Take card payments for transfers, with the money in your own wallet.

Card networks treat money transfer as a category of its own, and processors list remittance companies and money services businesses as restricted. Railbed takes your senders’ and clients’ cards and settles each payment to your company’s wallet, while your licences and payouts stay yours.

  • Your wallet, your payouts
  • Nothing held back
  • No monthly fee

Press the card to run an example sale.

Settles to
Your own wallet, as USDC on Polygon
Chargebacks
Settled sales can’t be pulled back. Card disputes go to the provider
To start
An email, your website and a payout wallet. No setup fee, no monthly fee
Buyer ID checks
Providers decide. Smart Routing picks the one least likely to ask

How can a licensed remittance company accept card payments from its senders?

A licensed remittance company can accept senders’ cards with a card checkout that settles to its own wallet. Processors restrict remittance and money services businesses, and card networks treat money transfer as a category of its own. Railbed takes card payments for a company’s transfers and fees and settles each one to the company’s own wallet, usually within minutes, with nothing held back. It doesn’t send payouts or hold customer funds, and it doesn’t change a company’s licensing, anti-money-laundering or remittance disclosure duties.

Why do processors refuse remittance and cross-border payment companies?

Money transfer is the business processors and banks handle most carefully, because it is the one most often used to move money that shouldn’t move. A transfer paid out abroad can’t be recalled, a stolen card can be turned into cash in another country within minutes, and a licensed transfer company has to show a long list of state licences and anti-money-laundering controls before anyone signs it. Even honest companies with every licence meet a short answer.

Money services businesses are losing access to banking services

FinCEN and the federal banking agencies, 2005
FinCEN

The processors’ and networks’ own rules spell out the distance they keep

  • Stripe’s restricted businesses list, last updated 22 September 2026, puts “Money transmitters, remittances, currency exchange services, and other money service businesses” in a tier that needs its sales team, prohibits “Peer-to-peer money transmission” and “Money orders and traveler’s checks”, and in Mexico prohibits “Cross-border currency exchange services”.
  • PayPal’s acceptable use policy, last updated 4 November 2026, prohibits activities that “involve currency exchanges or check cashing businesses”, and needs pre-approval for “Providing payment services which would fall under the definition of a money service business or an electronic money institution”.
  • Visa’s merchant data standards manual, October 2026, gives money transfer its own category, MCC 4829, for merchants that “allow customers to transfer funds via an electronic funds transfer / wire transfer / remittance to a named entity”, and sends foreign currency, money orders and account funding to MCC 6051.

A dedicated category is how the card networks keep watch, and it’s also how issuers price the transaction. Citi’s guide to sending money with a credit card warns that “your credit card issuer may consider it a cash advance”, with a cash advance fee and a higher interest rate. A sender who meets that once may not try again, and a processor who sees disputes from surprised senders sees one more reason to stay out.

Banks have pulled back for longer than processors have. As far back as 2005, FinCEN and the federal banking agencies said in a joint statement that “Money services businesses are losing access to banking services as a result of concerns about regulatory scrutiny, the risks presented by money services business accounts, and the costs and burdens associated with maintaining such accounts”. The same statement said the law doesn’t expect banks “to serve as the de facto regulator of the money services business industry”. Two decades on, a remittance company still spends real effort keeping its bank accounts open, and a card processor is one more relationship that can end.

Then there’s the arithmetic. The World Bank puts the global average cost of sending $200 at 6.36%, and its September 2025 report puts the average from the United States at 5.04%. A card fee taken out of that margin leaves little, which is why many transfer companies steer senders to bank transfers and debit cards before a credit card.

How does Railbed fit a licensed transfer business?

Railbed is the collection leg only. Your sender or client pays with the card they already have, an independent licensed card provider charges it, and the payment settles as USDC, almost always on Polygon, straight to your company’s wallet. From there your company pays out through its own partners, under its own licences, exactly as it does today.

What goes wrong todayWith Railbed
“Remittance” or “money services business” puts you in a processor’s restricted tierNo underwriting and no application to pass. Sign up with an email, your website and a payout wallet
A processor holds part of each payment against disputes from sendersNothing is held back from your sales
A bank or processor ends the relationship and holds the last weeks’ moneyEach paid payment is already in your company’s own wallet
Volume caps throttle a corridor that’s growingNo cap on monthly sales
A dispute on a transfer already paid out abroad comes back months laterSettled payments can’t be pulled back from your wallet. Card disputes go to the provider that charged the card
One acquiring bank declines senders’ cards from abroadSmart Routing sends each payer to the card provider most likely to approve them

Railbed checks that the right amount reached the right wallet before it marks a payment Paid, and each settlement is a public Polygon transaction your compliance team can match to a transfer. Railbed never holds your money. It can stop new payments on an account only when the law requires it.

The collection leg only: what Railbed does and doesn’t do

This page is for companies that already hold the licences their business needs, or are getting them. Railbed doesn’t change what a transfer business is. Be precise about the split:

Railbed does:

  • Take a card payment for the amount you set, through a licensed card provider.
  • Settle it as USDC to your company’s wallet and confirm the amount before marking it Paid.
  • Tell your systems with a signed webhook, so you can release a payout when the money is in.
  • Keep a record of each payment, with the details you asked the payer for.

Railbed doesn’t:

  • Send payouts. It never pays your recipients, contractors or suppliers, and never splits a payment to a third party. Every payment settles to your wallet and nowhere else.
  • Hold customer funds. There’s no Railbed balance and no custodial account. Once a payment settles, the USDC is in your wallet and is your company’s to handle under your licences.
  • Do your compliance. Your customer identification, sanctions screening, transaction monitoring, suspicious activity reporting and remittance disclosures stay with you. A card provider’s identity check on the payer, when it runs one, is the provider’s, not your customer due diligence.
  • License you. Railbed isn’t a money transmitter, a bank or a sponsor for your licences, and using it doesn’t change which licences you need.

Licences: FinCEN registration, state licences and the model law

No lawyer has read this page. It describes what the published rules say, and how they apply to your company is a question for your own counsel.

Federal registration. A money services business registers with FinCEN under 31 CFR 1022.380. The rule sets a two-calendar-year registration period and requires renewal for each period after it. Registration sits beside the other Bank Secrecy Act duties in part 1022: an anti-money-laundering programme, and suspicious activity reports on transactions that involve “at least $2,000” when the business suspects a problem, under section 1022.320.

Records for larger transfers. Under 31 CFR 1010.410(e), a financial institution other than a bank keeps specified records for “a transmittal of funds in the amount of $3,000 or more”. A transfer paid by card through Railbed is still your transmittal, and the records are yours to keep.

State licences. Nearly every state licenses money transmitters, and most require a licence where the sender is, not only where the company sits. The Conference of State Bank Supervisors’ Money Transmission Modernization Act defines money transmission to include “Receiving money for transmission from a person located in this state”. As of November 2026, CSBS says 31 states have enacted it in full or in part, and that licensees in at least one adopting state “collectively account for 99% of reported money transmission activity”.

The agent-of-the-payee exemption is narrow. The model law exempts a company appointed “as an agent of a payee to collect and process a payment from a payor to the payee for goods or services, other than money transmission itself”, with conditions including a written agreement and that the payer’s obligation is extinguished on payment. A B2B payments firm collecting a supplier’s invoice may look at it. A remittance company can’t, because its service is money transmission itself.

Permissible investments and USDC. The model law requires a licensee to keep “permissible investments that have a market value ... of not less than the aggregate amount of all of its outstanding money transmission obligations”. Its list of cash and cash equivalents includes “debit card or credit card-funded transmission receivables owed by any bank”, but a stablecoin balance in your own wallet isn’t on the part of the list quoted here. CSBS has issued implementation guidance on stablecoins and tangible net worth, linked from its MTMA page. Whether USDC received through Railbed counts toward your permissible investments, or must be converted to dollars quickly, is a question for your regulator and counsel before your first live payment.

The Remittance Rule and the new remittance tax

Two federal rules shape what a US transfer business shows senders and what it collects from them. Neither changes because a sender pays by card through Railbed.

The CFPB’s Remittance Rule. Subpart B of Regulation E covers remittance transfers from US consumers to recipients abroad. A provider owes the sender disclosures before and after payment under 12 CFR 1005.31, a right to cancel a transfer requested “no later than 30 minutes” after payment under section 1005.34, and error resolution. Under section 1005.30, a company that provided 500 or fewer remittance transfers in the previous calendar year and provides 500 or fewer in the current one is deemed not to provide them in the normal course of its business. Above that, the rule applies in full.

A cancelled transfer is refunded in full, fees included. Section 1005.34 requires the provider to refund the total amount the sender provided, including fees, when a sender cancels in time. Railbed’s fees come out of what arrives, so on a cancelled card-funded transfer the card provider’s, network and Railbed fees are a cost your company carries. Price for it.

The remittance transfer tax. Section 4475 of the Internal Revenue Code, added by the law signed on 4 July 2025, imposes a 1% tax on certain remittance transfers made after 31 December 2025. As the Treasury’s proposed regulations, published on 13 April 2026, explain, the tax applies only to transfers for which the sender provides “cash, a money order, a cashier’s check, or any other similar physical instrument”, and the statute excludes transfers withdrawn from an account at a covered financial institution or “funded with a debit card or a credit card issued in the United States”. The sender pays the tax, and the provider collects it.

A card payment through Railbed reaches you as USDC from a card provider, not as a card settlement from an acquirer. How the card exemption reads for that flow is a question for your tax adviser. Don’t assume either answer.

What the numbers look like: margins, fees and the sender’s card

A transfer company lives on thin margins, and card collection costs more than a bank transfer. Be clear-eyed about it before you switch a corridor:

  • What senders are used to paying. The World Bank’s global average for sending $200 is 6.36%, and from the United States 5.04%. Those figures include the provider’s fee and its exchange-rate margin.
  • What Railbed costs. The card provider’s own fee and exchange spread, which the payer sees on the provider’s page, a 1% network fee, and the Railbed fee, from 0.9%. All of it comes out of the USDC that arrives.
  • What that means for a $200 transfer. On small transfers, card collection through Railbed can cost as much as a sender pays for the whole transfer elsewhere. It fits best where card payment is worth it to the sender: a sender with no bank account, an urgent transfer, a corridor your current processor won’t serve, or larger business payments where the percentage matters less.
  • The sender’s own issuer. A credit card issuer may treat a money transfer, or a card purchase of crypto, as a cash advance. Citi says so for money transfers, and Experian notes that some issuers “block crypto purchases or bill them as cash advances”. The card provider uses the payment to buy the USDC that settles to you, so tell senders a debit card avoids that.

The buyer pays the price you set. If your price for a $200 transfer is $204.99 including your fee, the sender pays $204.99, and Railbed’s fees come out of what arrives. Set your card price so that what arrives still covers the payout and your margin.

What transfer businesses collect through Railbed

Each of these is a payment to your company for a service it provides under its own licences, priced in USD, EUR, GBP, CAD, AUD, INR or SEK and paid by card:

  • Remittance companies. The sender starts a transfer in your app or on your site, passes your checks and sees your disclosures. Your server then creates a Railbed payment for the exact amount through the merchant API and opens its hosted page. When the payment is Paid, you release the payout.
  • Contractor payout services. A client funds a payout run, or pays your platform fee, by invoice. Paying the contractors stays with your own payout partners, in their currencies or in USDC.
  • International B2B payment firms. Invoice a client for a supplier payment plus your fee. An invoice takes up to 50 lines and 100,000.00, with a due date, part payments and your terms printed on it.
  • Visa, relocation and student payment services. Fees for arranging a payment abroad, where your company is the one being paid for its service.
  • Fees on their own. Some firms collect the transfer amount by bank transfer and only the service fee by card. Railbed takes that fee from a checkout page or an invoice.

Railbed is not a way to receive money on behalf of someone else’s business, and not a payout tool. A company that would need it to be either is the wrong fit, as the section below says. A money app that charges for its own plans and reports, rather than for transfers, is closer to the businesses on the fintech page.

How a card-funded transfer works

  1. A sender in your app asks to send $200 home. You run your customer checks, screen the recipient, and show your prepayment disclosure: $200 to the recipient, a $4.99 fee, $204.99 to pay, the exchange rate and the amount that will arrive.

  2. Your server creates a Railbed payment for $204.99 through the merchant API and opens its hosted page for the sender.

  3. The sender pays by card. Smart Routing picks the card provider most likely to approve their card, and the provider decides whether to ask for identity details on its own page.

  4. The provider buys USDC with the payment, and it’s forwarded to your company’s wallet on Polygon. Railbed checks that the right amount arrived and marks the payment Paid.

  5. Your server receives a signed payment.paid webhook, matches it to the transfer and releases the $200 payout through your partner abroad.

  6. You send the sender your receipt with the details the Remittance Rule requires, and the cancellation window runs from payment as your process says.

Run the whole flow in Test mode first. Payments are simulated, no card is charged, and Test webhooks still reach your server, so you can test the hand-off to your payout system without moving money.

Stolen cards, structuring and the card leg

Release payouts only on Paid. A payout released before Railbed marks the payment Paid is a payout funded by nothing. Wait for the signed webhook, check its signature as the signatures guide shows, and treat each event once.

A settled payment stays settled, but the risk is still yours. If a cardholder disputes a transfer, the dispute goes to the card provider that charged the card, and a settled payment can’t be pulled back from your wallet. That protects the money you collected. It doesn’t make a transfer paid with a stolen card a good transfer: your monitoring, and your duty to report suspicious activity, still apply.

The payer’s identity checks are not yours. A card provider may ask a payer for a name, date of birth or address, and Smart Routing sends payers to the providers least likely to ask. Neither replaces your own customer identification. Run your checks before the payment, in your own flow.

Paying in parts is not for splitting a transfer. Invoices can be paid in parts, which suits a business client paying a large supplier invoice over two weeks. They are not a way to break one transfer into smaller ones to stay under a reporting line. Money laundering and structuring are among the few things Railbed’s acceptable use policy names, because the law forbids Railbed itself from taking part in them, and sanctions are another.

Funding payouts from USDC

Every payment arrives in your wallet as USDC on Polygon, usually within minutes, which is faster than most card settlements. What you do next depends on your payout partners and your regulator:

  • Convert to dollars. Send the USDC to an exchange or off-ramp your company uses and withdraw to your operating account, as the guide to moving money to your bank describes.
  • Fund partners who take stablecoins. Some payout partners accept USDC to fund local payouts. That is a relationship between your company and them.
  • Keep your ledger straight. Match each settlement to its transfer by the payment’s id. Home shows what you received in dollars, and each payment shows its Polygon transaction.

Two cautions from the licensing section bear repeating. Ask your regulator whether a USDC balance counts toward your permissible investments. And the GENIUS Act, which takes effect on 18 January 2027, sets federal rules for stablecoin issuers, not for a company that receives a stablecoin as payment, so it doesn’t answer your state regulator’s questions for you.

A short history of transfer rules and costs

Most of the rules a card-funded transfer meets today are less than two years old:

  1. Jul 2020

    The CFPB’s safe harbour lets a company that sends 500 or fewer remittances a year stay outside the Remittance Rule.

  2. Jul 2025

    The GENIUS Act becomes law, setting federal rules for issuers of payment stablecoins.

  3. Jul 2025

    Congress adds section 4475 to the tax code: a 1% tax on remittances funded with cash or similar instruments.

  4. Aug 2025

    Executive Order 14331 tells regulators to stop “politicized or unlawful debanking”, naming payment processing.

  5. Sep 2025

    The World Bank’s latest report puts the global average cost of sending $200 at 6.36%.

  6. Jan 2026

    The remittance transfer tax applies to transfers made after 31 December 2025.

  7. Apr 2026

    The Treasury proposes rules for collecting the tax; the statute already leaves out transfers funded with US-issued cards.

  8. Nov 2026

    CSBS reports 31 states have enacted the Money Transmission Modernization Act in full or in part.

  9. 18 Jan 2027Ahead

    The GENIUS Act and the OCC’s rules under it take effect.

The fair banking order doesn’t oblige anyone to bank you. Executive Order 14331 directs regulators to remove “reputation risk or equivalent concepts” from their guidance and covers “payment processing services”. It doesn’t give a money services business the right to an account, and as of November 2026 a bank or processor can still decline one on its own risk rules.

Before your first card-funded transfer

  • Counsel’s sign-off on the flow. Walk your counsel through the card leg: sender pays by card, USDC settles to your wallet, you pay out. Ask about each state you serve and about permissible investments.

  • A company wallet with controls. Every payment settles there, so use a self-custody wallet your company controls, with keys held under the same controls as your other treasury credentials. The wallet guide covers the choice.

  • Your checks before the payment. Customer identification, sanctions screening and the recipient’s details belong in your flow before you create the Railbed payment.

  • Disclosures that include the card route. Your prepayment disclosure and receipt should show what the sender pays by card. The card provider’s page shows its own terms too.

  • A card price that covers the fees. Set the card price so that what arrives after fees still covers the payout, a possible cancellation refund and your margin.

  • Payouts tied to the webhook. Release a payout only on a signed payment.paid event, and test it end to end in Test mode.

  • A conversion plan. Decide how quickly you convert USDC to dollars, and who in your company does it.

  • Your tax adviser’s view. Ask how the remittance tax’s card exemption reads for your flow.

Running Railbed beside your current collection methods

Most transfer companies collect money several ways already. Railbed adds a card route without replacing the others.

Refunds, cancellations and disputes

Cancellations under the Remittance Rule. If a sender cancels within the window, you refund the full amount they paid, fees included. Railbed can’t reverse a settled payment, so you refund from your own funds: send USDC back or agree another arrangement with the sender, such as a refund to a bank account. Railbed’s fees on that payment aren’t returned.

A transfer that can’t be paid out. If a payout fails, your terms and the Remittance Rule’s error resolution decide what you owe the sender. The refund is yours to send, the same way.

Disputes. If a sender goes to their bank, the dispute goes to the card provider that charged the card, and a settled payment can’t be pulled back from your wallet. There’s no chargeback fee and no chargeback ratio for you to manage. Keep the transfer’s records, because the sender’s complaint about the transfer itself is still yours to answer.

Deleting a sender’s details. Delete customer data removes a customer’s personal details from Railbed. Your own record-keeping duties under the Bank Secrecy Act usually mean you keep your copy for years, so check before you delete anything of your own.

What stays your responsibility

Railbed takes the card payment and confirms it reached your wallet. Everything about the transfer stays yours:

  • Licences and registration. FinCEN registration, state licences in every state you serve, and licences abroad where your recipients’ payouts are made.
  • Anti-money-laundering and sanctions. Your programme, customer identification, screening, monitoring, suspicious activity reports and records.
  • Remittance disclosures and rights. Disclosures, receipts, cancellations and error resolution under Regulation E.
  • Payouts. Every payment to a recipient, contractor or supplier, through your own partners.
  • Safeguarding. Permissible investments, net worth and bonds as your licences require, and whether USDC counts.
  • Tax. The remittance transfer tax where it applies, and your company’s own returns.
  • Your keys. The wallet that receives payments is yours to secure. Railbed never asks for a seed phrase or private key.

Using Railbed doesn’t change any of these duties.

Fees and getting paid

Railbed shows every fee before anyone pays. Fees come out of the USDC that arrives: the card provider’s own fee and exchange spread, which the payer sees on the provider’s page, a 1% network fee, and the Railbed fee, from 0.9%, shown in your dashboard. There’s no setup fee and no monthly fee. The payer pays the price you set.

Settlement is almost always USDC on Polygon, straight to your wallet, usually within minutes. A few card providers pay on another network, such as Ethereum, and Railbed’s guide lists them. Nothing is held back from your sales.

Card providers each set a smallest payment, roughly $2, and $10 or more gives payers the widest choice of providers. A single invoice or checkout goes up to 100,000.00. A larger business payment can be split across invoices, which is a convenience for a real client, never a way around a reporting line.

Railbed compared with a money transfer merchant account

Money transfer merchant account (MCC 4829)Railbed
To applyLicences, compliance programme, bank references and processing historyAn email, your website and a payout wallet. No underwriting and no application to pass
How issuers see itA money transfer, which some issuers bill as a cash advanceA card purchase of USDC from the provider, which some issuers also bill as a cash advance
ReserveOften a share of each payment held backNothing is held back from your sales
ChargebacksFees, a ratio to stay under, and the payment pulled from your balanceSettled payments can’t be pulled back. Card disputes go to the provider
Payouts to recipientsNot the processor’s job eitherNot Railbed’s job. You pay out through your own partners
SettlementDollars on the processor’s scheduleUSDC to your own wallet as each payment settles

When Railbed is not the right fit

Railbed suits a licensed company collecting card payments for its own transfers and fees. It is the wrong tool in these cases:

  • You need someone to carry your licences. Railbed doesn’t license you or stand in for a licensed partner. Which licences you need stays between you and your regulators.
  • You need payouts. Railbed never pays recipients, contractors or suppliers, and never splits a payment.
  • Your margins can’t carry card fees. On small transfers, the card provider’s fee and Railbed’s fees can be most of what senders expect to pay. Bank transfers and debit networks may suit those senders better.
  • Your regulator won’t accept USDC. If your permissible investments must be in dollars at once and you can’t convert quickly, card collection that settles as USDC is a poor match.
  • You collect money on behalf of other businesses. Taking payments for other merchants and paying them out is payment facilitation, a different business with rules of its own.
  • You want dollars in your bank automatically. Payments settle as USDC to your wallet, and moving money to a bank is your step.

The trade’s payment words

Money services business
FinCEN’s term for money transmitters, currency dealers, check cashers and similar firms, which register with it.
Money transmitter licence
A state licence to receive money for transmission. Most states require one where the sender is.
MTMA
The Money Transmission Modernization Act, the CSBS model law that 31 states have enacted in full or in part.
MCC 4829
Visa’s category for money transfer merchants, which move funds by wire, remittance or original credit transaction.
Quasi-cash
Card purchases of cash-like items such as money orders, foreign currency or crypto, which issuers often bill as cash advances.
Cash advance
A card transaction an issuer treats like borrowing cash, with its own fee and usually a higher interest rate from day one.
Remittance transfer
Under Regulation E, an electronic transfer of money from a US consumer to a person or business abroad.
Permissible investments
Assets a licensed transmitter must hold, at least equal to what it owes customers for unpaid transfers.
Agent of the payee
A company collecting payments for a business’s goods or services, which the model law exempts in narrow conditions.
Remittance transfer tax
The 1% US tax on cash-funded remittances under section 4475, in force for transfers after 31 December 2025.

Questions

Why do Stripe and PayPal refuse remittance companies?

Their lists treat money transfer as a high-risk category. Stripe restricts money transmitters, remittances and other money service businesses and prohibits peer-to-peer money transmission. PayPal prohibits currency exchanges and check cashing and needs pre-approval for payment services that would make a business a money service business.

Does Railbed send the payout to my recipient?

No. Railbed collects the card payment and settles it as USDC to your company’s wallet. Paying recipients, contractors or suppliers stays with your own payout partners and licences.

Do I still need money transmitter licences if I use Railbed?

Yes, whatever your business needs today. Railbed isn’t a money transmitter for you and doesn’t change which licences you need. Ask your counsel about each state you serve.

Does the 1% remittance tax apply to card-funded transfers?

The tax covers transfers funded with cash, money orders, cashier’s checks and similar instruments, and the statute leaves out transfers funded with a debit or credit card issued in the United States. How that reads for a card payment that reaches you as USDC is a question for your tax adviser.

Will the sender’s card issuer charge a cash advance fee?

It can happen with a credit card. Citi warns that issuers may treat a money transfer as a cash advance, and the card provider uses the payment to buy USDC, which some issuers treat the same way. A debit card avoids that.

Does a card provider’s ID check count as my customer due diligence?

No. A provider may ask a payer for a name, date of birth or address on its own page, but your customer identification, sanctions screening and records stay yours, in your own flow.

What if a sender cancels within 30 minutes?

Under the Remittance Rule you refund the full amount they paid, fees included. Railbed can’t reverse a settled payment, so you send USDC back or agree another arrangement, and Railbed’s fees on that payment are a cost you carry.

Can I collect a business client’s supplier payment by invoice?

Yes, if your licences cover the service. An invoice takes up to 50 lines and 100,000.00, a due date, part payments and your terms, and settles each payment to your wallet as it’s made.

Can I hold the USDC as my permissible investments?

Ask your regulator. The model law’s list of cash equivalents doesn’t name stablecoins in the part quoted on this page, and states read their own rules. Many companies convert to dollars soon after each settlement.

What happens if a sender disputes a transfer?

The dispute goes to the card provider that charged the card, and a settled payment can’t be pulled back from your wallet. Your records of the transfer, and your answer to the sender, are still yours.

What does it cost to collect a transfer by card?

Fees come out of the USDC that arrives: the card provider’s own fee and exchange spread, shown to the payer on the provider’s page, a 1% network fee, and the Railbed fee, from 0.9%. There is no setup fee and no monthly fee.

Can Railbed freeze my company’s money?

No. Every paid payment settles straight to a wallet your company controls, so there’s no Railbed balance to hold. Railbed can stop new payments on an account only when the law requires it, and can never touch USDC that has already reached your wallet.

Can senders abroad pay me by card?

Yes. Price in USD, EUR, GBP, CAD, AUD, INR or SEK, and Smart Routing finds a card provider that serves the payer’s country. Your licences decide where you may take senders from.

How do I get the money into my company’s bank account?

Send USDC from your wallet to an exchange or off-ramp your company uses, then withdraw to your bank account, or fund payout partners who take USDC. Your treasury team chooses when.

Sources

  1. World Bank: Remittance Prices Worldwide, checked 20 November 2026
  2. World Bank: Remittance Prices Worldwide quarterly, issue 54, September 2025, checked 20 November 2026
  3. Federal Register: Excise tax on remittance transfers (proposed regulations), 13 April 2026, checked 20 November 2026
  4. CSBS: Money Transmission Modernization Act adoption, 17 November 2026, checked 20 November 2026
  5. CSBS: Money Transmission Modernization Act (model law text), August 2023, checked 20 November 2026
  6. eCFR: 12 CFR 1005.34, procedures for cancellation and refund of remittance transfers, current text, checked 20 November 2026
  7. eCFR: 12 CFR 1005.31, disclosures, current text, checked 20 November 2026
  8. CFPB: 12 CFR 1005.30, remittance transfer definitions, with official interpretation, checked 20 November 2026
  9. Stripe: Prohibited and restricted businesses, last updated 22 September 2026, checked 20 November 2026
  10. PayPal: Acceptable Use Policy, last updated 4 November 2026, checked 20 November 2026
  11. Visa: Visa Merchant Data Standards Manual, October 2026, checked 20 November 2026
  12. Citi: How to send money with a credit card, checked 20 November 2026
  13. Experian: Can you buy crypto with a credit card?, checked 20 November 2026
  14. FinCEN: Joint statement on providing banking services to money services businesses, 30 March 2005, checked 20 November 2026
  15. eCFR: 31 CFR 1022.380, registration of money services businesses, current text, checked 20 November 2026
  16. eCFR: 31 CFR part 1022, rules for money services businesses, current text, checked 20 November 2026
  17. eCFR: 31 CFR 1022.320, reports by money services businesses of suspicious transactions, current text, checked 20 November 2026
  18. eCFR: 31 CFR 1010.410, records to be made and retained by financial institutions, current text, checked 20 November 2026
  19. OCC: Bulletin 2026-50, implementing the GENIUS Act, October 2026, checked 20 November 2026
  20. Federal Register: Executive Order 14331, Guaranteeing Fair Banking for All Americans, 12 August 2025, checked 20 November 2026

Last updated .

PaidA transfer home, fee included, settled to your wallet$204.99

Collected here, paid out there.
Your rails, your licences.

Set up in under a minute. Your first payment can settle today.

  • Your wallet, your payouts
  • Nothing held back
  • No monthly fee

Moving a lot of volume? Talk to our team