Get paid by the practices you bill for, with no patient data attached.
Billing companies and health software vendors wait on practices that wait on payers, and a clearinghouse outage can stop both. Railbed lets you invoice each practice by card for your fee, plan or project, with nothing held back, and settles each payment to a wallet you control.
- Nothing held back
- No setup fee
- Settled sales stay yours
Press the card to run an example sale.
- Settles to
- Your own wallet, as USDC on Polygon
- Chargebacks
- Settled sales can’t be pulled back. Card disputes go to the provider
- To start
- An email, your website and a payout wallet. No setup fee, no monthly fee
- Buyer ID checks
- Providers decide. Smart Routing picks the one least likely to ask
How can a medical billing company take card payments from its clients?
A billing company can invoice each practice for its fee through Railbed. The practice pays by card through an independent, licensed card provider, and the payment settles to the billing company’s own wallet, with nothing held back. Railbed collects only the company’s own fees: payer reimbursements stay in the practice’s accounts, and invoices should carry no patient data, because Railbed makes no HIPAA compliance claim and isn’t built to hold health information.
Where a billing company’s own payments go wrong
A medical billing company spends its days getting other people paid. Its own income arrives last: after the payer pays the practice, after the practice reconciles the remittance, after someone at the practice gets round to the billing company’s invoice. Health software vendors sit in the same queue, billing practices for licences, implementation and support that practices pay when cash allows.
- 80%Practices that lost revenue from unpaid claims after the Change Healthcare attack
- 192.7MPeople Change Healthcare told HHS were affected by its breach, in July 2025
- 4–9%Of net collections, a common fee for outsourced medical billing in 2026
billing companies rarely engage in receiving payment on behalf of their provider clients
February 2024 showed how thin that queue is. When a cyberattack took down Change Healthcare, a clearinghouse that handles a large share of US claims, practices stopped being paid. The American Medical Association’s surveys that April found that 80% of practices had lost revenue from unpaid claims, 78% from claims they couldn’t submit, and 85% had put extra staff time into working around it. Weeks later, 85% still had disrupted claim payments and 79% couldn’t receive electronic remittance advice. A billing company paid a share of collections earned nothing on claims that couldn’t move, and practices short of cash paid their vendors last.
The fee model adds its own pressure. Billing companies commonly charge a percentage of what they collect, a flat monthly fee or a price per claim, as MGMA describes. A percentage keeps the company’s income tied to payers’ timing, so an outage, a payer’s backlog or a denied batch lands on the billing company’s own cash flow a month later.
Then there is the data. Billing is one of the functions HHS names in its guidance on business associates, so a billing company holds patients’ health information under a business associate agreement. The invoices it sends its own clients are a different thing, and they shouldn’t carry any of that information at all.
What billing companies and software vendors run into
- A practice pays its billing company by check or bank transfer weeks after the invoice, and the company chases it by email.
- A payer delay or a clearinghouse outage cuts the practice’s cash, and the vendor’s invoice waits behind payroll and rent.
- A practice that ends the contract disputes the last month’s card charge, and the refund comes out of the company’s balance with a fee on top.
- Invoices built from billing reports carry claim details and patient names into email and accounting systems that were never meant to hold them.
How does Railbed fit a billing company?
Railbed is online card checkout that never holds your money. You send a practice an invoice, the practice pays it with a company card through an independent licensed card provider, and the payment settles as USDC straight to a wallet you control, usually minutes after they pay. Signing up takes an email, your website and a payout wallet.
| What goes wrong today | With Railbed |
|---|---|
| Checks and transfers arrive weeks after the invoice | Invoices paid by card, with reminders before and after the due date |
| A practice short of cash pays nothing until it can pay everything | Part payments with a smallest first payment you set |
| A disputed final invoice comes out of your balance with a fee | Settled sales can’t be pulled back from your wallet; card disputes go to the provider that charged the card |
| A processor reviews the account after a large implementation fee | No cap on monthly sales, and nothing is held back from your sales |
| Account managers send invoices from their own spreadsheets | A Sales role that makes, sends and changes only its own invoices |
| Clients abroad, or a team abroad, wait on international wires | Clients pay by card, and you’re paid in USDC wherever your company is |
Railbed checks that the right amount reached the right wallet before it marks a payment Paid, and every settlement is a public Polygon transaction you can check yourself. It never touches claims, remittances or payer money.
Your fee, never the practice’s money
Railbed takes payments that belong to your company: your fee, your software plan, your project. It doesn’t collect payer reimbursements or patient balances for your clients, and it doesn’t pay money on to third parties. That line matches how the rules already draw it.
Medicare’s reassignment rules let it pay a billing agent only on strict terms. Under 42 CFR 424.73(b)(3), an agent may receive payment for a provider only if, among other things, its “compensation is not related in any way to the dollar amounts billed or collected”, is “not dependent upon the actual collection of payment”, and the agent acts under payment instructions the provider may change or revoke. HHS’s Office of Inspector General, in its compliance guidance for third-party medical billing companies, notes that “As a result of the limitations on reassignment, billing companies rarely engage in receiving payment on behalf of their provider clients or negotiating checks on behalf of their provider clients.”
So payer money goes to the practice’s own account, and the billing company bills the practice for its work. Railbed is for the second step only. Whether your contracts, your fee basis and your access to a practice’s accounts meet Medicare’s rules and your state’s is a question for your health care lawyer.
When a practice wants to take its own patients’ payments by card, the practice opens its own Railbed account, with its own payout wallet. If it wants your help running it, it can add you to its team: a person can belong to several businesses on Railbed and switch between them, and a Manager works with checkouts, invoices, orders and customers. The money settles to the practice’s wallet, never to yours.
Keep patient data out of invoices
A billing company’s invoice to its client is a business document between two businesses. It needs the period, the work, the price and the terms. It doesn’t need a patient’s name, a date of service, a member ID, a claim number tied to a person or a diagnosis, and every one of those turns an ordinary invoice into protected health information sitting in email, PDFs and your accounting software.
HHS’s business associate guidance says a business associate agreement must contain the elements set out in 45 CFR 164.504(e), and covers what a business associate may do with the information it receives. Railbed makes no HIPAA compliance claim and isn’t built to hold health information, so treat it as you would any vendor that must never receive PHI: send it none. Write invoices like these:
| Instead of | Write |
|---|---|
| Claims for J. Ortiz, DOS 10/03, member 88412 | Claims submitted, October: 410 |
| Appeal for denied claim 2026-55120 | Denial appeals, October: 12 |
| Credentialing for Dr. Lee at three payers | Provider credentialing, three enrolments |
| Coding audit, cardiology charts for Q3 | Coding audit, third quarter |
| Patient statements mailed for the practice’s balances | Patient statement service, October |
Keep the detail behind those lines in the report you already send through your HIPAA-compliant channel, and put that report’s number in the invoice’s reference field, which takes up to 64 characters. The practice can match the two without the invoice repeating what the report says. Railbed’s checkout asks the payer for an email and, if you choose, a name, company, phone or address, all about the business paying.
What billing companies and vendors invoice for
Billing companies and health software vendors use Railbed for the fees practices pay them directly:
- Monthly billing fees. A flat fee, a price per claim or a share of collections for the month, as one invoice with a line for each.
- Setup and onboarding. Taking over a practice’s billing, cleaning up old accounts receivable, building payer enrolments.
- Credentialing and enrolment. A price per provider per payer, or a package, paid at the start or in parts.
- Coding and audits. Chart audits, coding reviews and compliance programmes, billed per project.
- Software licences. A year of practice management, scheduling, patient messaging or coding software for a practice, paid up front or in parts.
- Implementation and training. Data migration, interfaces and staff training, paid as a deposit and a balance.
- Consulting. Revenue cycle assessments and denial management projects, billed against a scope.
Each one is a payment a practice chooses to make. Railbed never stores a card and never charges one later, so nothing on this list renews by itself.
Which tool fits which charge
Most billing companies need invoices and nothing else. Software vendors often add a pricing page or a checkout inside their product. Match the charge to the tool:
| What you charge for | What to use | What you build |
|---|---|---|
| A month of billing work for one practice | An invoice with a line per service and a due date | Nothing. Send it by email or share its link |
| A setup project paid as deposit and balance | An invoice with part payments on and a smallest first payment | Nothing. Each part settles to your wallet as it’s paid |
| Software plans by tier | A pricing table on your pricing page | Nothing. Each choice is one payment, not a schedule |
| A fixed-price audit or training package | A checkout page linked from your proposal | Nothing |
| An upgrade bought inside your product | A checkout session for each order, from the REST API | One API call and one webhook handler |
Railbed emails invoices, reminders and receipts in your company’s name, with the invoice’s PDF attached. Each invoice records who created it and who owns it, and owners and managers can see what each account manager has sent and what’s still unpaid.
Software plans without automatic charges
Railbed has no recurring billing. It never stores a card and never charges one on a schedule, so a software plan doesn’t renew by itself. A / mo or / yr label on a pricing table describes the plan; it doesn’t schedule another charge. Vendors sell plans in one of three ways:
- A year up front. One payment for twelve months of the licence. It suits practices with a budget for the year, and it puts the year’s revenue in your wallet on the first day.
- A year in parts. One invoice for the year, part payments on, and a smallest first payment such as the first quarter. The practice pays the rest as it chooses before the due date.
- An invoice each cycle. A new invoice each month for practices that want to pay as they go, with reminders around each due date.
The cost is that a practice may not pay the next invoice where a stored card would have charged it. For a vendor, that is also a signal: an unpaid invoice is a conversation about the account, not a failed charge discovered weeks later.
Percentage, flat and per-claim fees
Railbed takes the amount on your invoice, whatever it was calculated from. How you calculate it carries its own rules. The OIG’s 1998 guidance says that “The OIG has a longstanding concern that percentage billing arrangements may increase the risk of upcoding and similar abusive billing practices”, and asks billing companies paid by percentage to watch for exactly that in their compliance programmes. Some states also restrict fee-splitting with physicians, and your lawyer will know whether yours is one.
Whatever the basis, write the invoice so a practice can check it in one look: the period, the measure (claims submitted, collections received, hours, providers enrolled), the rate and the total. Put the rate and payment terms in the invoice’s terms, which take up to 2,000 characters, and send the detailed report separately.
A percentage fee also moves with payers’ timing. When collections fall, as they did for practices in the weeks after February 2024, the month’s invoice falls with them, and a practice short of cash may ask to pay it in parts. An invoice with part payments on lets them pay what they can now and the rest later, while the balance stays visible to both of you.
When a clearinghouse goes down
The Change Healthcare attack began on 21 February 2024 and took weeks to work through. HHS’s questions and answers on the incident record that on 31 July 2025 Change Healthcare told HHS’s Office for Civil Rights that about 192.7 million people were affected. For billing companies, the lesson was about concentration: when one link in the claims chain stops, everything paid through it stops too.
Railbed doesn’t touch claims, so it can’t fix a claims outage. What it changes is your own side of the ledger. A practice pays your invoice with a company card through a card provider, outside the claims chain, and the payment settles to your wallet. If the practice’s cash is short, part payments let it keep paying something. Keep your clearinghouse, your practice management system and your payer connections exactly where they are.
The rules that moved under billing companies
- Dec 1998
HHS-OIG publishes compliance guidance for third-party medical billing companies
- 25 Jan 2013
HHS’s Omnibus Rule makes business associates directly liable under the HIPAA rules
- 21 Feb 2024
A cyberattack takes down Change Healthcare, and claims and payments stall across the US
- Apr 2024
AMA surveys find 80% of practices lost revenue from unpaid claims after the attack
- 6 Jan 2025
HHS proposes a stricter HIPAA Security Rule for electronic health information
- 31 Jul 2025
Change Healthcare tells HHS about 192.7 million people were affected by the breach
- 19 Nov 2026
HHS publishes final HIPAA Privacy Rule changes to support coordinated care
- 19 Jan 2027Ahead
The Privacy Rule changes take effect, with compliance required by 19 July 2027
The Security Rule proposal of January 2025 had not been finalised as of November 2026; HIPAA Journal reports that the final rule now carries a proposed release date of July 2027. Business associates, billing companies among them, would be held to it directly when it comes.
Clients abroad and teams abroad
Much medical billing and coding work is done by teams outside the country of the practices they serve, and many US practices buy software from vendors abroad. That usually means international wires, intermediary bank fees and days of waiting for both sides.
With Railbed, a practice pays your invoice with its own card, on a card provider’s page, in the currency you set: USD, EUR, GBP, CAD, AUD, INR or SEK. The payment settles as USDC to your wallet wherever your company is based, and you move it to your bank through an exchange or off-ramp you use. Larger payments are more likely to need a light identity check on the provider’s page, and an invoice can total up to 100,000.00. Whether you may do business with a client in a given country, and how you report the income, stays yours to check with your accountant.
How does a payment work?
You send the practice an invoice for the month, with the period, the work and the rate on its lines.
The practice’s office manager opens it, chooses to pay in full or, if you allowed it, part of it now, and Smart Routing sends them to the card provider most likely to approve their card.
They pay on the provider’s page in a new tab. The provider decides whether to ask for identity details; smaller payments often need little or none.
The provider buys USDC with the payment, and it’s forwarded to your wallet on Polygon. Railbed checks that the right amount reached the right wallet before it marks the payment Paid.
The invoice shows what’s paid and what’s left, the practice gets a receipt in your company’s name, and an alert reaches your team on Telegram or Slack if you set one up.
Try it in Test mode first. Payments are simulated, no card is charged, and Test invoices never email a client.
Before you send your first client invoice
There’s no application to wait on. This is the short list a billing company or vendor settles once.
A payout wallet. Save the Polygon wallet your fees should settle to. Use one your company holds the keys to, not an exchange deposit address.
Invoice lines without PHI. Agree a standard set of lines with no patient names, dates of service, member IDs or claim numbers, and train whoever sends invoices.
A report reference. Number the detailed report you send each client, and put that number in each invoice’s reference field.
Fee terms in writing. Put your rate, what it’s calculated from and your payment terms in the invoice’s terms, and match them to your contract.
Roles for your team. Give account managers the Sales role so each sends and sees only their own invoices, and keep the Owner role for the people who move money.
A note about the card statement. Tell clients the charge will show the card provider’s name, so their bookkeeper doesn’t query it.
A run in Test mode. Send yourself a Test invoice, pay part of it, and check the balance, the receipt and the PDF before you bill a client.
Fees and getting paid
Railbed shows every fee before anyone pays. The practice pays the amount on your invoice, and fees come out of the USDC that arrives: the card provider’s own fee and exchange spread, which the payer sees on the provider’s page, a 1% network fee, and the Railbed fee, from 0.9%, shown in your dashboard. There’s no setup fee and no monthly fee, and nothing is held back from your sales.
Set prices in USD, EUR, GBP, CAD, AUD, INR or SEK. Card providers have minimums, and the smallest is about $2. Settlement is almost always USDC on Polygon, straight to your wallet. To pay your team and your own vendors from a bank account, send USDC to an exchange or off-ramp you use and withdraw it to your bank.
An invoice can pay another of your saved wallets instead of the main one, which helps a company that keeps software revenue and services revenue apart.
Refunds, credits and disputes
A paid invoice has already settled to your wallet, so a refund is something your company sends. To refund a client, send USDC back or agree another arrangement with them, such as a credit line on next month’s invoice. Write your policy on overpayments, credits and the final month of a contract into your terms before the first payment.
If a practice disputes a card payment with its bank instead, the dispute goes to the card provider that charged the card, under that provider’s terms and the card networks’ rules, and nothing comes out of your wallet. A provider may decline future payments from a payer who disputes. An invoice whose lines match the report the practice already has, and an account manager who answers, prevent most disputes.
Running Railbed beside the way clients pay you now
You don’t have to change how every client pays. Nothing about Railbed is exclusive, and billing companies usually add it where their current setup is weakest:
- Clients who pay late. Keep bank transfers for clients who pay on time, and send Railbed invoices with reminders to the ones who don’t.
- Large one-off fees. Take setup, credentialing and implementation fees by invoice in parts, without a volume review on your main account.
- Clients abroad. Offer card payment to practices that would otherwise send an international wire.
- A spare. A company with two ways to be paid keeps getting paid on the day one of them asks for documents.
What stays your company’s responsibility?
Railbed takes payments. It doesn’t submit claims, post remittances, hold patient information or give legal advice. Your business associate agreements, HIPAA compliance, Medicare reassignment and billing agent rules, state rules on billing services and fee-splitting, your contracts and your taxes stay yours, as Railbed’s acceptable use policy says. Nothing on this page is legal or tax advice.
Money other people have rights in stays in the systems built for it. Payer reimbursements, patient payments a practice collects, and anything held in trust follow their own rules, which Railbed doesn’t change. Use Railbed for what practices pay your company, and nothing else.
Railbed compared with how billing companies usually get paid
Billing companies and vendors are usually paid by bank transfer or check, or by a card stored in their billing software and charged on a schedule. They do different jobs:
| Bank transfer or check | A stored card charged monthly | Railbed | |
|---|---|---|---|
| When you’re paid | When the practice sends it | On the schedule, if the card works | When the practice pays, usually minutes later |
| Partial payment | Whatever arrives | Not usually | Part payments, with a smallest first payment |
| Automatic monthly charges | No | Yes | No recurring billing. An invoice each cycle |
| Clients abroad | International wire fees and delays | Depends on the processor | The client’s own card, paid to your wallet |
| A disputed payment | Rare | Comes out of your balance, with a fee | Settled sales can’t be pulled back; disputes go to the provider |
| Where the money goes | Your bank account | Your bank account, after a payout delay | USDC in your own wallet |
When Railbed is not the right fit
Railbed suits a billing company or vendor that invoices practices for its own work and can bill without a stored card. It is the wrong tool in several cases:
- You collect payer or patient money for clients. Railbed takes only your own fees, and it doesn’t pay money on to third parties.
- Your invoices must carry patient detail. Railbed makes no HIPAA compliance claim and isn’t built to hold health information.
- Your plans must renew automatically. Railbed has no recurring billing.
- Your clients will only pay by bank transfer. Railbed is card checkout; practices pay with a card.
- You need payments credited straight to your bank account. Money arrives as USDC that you move to your bank yourself.
Words worth knowing
- Business associate
- Under HIPAA, a company that handles protected health information while doing work for a covered entity, such as billing.
- Business associate agreement
- The contract a covered entity and a business associate sign, with the elements HHS sets in 45 CFR 164.504(e).
- Protected health information
- Health information that identifies a patient, such as a name or member ID together with care or payment details.
- Clearinghouse
- A company that checks, formats and forwards claims between practices and payers, and returns their responses.
- Electronic remittance advice
- The payer’s electronic statement of what it paid on each claim and why, which billing teams post to accounts.
- Reassignment
- Medicare’s rules on who may receive a provider’s payments, which limit what a billing agent may be paid and how.
- Net collections
- What a practice actually collects after denials, adjustments and write-offs. Percentage billing fees are often based on it.
- Revenue cycle management
- The work from a patient’s first appointment to the final payment: eligibility, coding, claims, posting and follow-up.
- USDC
- A digital dollar issued by Circle and redeemable one for one for US dollars. Railbed settles payments in it.
Questions
Can a medical billing company invoice its clients through Railbed?
Yes. Send each practice an invoice with lines for the month’s work, a due date and your terms. The practice pays by card, and the payment settles as USDC to your wallet, with nothing held back.
Can I collect patient payments for the practices I bill for?
No. Railbed collects only your own company’s fees and doesn’t pay money on to third parties. A practice that wants to take its patients’ payments by card opens its own Railbed account with its own wallet, and it can add you to its team if it wants your help.
Is Railbed a business associate?
Railbed makes no HIPAA compliance claim and isn’t built to hold health information. Keep patient data out of your invoices entirely, so Railbed never receives any. Whether your own arrangements meet HIPAA is a question for your privacy counsel.
What can I put on an invoice?
The period, the service, the measure, the rate, the total and your terms. Leave out patient names, dates of service, member IDs, claim numbers and diagnoses, and put the number of your detailed report in the invoice’s reference field instead.
Can I charge a percentage of collections?
Railbed takes whatever amount your invoice states. The fee basis is between you, your client and the rules: the OIG has long warned that percentage arrangements can raise the risk of upcoding, and Medicare limits what an agent that receives payment may be paid. Ask your health care lawyer.
Can practices pay in instalments?
Yes, on an invoice with part payments turned on. Set a smallest first payment, and the practice pays the rest when it can before the due date. Each part settles to your wallet as it’s paid, and reminders run around the due date.
Can I sell software subscriptions?
Not as automatic monthly charges. Railbed has no recurring billing, so sell a year up front, a year in parts on one invoice, or send an invoice each cycle. A pricing table shows your tiers, and each choice is one payment.
Can my account managers send invoices?
Yes. Give them the Sales role: each makes, sends and changes only their own invoices and sees only those. Owners and managers can see every invoice by owner, with what’s been paid and what’s still due.
What will the practice see on its card statement?
The card provider’s name, not your company’s. Tell clients in the invoice note, so their bookkeeper doesn’t query a name they don’t recognise.
Can Railbed freeze or hold my money?
No. Each payment settles to a wallet you control, so there’s no balance to freeze, and nothing is held back from your sales. Railbed can stop new payments only when the law requires it.
What happens if a practice disputes a payment?
The dispute goes to the card provider that charged the card, under its terms and the card networks’ rules. Settled sales can’t be pulled back from your wallet. Clear invoice lines that match your report prevent most disputes.
Can my company be based outside the US?
Yes. Practices pay by card in the currency you set, and the payment settles as USDC to your wallet wherever you are. You move it to your bank through an exchange or off-ramp. Whether you may serve a client in a given country, and how you report the income, stays yours to check.
Do practices need crypto to pay?
No. The practice pays with an ordinary card on a card provider’s page. Only your company receives USDC.
How fast are fees paid?
Usually within minutes of the practice paying, as USDC in your wallet on Polygon. There’s no payout schedule.
Sources
- American Medical Association, Change Healthcare cyberattack, surveys of April 2024, checked 20 November 2026.
- U.S. Department of Health and Human Services, Change Healthcare cybersecurity incident: frequently asked questions, updated after 31 July 2025, checked 20 November 2026.
- Medical Billers and Coders, How much does medical billing cost, 2026, checked 20 November 2026.
- MGMA, Financial management, checked 20 November 2026.
- U.S. Department of Health and Human Services, Business associates, content last reviewed 21 October 2026, checked 20 November 2026.
- Legal Information Institute, 42 CFR 424.73, prohibition of assignment of claims by providers, checked 20 November 2026.
- HHS Office of Inspector General, Compliance program guidance for third-party medical billing companies, December 1998, checked 20 November 2026.
- Federal Register, Modifications to the HIPAA Privacy, Security, Enforcement, and Breach Notification Rules, 25 January 2013, checked 20 November 2026.
- Federal Register, HIPAA Security Rule to strengthen the cybersecurity of electronic protected health information, proposed rule, 6 January 2025, checked 20 November 2026.
- HIPAA Journal, HIPAA updates and HIPAA changes, checked 20 November 2026.
- Federal Register, HIPAA Privacy Rule: changes to support coordinated care and individual engagement and reduce regulatory burdens, 19 November 2026, checked 20 November 2026.
Last updated .
PaidOctober billing service, settled to your wallet$1,640.00
The claims go out.
Your fee comes in.
Set up in under a minute. Your first payment can settle today.
- Nothing held back
- No setup fee
- Settled sales stay yours
Moving a lot of volume? Talk to our team