Get the repair paid by card before the keys leave the shop.
A customer approves a repair by phone, collects the car after hours and disputes the charge a month later. With Railbed you send the finished repair order as an invoice they pay by card on their own phone, and each payment settles to a wallet you control.
- Repair orders paid by card
- No monthly fee
- Settles to your wallet
Press the card to run an example sale.
- Settles to
- Your own wallet, as USDC on Polygon
- Chargebacks
- Settled sales can’t be pulled back. Card disputes go to the provider
- To start
- An email, your website and a payout wallet. No setup fee, no monthly fee
- Buyer ID checks
- Providers decide. Smart Routing picks the one least likely to ask
How can an auto repair shop take payment by card before a customer picks up the car?
An auto repair shop can send the finished repair order as an invoice, which the customer pays by card on their own phone before picking up the car. Railbed is online card checkout: the payment settles to the shop’s wallet, usually within minutes. An invoice carries the shop’s terms, a reference field for the repair order number, part payments with a smallest first payment, and a receipt. Estimates, authorisations, warranties and refunds stay with the shop under its state’s repair law.
Why do repair payments go wrong by card?
A repair is a sale made in two halves. The customer agrees to the work at one moment, usually by phone and often from a desk across town, and pays for it at another, when the car is ready. Most of what goes wrong with card payments in a repair shop happens in the gap between those two moments.
- $612The average repair order at a typical independent shop, November 2025 to October 2026
- $120 an hourThe median labour rate billed by US independent shops over the same year
- 10th yearAuto sales, leases and repairs top the complaints US consumer agencies receive
No work shall be done and no charges shall accrue before authorization to proceed is obtained from the customer.
The amounts are large enough to matter. ARI, a maker of shop software, looked at 568,266 repair orders from 1,780 independent shops between November 2025 and October 2026 and found that “the typical repair order was about $360, while a few large jobs pull each shop’s average up to around $612”. Its separate count of labour rates found a median of $120 an hour, with 41% of shops raising their rate in the past year, “usually by about $20 an hour”. A brake job, a timing belt or a transmission is a four-figure card payment for many households, and it arrives unplanned.
The approval and the payment rarely happen at the same counter. The customer drops the car off before work, the shop diagnoses it and calls with the estimate, and the customer says yes on the phone. State law shapes that call. California’s repair law says “no work shall be done and no charges shall accrue before authorization to proceed is obtained from the customer”, and New York’s Repair Shop Act tells drivers that “a shop may not perform any services unless you give your permission”. When the car is ready, the customer has to come back during opening hours to pay at the terminal, or read a card number over the phone, or ask whether they can pay later.
The dispute, when it comes, comes after the car has gone. The Consumer Federation of America reported in June 2026 that “for the tenth year in a row, auto-related issues, including deceptive advertising, lemon vehicles, incomplete repair work, and mechanical failures involving new and used vehicle sales, leases, and repairs, ranked as the nation’s top consumer complaint category”. A customer who thinks the noise is still there, or that the bill grew beyond what they approved, can go to their card issuer instead of back to the shop. Visa’s dispute guide lists “services were poorly performed or did not match the agreed scope” among the situations that lead to its not-as-described dispute. A shop with a conventional account sees the money pulled back out, plus a fee, months after the parts were bought and the technician paid.
And the cost of card acceptance comes out of a labour rate set by the local market, not by the shop’s processor. A shop that wants to recover the fee meets the card networks’ surcharge rules and the states that forbid surcharges altogether.
What shops do today
- Hold the keys until the bill is paid at the counter. Safe for the shop, but a customer who works the same hours as the shop has to take time off to pay.
- Take the card number by phone. Quick, but the customer never sees the bill they are paying, and nothing is signed.
- Leave the car outside with the key in a drop box. Convenient for the customer, and the shop hopes the payment arrives afterwards.
- Add a card fee. Recovers some of the cost, where the state allows it, and annoys the customer at the moment they are already paying more than they hoped.
How Railbed works for a repair shop
Railbed is online card checkout that never holds your money. You send the customer an invoice for the repair order, they open it on their phone and pay by card, an independent licensed card provider charges the card, and the payment settles as USDC straight to a wallet you control, usually minutes after they pay.
| What goes wrong today | With Railbed |
|---|---|
| The car is ready at 4 p.m. and the customer can’t get to the counter before you close | They pay the invoice from their phone, and the shop sees it Paid before anyone hands over a key |
| A card number is read over the phone, with nothing signed | The customer enters their own card on the provider’s page, and the invoice shows the work, your terms and the repair order number |
| A dispute months later pulls the payment back out of your account | Settled sales can’t be pulled back from your wallet. Card disputes go to the provider that charged the card |
| A big engine job brings a reserve or a review of your account | No underwriting, no cap on monthly sales, and nothing is held back from your sales |
| Recovering card costs means a surcharge, which some states ban | The customer pays the price you set, and fees come out of what arrives |
| Nobody on the floor knows the after-hours payment came in | Alerts go to Telegram or Slack the moment a payment is Paid |
The card provider charges the card, and any card dispute goes to it. Railbed checks that the right amount reached the right wallet before it marks a payment Paid, and each settlement is a public Polygon transaction you can check yourself. Signing up takes an email, your website and a payout wallet. There is no application to pass.
How a repair payment works
A customer drops their car off at 7:30 a.m. with a grinding noise from the front wheels. Your technician finds worn pads and scored rotors, and your service advisor calls with an estimate of $428.00 for front brake pads and rotors. The customer approves it, and the advisor notes the date, time and name on the work order.
When the job is done, the advisor sends an invoice for $428.00, with the parts and labour as separate lines, the repair order number in the reference field and the shop’s 12-month repair warranty in the terms.
The customer opens it on their phone at lunch, enters an email and pays by card. Smart Routing picks the card provider most likely to approve their card, and the provider decides on its own page whether to ask for any identity details.
The provider buys USDC with the payment and it is forwarded to your wallet on Polygon. Railbed checks that the right amount arrived before it marks the invoice Paid, sends the customer a receipt, and your Telegram or Slack alert tells the front desk.
The customer collects the car after work, or picks the keys up from your drop box, with nothing left to settle at the counter.
Try the whole flow in Test mode first. Payments are simulated and no card is charged.
Estimates and authorisation come before the invoice
The invoice is the end of a paper trail the law already asks you to keep, and it works best when it matches every page before it. The rules differ by state; these are three of the most detailed, as their published texts read on 20 November 2026.
California. Section 9884.9 of the Business and Professions Code says the shop “shall give to the customer a written estimated price for labor and parts necessary for a specific job”. It goes on: “No work shall be done and no charges shall accrue before authorization to proceed is obtained from the customer.” Charges above the estimate need the customer’s consent “obtained at some time after it is determined that the estimated or posted price is insufficient and before the work not estimated or posted is done”. Consent can come by email, and when it comes by phone the shop notes “the date, time, name of person authorizing the additional repairs, and telephone number called” on the work order. Body and collision shops owe an itemised estimate that says whether each crash part is original equipment or aftermarket.
Florida. Section 559.905 of the Florida Statutes requires a written estimate when “the cost of which repair work will exceed $150 to the customer”, a threshold raised from $100 in 2024. Among the items the estimate must include is “the customer’s intended method of payment”, along with the daily storage charge once the customer has been told the work is done. A customer who leaves the car “during hours when the shop is not open” gives an implied partial waiver of the written estimate, but the shop must still contact them once the diagnosis is done.
New York. The DMV’s consumer bill of rights under the Repair Shop Act says the written estimate is given “if you request it”, that “the shop may not charge more than the estimated price without your permission”, and that “if work is authorized verbally or by telephone, the invoice must show the date, time, and name of the person giving authorization”.
Railbed doesn’t replace any of this. It takes the payment once the work is approved and done. What it adds is a record that lines up with the estimate: the invoice lists the same parts and labour, carries the repair order number, and shows the customer the total before they pay. If the final bill is higher than the estimate because the customer approved more work, put the approval in the invoice’s terms or a line note, so the customer sees it again on the page they pay from. The FTC’s Auto Repair Basics guide tells drivers the estimate “should state that the shop will contact you for approval before they do any work exceeding a specified amount of time or money”, and to “get a completed repair order describing the work done”. A customer who can lay the invoice beside the estimate and see the same numbers has less reason to call their bank.
The car, the keys and the lien
A repair shop has something most sellers don’t: the customer’s car. The law in many states recognises that. California’s Civil Code section 3068 gives “a lien dependent upon possession for the compensation to which the person is legally entitled for making repairs”, which arises when “a written statement of charges for completed work or services is presented to the registered owner or 15 days after the work or services are completed, whichever occurs first”. The same section says the lien is extinguished unless the shop applies to conduct a lien sale, or goes to court, within 30 days after it arises.
New York tells drivers they may inspect the car before paying, adding that “this does not give you the right to remove the vehicle from the shop without paying for the repairs”.
Florida goes further, and its rule speaks to card payments directly. Under section 559.917, a customer who disputes a repair can get the car back by filing “a cash or surety bond” for the invoiced amount with the clerk of the court, and the shop then has 60 days to sue to recover the bond. The statute adds that a customer “who stops payment on a credit card charge or a check drawn in favor of a motor vehicle repair shop on account of an invoice or who fails to post a cash or surety bond pursuant to this section shall be prohibited from any recourse under this section”. Florida’s law, in other words, sets out the bond as the route for a disputed repair bill. A card dispute still goes to the card issuer, whatever the statute says, but it isn’t the route the law lays out.
What this means for payments is simple. A lien is a tool for an unpaid bill, and an unpaid bill is the outcome every shop wants to avoid. Getting paid before the car leaves, without making the customer come to the counter, keeps the lien in the drawer. With Railbed the customer pays the invoice from wherever they are, and you release the car once it shows Paid. Whether and how to use a lien, and what your state requires first, are questions for your own adviser.
Where repair disputes come from
Repair disputes rarely claim the work wasn’t done. They claim it was done badly, cost more than agreed, or didn’t fix the problem. Visa’s dispute guide, dated October 2026, describes its not-as-described dispute as applying when the cardholder claims the services they received “were materially different from what was described, defective, damaged, or did not perform as reasonably expected based on what was presented at the time of purchase”. Among the cases it lists:
- “Services were poorly performed or did not match the agreed scope”
- “The cardholder contacted you about a quality issue but assessed the resolution offered was inadequate or unclear”
For a shop, the first is a comeback that became a dispute, and the second is a comeback the customer felt was handled badly. The guide’s misrepresentation dispute covers cases where “key terms, conditions, or limitations were not clearly disclosed before checkout”, which is a repair bill that grew without a recorded approval.
The documents Visa suggests for a response are the ones a well-run shop already keeps: “service terms that define scope, limitations, or performance standards” and “records showing a repair, replacement, or refund was offered in line with your disclosed policy”. The signed estimate, the noted phone approval, photos of the worn parts, the old parts themselves if the customer asked for them, and the invoice that matches all of it.
On Railbed, a settled payment can’t be pulled back from your wallet, and there is no chargeback fee or chargeback ratio for you to manage. A customer who disputes the charge does so with their card issuer, and the dispute goes to the provider that charged the card. That protects you from a dispute that is wrong. It doesn’t protect you from a customer who is right. If the repair failed, your warranty, your state’s repair law and your reputation all still apply, and the fix or the refund is yours to give.
Warranties, service contracts and insurance
Three other parties often have a say in a repair bill, and Railbed doesn’t stand in for any of them.
Manufacturer warranties. The FTC tells drivers in its guide to auto warranties that “it’s illegal for a dealer to deny your warranty coverage because you had routine maintenance or repairs done by someone else”, and that “your warranty stays in effect if you use aftermarket or recycled parts”. An independent shop can say so to a customer who worries about leaving the dealer. Work the manufacturer pays for under its warranty still goes to the dealer it chooses.
Service contracts. A customer with a vehicle service contract, often sold as an extended warranty, may have a claim the contract company pays to the shop directly, minus a deductible. Invoice the customer for the deductible and any work the contract doesn’t cover, and settle the rest with the contract company as you do today. The FTC’s Auto Repair Basics guide tells drivers to check “whether repair costs are paid directly by the company to the repair shop or whether you will have to pay first and get reimbursed”.
Insurance. In a collision repair, the insurer usually pays its share to the shop or the owner, and the owner pays the deductible. Railbed doesn’t bill insurers or submit claims. It takes the customer’s part: the deductible, the upgrades they chose, or the whole bill when they decide not to claim.
Right to repair and the work coming to independent shops
The fight over who may read a car’s data decides how much work reaches an independent shop, and it has moved quickly.
In 2014 automakers and independent repair groups signed a national memorandum of understanding, based on Massachusetts’s right to repair law, under which participating automakers agreed to give independent shops the same diagnostic and repair information they give franchised dealers. In 2020 Massachusetts voters approved a ballot question extending that law to wireless vehicle data, and on 12 February 2025 a federal judge dismissed the automakers’ long-running challenge to it, according to Ballotpedia. A law firm’s review of the case reported that the automakers’ trade group appealed to the First Circuit in July 2025. Maine’s voter-approved automotive right to repair law took effect on 5 January 2024, its legislature’s working group reported.
In Congress, the REPAIR Act (H.R. 1566) was introduced in February 2025 to give owners and their chosen repairers access to vehicle-generated data. In May 2026 the House Energy and Commerce Committee approved a narrower version inside the Motor Vehicle Modernization Act of 2026 (H.R. 7389). SEMA reported that the committee’s text would codify the 2014 memorandum for vehicles under 14,000 pounds and make it enforceable by the FTC, while dropping broader provisions on telematics and wireless data access. As of November 2026 it had not become law.
None of this changes how a customer pays. It changes how many of them come to you, and more independent work means more invoices a customer pays away from the counter.
Which code a repair shop’s payments carry
A general repair bay, a body shop and a tyre store look alike from the street, but each card payment they take carries a different merchant category code. Visa’s Merchant Data Standards Manual gives repair businesses several:
| Code | Visa’s description | Who it covers |
|---|---|---|
| 7538 | Automotive Service Shops (Non-Dealer) | General repair, muffler, glass, alignment and quick lube shops |
| 7531 | Automotive Body Repair Shops | Body and collision shops |
| 7535 | Automotive Paint Shops | Shops that “paint, refinish, and restore automobiles” |
| 7534 | Tire Retreading and Repair Shops | Shops that “sell, install, repair, or retreat old tires” |
| 5532 | Automotive Tire Stores | Tyre stores that may also install and repair |
Visa describes 7538 merchants as those that “conduct automotive repairs and general or specific services”. Dealership service departments fall under the dealers’ own codes, which cover “Sales, Service, Repairs, Parts, and Leasing”. The code matters on a conventional account because a processor prices and watches by it. On Railbed the card provider charges the card, and none of these codes decides whether you may sign up.
Repair law and right to repair, year by year
- 1971
California adds its Automotive Repair Act to the Business and Professions Code.
- 1980
Florida passes its Motor Vehicle Repair Act, with written estimates and a bond to release a car from a repair lien.
- 2014
Automakers and independent repair groups sign a national memorandum on access to repair information.
- Jul 2022
The FTC announces settlements with companies that told customers third-party parts or repair would void their warranties.
- Jan 2024
Maine’s automotive right to repair law takes effect.
- 2024
Florida raises its written estimate threshold from $100 to $150.
- Feb 2025
A federal judge dismisses automakers’ challenge to the Massachusetts data access law.
- May 2026
A House committee approves a narrowed REPAIR Act inside H.R. 7389.
Before your first repair invoice
A wallet you hold the keys to. Every payment settles there, so use a wallet of your own and not an exchange deposit address. The wallet guide covers the choice.
Your estimate and authorisation routine. Keep doing what your state requires before the work starts, and record phone approvals the way your state’s rules describe.
Your repair warranty in writing. Paste your warranty terms into the invoice’s terms, up to 2,000 characters, so the customer sees them on the page they pay from and on their receipt.
The repair order number on every invoice. Put it in the reference field, so a payment ties to one job and one vehicle in your shop software.
A rule for releasing cars. Decide that keys go back once the invoice shows Paid, and tell your front desk and your drop box customers.
A refund plan. Decide how you will send money back after a comeback you can’t fix, and who approves it.
The Sales role for your advisors. Give service advisors the Sales role so they send and follow their own invoices only, and connect Telegram or Slack so the desk sees each payment.
One test sale. Run an invoice through Test mode, then a small real one, and check the settlement in your wallet before you rely on it.
Refunds, comebacks and disputes
Refunds are yours to send. Railbed can’t reverse a settled payment, so when a repair has to be refunded in whole or in part, you send USDC back or agree another arrangement with the customer. Many shops settle a comeback by redoing the work at no charge, which needs no payment at all; record what you did on the original repair order.
If a customer approved a deposit for a part and then cancels before it arrives, your written terms decide what you keep, within your state’s law. Put those terms on the invoice before they pay. You can void an invoice that is no longer due; any part already paid stays in your wallet until you return it, and the customer’s page says the invoice was voided. A payment already under way still completes.
A customer who disputes a card payment does so with their card issuer, and the dispute goes to the provider that charged the card. A settled payment can’t be pulled back from your wallet. It doesn’t change your duty to honour your repair warranty or to refund what your state’s law says you owe.
What stays your responsibility
The payment is the part Railbed handles. The rest of the job stays with the shop, whichever way the customer pays:
- Your licence and your state’s repair law. Registration, estimates, authorisations, invoices, returned parts and storage charges are yours to follow. Your business, your laws: Railbed doesn’t check them for you.
- Your repair warranty and comebacks. Railbed doesn’t judge whether a repair worked or what a customer is owed.
- Liens and storage. Whether you hold a car, charge storage or start a lien sale is between you, the customer and your state’s rules.
- Insurers and service contract companies. Railbed doesn’t bill insurers, submit claims or collect from contract administrators.
- Sales tax, hazardous waste fees and core charges. Collect and report what your state requires, and show it on the invoice.
- Your customers’ data. If a customer asks you to delete their details, “Delete customer data” removes that customer’s personal details. Check first which records your state requires you to keep, often for years.
Fees and getting paid
Railbed shows every fee before anyone pays. Fees come out of the USDC that arrives: the card provider’s own fee and exchange spread, which the customer sees on the provider’s page, a 1% network fee, and the Railbed fee, from 0.9%, shown in your dashboard. There’s no setup fee and no monthly fee, and the customer pays the price you set, with no surcharge.
Card providers have per-payment minimums from about $2, and $10 or more gives the widest choice of providers, which covers almost every repair. An invoice takes up to 100,000.00. Large payments are more likely to need an identity check by the provider.
Surcharges depend on the state. Visa’s surcharging Q&A says a surcharge must “limit the amount to your merchant discount rate (MDR) for the applicable credit card or 3% whichever is lowest”, and it lists the states that prohibit or restrict surcharging as of 15 February 2024. On Railbed the customer pays the price on the invoice, and the fees come out of what arrives, so there is no surcharge to add or explain.
Settlement is almost always USDC on Polygon, straight to your wallet, usually minutes after the customer pays. To pay your parts suppliers, your rent or your technicians, send USDC to any exchange or off-ramp you use and withdraw it to your bank, as the guide to moving money to your bank describes. You choose when and how much.
Railbed compared with a counter terminal and phone payments
| Counter terminal and card by phone | Railbed | |
|---|---|---|
| Customer not at the shop | Card number read over the phone, nothing signed | An invoice they pay by card on their own phone |
| After-hours pickup | Pay before closing, or leave the car and hope | Pay the invoice any time, release the car once it shows Paid |
| Record of the job | The repair order in your system, the card slip at the counter | The invoice lists the work, your terms and the repair order number |
| Card cost | A surcharge where the state allows it, or absorbed | No surcharge. Fees come out of what arrives |
| Disputes | The payment can be pulled from your account, plus a fee | Settled sales can’t be pulled back. Card disputes go to the provider |
| To start | A merchant application and underwriting | An email, your website and a payout wallet |
When Railbed is not the right fit
Railbed suits a shop that wants customers to pay repair invoices by card online, from wherever they are. It is the wrong tool in these cases:
- You need a card reader at the counter. Railbed has none. A customer at the desk pays on their own phone by QR code, or at your existing terminal.
- You need to bill an insurer or a warranty company. Railbed takes payments from customers. It doesn’t submit claims or collect from third-party payers.
- You need automatic payments. Railbed stores no card and charges nothing automatically, so maintenance plans billed monthly and recurring fleet charges stay with your current tools.
- You offer repair financing. Railbed doesn’t lend or arrange credit; a customer who needs to spread a big job over months uses your financing partner.
- You want dollars in your bank automatically. Sales settle as USDC to your wallet, and moving them to a bank is your step.
- Your customers can’t use a phone. Every payment happens on the customer’s own phone or computer.
Repair shop payment words
- Repair order
- The shop’s record of a job: the vehicle, the complaint, the authorised work, the parts and labour, and the total.
- Written estimate
- The price a shop gives before starting work. Several states require one above a set amount or when the customer asks.
- Authorisation
- The customer’s approval to start work or to go beyond the estimate. Some states say how a phone approval must be recorded.
- Comeback
- A car returned because the repair didn’t fix the problem or the problem returned. Usually covered by the shop’s own warranty.
- Possessory lien
- A shop’s right, under state law, to keep a car until the repair bill is paid, with limits and deadlines that vary by state.
- Core charge
- A deposit on a part such as a starter or battery, refunded when the old part is returned for rebuilding.
- Deductible
- The share of a covered repair the owner pays when an insurer or service contract company pays the rest.
- Merchant category code
- The four-digit code a card payment carries to say what kind of business took it, such as 7538 for repair shops.
- Smallest first payment
- The invoice setting that makes the first part payment at least the amount you choose, such as the cost of a special-order part.
- Smart Routing
- Railbed’s choice of card provider for each customer, ranked by the chance that provider approves their card.
Questions
Can an auto repair shop take card payments online?
Yes. Send the customer an invoice for the repair order, and they pay by card on their own phone or computer. The payment settles as USDC to a wallet you control, usually minutes later, and nothing is held back from it.
Can a customer pay for a repair before they pick up the car?
That is what Railbed is best at. Send the invoice when the job is done, the customer pays from work or home, and your Telegram or Slack alert tells the desk it is Paid before anyone hands over a key or opens the drop box.
Does Railbed replace my written estimate or authorisation?
No. Your state’s rules on estimates and approvals apply before the work starts, exactly as they do today. The invoice comes at the end, and it works best when it lists the same parts and labour as the estimate and any extra work the customer approved.
Can I take a deposit for a special-order part?
Yes. Turn on part payments and set a smallest first payment equal to the part’s cost. The customer pays that first, and the rest when the job is done, on the same invoice. Put what happens to the deposit if they cancel in the invoice’s terms.
Can a customer pay a big engine or transmission job in parts?
Yes. An invoice can be paid in parts, each part settling to your wallet as it is paid, and you can set the smallest first payment you accept. An invoice takes up to 100,000.00.
What happens if a customer disputes a repair with their bank?
The dispute goes to the card provider that charged the card, and a settled payment can’t be pulled back from your wallet. There is no chargeback fee. Your repair warranty and your state’s law still decide what you owe the customer, and refunds are yours to send.
Can fleet customers pay on terms?
Yes. Give each fleet invoice a due date, your payment terms, their purchase order number in the reference field and, if you want, reminders before and after the due date. Railbed doesn’t charge anyone automatically, so each invoice is paid when the customer pays it.
Can a mobile mechanic take payment at the roadside?
Yes. Send the invoice by text, or show its QR code on your phone, and the customer pays on theirs. Railbed is online checkout, so there is no card reader to carry.
Can I collect an insurance or service contract deductible?
Yes. Invoice the customer for their deductible and any work the insurer or contract company doesn’t cover. Railbed doesn’t bill insurers or contract administrators, so their share reaches you the way it does today.
Can my service advisors send invoices?
Yes. Give them the Sales role on the Team page. They make, send and follow their own invoices only, and every invoice records who created it.
Can I add a card fee?
You don’t need one. The customer pays the price on the invoice, and Railbed’s fees come out of what arrives, so there is no surcharge to add or to check against your state’s rules.
Do my customers need to know anything about crypto?
No. They pay with the card they already use, and the card provider does the conversion. The USDC arrives in your wallet, not theirs. Fleet customers who already hold dollar stablecoins can pay that way if you turn on crypto payments.
Will customers be asked for ID?
Card providers decide whether to check a buyer’s identity, and large payments are more likely to need a check. Smart Routing sends each customer to the providers least likely to ask, and light checks ask for a name, a date of birth and an address. No one can promise a customer will never be asked.
Can Railbed freeze money I’ve been paid?
No. Payments settle to your own wallet, and Railbed never holds your money. Railbed can stop new payments only when the law requires it, and its acceptable use policy holds only the limits the law puts on Railbed itself.
How do I get the money into my bank?
Send USDC from your wallet to an exchange or off-ramp you use and withdraw it to your bank account. The guide to moving money to your bank walks through it.
Sources
- ARI: 2026 repair shop benchmarks, average repair order, car count and revenue, 29 October 2026, checked 20 November 2026
- ARI: Auto repair labor rates by state (2026), 28 October 2026, checked 20 November 2026
- Consumer Federation of America: CFA’s consumer agency report reveals America’s top 10 consumer complaints, 18 June 2026, checked 20 November 2026
- California Legislature: Business and Professions Code section 9884.9, as amended effective 1 January 2019, checked 20 November 2026
- New York DMV: Know your rights in auto repair, checked 20 November 2026
- Florida Legislature: Florida Statutes section 559.905, written motor vehicle repair estimate, 2026 Florida Statutes, checked 20 November 2026
- Florida Senate: Florida Statutes section 559.905, 2023 text, checked 20 November 2026
- Florida Legislature: Florida Statutes section 559.917, bond to release possessory lien, 2026 Florida Statutes, checked 20 November 2026
- California Legislature: Civil Code section 3068, as amended effective 1 January 2008, checked 20 November 2026
- FTC: Auto repair basics, August 2012, checked 20 November 2026
- Visa: Visa Dispute Management Guide for Merchants, October 2026, checked 20 November 2026
- FTC: Auto warranties and auto service contracts, April 2024, checked 20 November 2026
- FTC: FTC says companies’ warranty restrictions were illegal, July 2022, checked 20 November 2026
- Ballotpedia: Massachusetts Question 1, Right to Repair Law vehicle data access requirement initiative (2020), checked 20 November 2026
- Nelson Mullins: 2026 shaping up to be big year for access to vehicle-generated telematics data, checked 20 November 2026
- Maine Legislature: Automotive Right to Repair Working Group report, checked 20 November 2026
- Congress.gov: H.R. 1566, REPAIR Act, 119th Congress, introduced 25 February 2025, checked 20 November 2026
- SEMA: US House committee advances legislation to enact right-to-repair provisions, 26 May 2026, checked 20 November 2026
- Visa: Visa Merchant Data Standards Manual, checked 20 November 2026
- Visa: Merchant surcharging Q&A, states as of 15 February 2024, checked 20 November 2026
Last updated .
PaidFront brake pads and rotors, settled to your wallet$428.00
Paid before the keys go back.
The repair order came by card.
Set up in under a minute. Your first payment can settle today.
- Repair orders paid by card
- No monthly fee
- Settles to your wallet
Moving a lot of volume? Talk to our team