  5. Visa: Visa merchant data standards manual, checked 20 November 2026
  6. Communications Fraud Control Association: Telecommunications fraud increased 12% in 2023, checked 20 November 2026
  7. Federal Communications Commission: FCC bars over 1,200 providers from network access for their continued non-compliance with robocall protections, 25 August 2025, checked 20 November 2026
  8. Merchant Risk Council: Stricter VAMP ratio thresholds are now in effect, 1 April 2026, checked 20 November 2026
  9. Federal Communications Commission: Broadband consumer labels, updated 23 July 2026, checked 20 November 2026
  10. Federal Register: Empowering broadband consumers through transparency, 13 August 2026, checked 20 November 2026
  11. Governor of New York: Governor Hochul announces major digital access initiatives with launch of Affordable Broadband Act, January 2025, checked 20 November 2026
  12. US Court of Appeals for the Sixth Circuit: Ohio Telecom Association v. FCC, 2 January 2025, checked 20 November 2026
  13. Supreme Court of the United States: FCC v. Consumers’ Research, 27 June 2025, checked 20 November 2026
  14. Legal Information Institute: 17 U.S. Code § 512, limitations on liability relating to material online, checked 20 November 2026
  15. US Court of Appeals for the Fourth Circuit: BMG Rights Management v. Cox Communications, 1 February 2018, checked 20 November 2026
  16. Supreme Court of the United States: Cox Communications v. Sony Music Entertainment, 25 March 2026, checked 20 November 2026
  17. eCFR: 47 CFR 64.2401, truth-in-billing requirements for common carriers, checked 20 November 2026
  18. eCFR: 47 CFR Part 64 Subpart U, customer proprietary network information, checked 20 November 2026
  19. California Department of Tax and Fee Administration: Tax guide for sellers of prepaid mobile telephony services, checked 20 November 2026
  20. WISPA: About us, checked 20 November 2026

Last updated .

PaidInstall and first month, settled to your wallet$199.00

Keep the network running.
Keep the money it earns.

Set up in under a minute. Your first payment can settle today.

  • No application to pass
  • No setup fee
  • Nothing held back

Moving a lot of volume? Talk to our team