Bill lockouts and installs by card, with the price in writing first.

A locksmith gets paid in a driveway at midnight, and an alarm or smart home installer gets paid for a day’s work and a box of equipment, often after a sale made in the customer’s home. Scam stories make customers wary and processors watch in-home sales. Railbed bills each job on an invoice, charges the customer’s card through a licensed card provider and settles it to a wallet you control.

  • Installs and lockouts
  • No setup fee
  • Settled sales stay yours

Press the card to run an example sale.

Settles to
Your own wallet, as USDC on Polygon
Chargebacks
Settled sales can’t be pulled back. Card disputes go to the provider
To start
An email, your website and a payout wallet. No setup fee, no monthly fee
Buyer ID checks
Providers decide. Smart Routing picks the one least likely to ask

How can a locksmith or alarm installer take card payments without a card reader?

A locksmith or installer can send the job as an invoice through Railbed, or show its QR code on site. The customer pays on their own phone by card through a licensed card provider, and the money settles to the business’s own wallet, usually within minutes, with nothing held back. Railbed has no recurring billing, so alarm monitoring stays with whoever bills it now, and it is online checkout, not a card terminal.

Why locksmith and alarm payments go wrong

Security work asks a customer to trust a stranger with the one thing that keeps strangers out. A locksmith opens a door the customer can’t, an alarm dealer learns where the sensors are, and a smart home installer sets up the cameras and the app that unlocks the front door. The money changes hands at the same moment, usually on the doorstep, and the trade’s worst actors have taught customers to be suspicious of exactly that moment.

Scammers will often use high-pressure tactics and demand cash.

Connecticut Department of Consumer Protection
Consumer alert on locksmith scams, 16 July 2026

Connecticut’s Department of Consumer Protection put the locksmith problem plainly in a consumer alert in July 2026: a low price on the phone, then a claim on arrival that the job is “more complicated than anticipated”, and a higher bill. “Scammers will often use high-pressure tactics and demand cash.” Alarm dealers carry a different weight, the reputation of door-to-door selling.

An honest security business meets the fallout at the point of payment in a few ways

  • A customer who doubts the price after the work is done, and takes the doubt to their card issuer.
  • A sale made in the customer’s home that federal rules let them cancel for three business days, after the card has already been charged.
  • A processor whose rules list in-home selling among practices it treats as unfair or deceptive.
  • An equipment package worth hundreds of dollars charged before the install day, which a risk team sees as goods not yet delivered.

The third point is not a guess. Stripe’s prohibited and restricted businesses list, last updated 22 September 2026, includes “Door-to-door sales” and “Telemarketing” under its heading for unfair, deceptive or abusive acts or practices. A locksmith who works from calls and a storefront may never meet that line. An alarm dealer whose sales team knocks on doors can find that the way it sells is the problem, whatever it sells.

How Railbed works for locksmiths and installers

Railbed is card checkout you send as an invoice or share as a checkout page. The customer pays on their own phone or computer by card through a licensed card provider, and the money settles as USDC on Polygon to a wallet you control, usually within minutes. Railbed never holds it.

What goes wrong todayWith Railbed
A price dispute after the job, with a fee and a ratioSettled sales can’t be pulled back from your wallet; card disputes go to the provider that charged the card
Equipment deposits held back until the installNothing is held back from your sales
An application that asks how you sell, then questions about door-to-doorNo underwriting and no application to pass. Sign up with an email, your website and a payout wallet
A verbal quote the customer remembers differentlyAn invoice with each line and your terms, sent before the work starts
A card reader with a flat battery at 2 a.m.The customer pays the invoice’s QR code on their own phone

Two limits matter for this trade. Railbed has no recurring billing, so it can’t bill monthly monitoring or a cloud video plan. And it is online checkout, not a card terminal: a customer who wants to tap a card at the counter needs your terminal.

Locks, alarms and the rules, year by year

  1. 30 May 2008

    The FTC urges consumers to use caution when hiring a locksmith, warning that some advertised as local are not.

  2. 31 May 2017

    Texas settles with a national alarm company over door-to-door sales by salespeople not registered with the state.

  3. 1 Sep 2019

    Texas’s revised private security law takes effect, with individual licences for alarm installers and locksmiths.

  4. 28 Jan 2025

    New York secures $450,000 from sellers of home security cameras whose videos were not kept private.

  5. 8 Jul 2025

    A federal appeals court vacates the FTC’s amended rule on subscriptions and cancellation.

  6. 3 Sep 2025

    Parks Associates finds 44% of smart home device owners have used a professional installer.

  7. 13 Apr 2026

    The FCC names a new lead administrator for its voluntary security label for connected devices.

  8. 16 Jul 2026

    Connecticut warns of scammers posing as locksmiths and overcharging for emergency unlocks.

  9. 27 Aug 2026

    Parks Associates finds 53% of smart home device owners pay no subscription fees at all.

The lockout at midnight: the price first, then the work

The FTC warned in 2008 that some locksmiths advertising as local may not be local at all, and the pattern hasn’t gone away. Connecticut’s 2026 alert describes call centres behind several local-looking numbers, paid search placements and fake reviews, and tells customers to “Ask for full estimate upfront” and, before the work begins, to “ask for a written quote.” It also notes that in Connecticut each person doing locksmith work must be registered with the department and pass a criminal history check, and that 293 individuals were registered there at the time.

An honest locksmith can turn that advice into the way they get paid. When the customer calls, quote the service call, the unlock and the likely extras. On arrival, before touching the lock, send that quote as an invoice to the customer’s phone: each line, the total, your business name and your terms. If the job really does turn out harder, because the lock is high-security or has to be drilled, change the invoice and let the customer see the new figure before you start. The customer pays when the door is open, on the same invoice, and gets a receipt.

That sequence is the opposite of the scam the regulators describe. The price is written before the work, it changes only with the customer watching, and the customer pays by card, which leaves them with their bank’s protections instead of a cash demand. A customer who has seen the price in writing is far less likely to dispute it later.

The federal Cooling-Off Rule doesn’t usually reach the lockout itself. The FTC says the rule doesn’t cover sales “needed to meet an emergency”, or work done because the customer asked the seller to visit their home to repair or maintain their property. But it adds that things bought beyond that request are covered, so a new smart lock sold on top of a lockout may carry the three-day right to cancel described below.

Sales in the customer’s home: three days to cancel

Alarm systems, cameras and smart home packages are often sold at the kitchen table, and the FTC’s Cooling-Off Rule applies to many of those sales. It gives the customer until midnight of the third business day to cancel certain sales made at their home, workplace or dormitory, or at a seller’s temporary location, and it applies when the customer invited the salesperson in. It doesn’t cover home sales under $25, sales under $130 at temporary locations, sales finished at the seller’s permanent place of business, or sales made entirely online, by mail or by phone.

The seller’s duties are specific. At the time of the sale the customer must be told of the right to cancel and given two copies of a cancellation form and a dated contract or receipt in the language of the sales presentation. If the customer cancels, the seller has 10 days to refund all their money and return any trade-in. States can add more; Texas’s attorney general reminds customers that Texans have the right to cancel a sale within three business days, and that door-to-door alarm salespeople there must be registered with the state and carry its ID.

For payments, the simplest course is to let the cancellation window close before the big charge. Send the deposit invoice small, or set the equipment invoice’s due date after the third business day, with the cancellation form and your terms attached to the sale as the rule requires. An invoice can be paid in parts, with a smallest first payment as the deposit and the rest on install day. If a customer cancels in time, refund what they paid: Railbed can’t reverse a settled payment, so you send the USDC back or agree another arrangement with them, inside the 10 days the rule allows.

Railbed doesn’t know whether a given sale falls under the rule and doesn’t check your paperwork. None of this is legal advice: whether the rule or a state law applies to how you sell is for you and your own adviser.

Licences: who may sell, fit and open locks

Several states license this work, and the licence often covers the sale as well as the install. Texas is a clear example. Its private security chapter says a person acts as an alarm systems company if the person “sells, installs, services, monitors, or responds to an alarm system or detection device,” and requires individual licences for alarm installers, alarm monitors and locksmiths, among others. The Department of Public Safety’s Class B security contractor company licence covers alarm, electronic access and locksmith work, among others. Connecticut registers each person who does locksmith work, as above.

Railbed asks for no licence and checks none. Which licences you need, in which state, and for which of your staff, is yours to settle. The customer, though, may well ask: the Texas attorney general tells customers to ask for identification, and Connecticut’s alert tells them to refuse service from a locksmith who can’t provide a registration number. Putting your licence number in your invoice terms answers the question before it’s asked.

Monitoring is a subscription, and Railbed doesn’t bill it

Much of the security trade’s revenue is monthly: professional monitoring, cloud video storage and maintenance plans. Parks Associates found in August 2026 that 37% of smart home device owners pay for a home security system service, 19% pay for a video device service, and 53% pay no subscription fees at all for their smart home devices.

Railbed has no recurring billing, and it can’t charge a card each month for monitoring. If you sell monitoring yourself, keep billing it where you do now. If you are a dealer whose monitoring is billed by a central station or a national provider, nothing changes. Railbed fits the one-time part of the job: the equipment, the installation, the service call, the rekey, the move of a system to a new house.

That also keeps Railbed out of the rules that govern subscriptions. The FTC’s amended rule on subscriptions and cancellation, often called click-to-cancel, was vacated by the Eighth Circuit on 8 July 2025, but state automatic renewal laws still apply where they do. Those are questions for whoever bills your monitoring contracts.

Cameras, data and what you leave behind

Smart home installers hand over more than hardware. They set up the accounts, the passwords and the apps that control the cameras and the locks, and the security of those accounts is part of the job. In January 2025 New York’s attorney general secured $450,000 from companies selling home security cameras after finding that a live video stream could be reached by anyone with its address, without signing in. The FCC’s voluntary label for connected devices, the U.S. Cyber Trust Mark, got a new lead administrator in April 2026, and devices carrying it may become a selling point.

Railbed collects nothing about the devices you install. The checkout asks a customer for an email and any details you turn on, such as a service address and a phone number, and the record of the sale is yours. Keep the customer’s account details out of invoice lines and terms, and hand the account over to the customer, not to your own email address, when the job is done.

What a locksmith or installer sells through Railbed

Each of these can be billed today, by invoice or on a checkout page:

  • Lockouts and emergency calls. The service call and the unlock, at a front door or a car door, quoted in writing on arrival and paid when the door is open. Roadside crews bill car lockouts much the same way.
  • Rekeys and lock changes. A rekey for a new homeowner or a landlord’s turnover, priced per cylinder on one invoice.
  • Smart locks and video doorbells. The device and its install, the example on this page, often sold as a fixed-price package from a checkout page.
  • Alarm and camera systems. Equipment and installation on one invoice, paid in parts with a deposit if you want one.
  • Access control and safes. Commercial door controllers, often wired beside an electrician’s work, key fobs, safe openings and servicing, each a one-off invoice with a due date up to two years out.
  • Moves and upgrades. Moving an alarm system to a new house, or replacing an old panel, quoted and billed as a job.

Prices go in USD, EUR, GBP, CAD, AUD, INR or SEK. Card providers have minimums, the smallest about $2, and around $10 or more gives customers the widest choice. An invoice total can be up to 100,000.00, which covers a commercial access control job.

How a job is paid

Take a smart deadbolt sold and fitted on one visit. The lock, the fitting, setting up the owner’s codes and app, and taking away the old cylinder come to $389.00 on one invoice, sent to the customer’s phone before the old lock comes out.

  1. You quote the job, then send the quote as an invoice with your terms, by email or as a link or QR code the customer scans on site.

  2. The customer opens it on their phone and pays, in full or in parts if you allowed it. Smart Routing picks the card provider most likely to approve them.

  3. The customer pays on the provider’s page. The provider decides whether to ask for identity details such as a name, date of birth or address, and Smart Routing tries the providers least likely to ask first.

  4. The provider buys USDC with the card payment and it’s forwarded to your wallet on Polygon. Railbed checks the amount and the wallet before it marks the invoice paid.

  5. The customer gets a receipt, you get an alert in Telegram or Slack if you’ve connected one, and the van moves on to the next call.

Try the whole flow in Test mode first. Payments are simulated and no card is charged.

Before your first job on Railbed

  • Set up a wallet you control. Payments settle as USDC on Polygon to a wallet only you hold the keys to, added when you sign up.

  • Write your terms. Service call fee, after-hours rates, what happens if a lock must be drilled, cancellation, and your licence number.

  • Plan in-home sales. If you sell in customers’ homes, keep the cancellation form and time large charges after the three-day window.

  • Set up your fixed-price jobs. Put a rekey, a smart lock install or a doorbell install on a checkout page with its price.

  • Run a test job. Send an invoice in Test mode, pay it on your phone, and watch the receipt and the alert arrive.

  • Plan how money reaches the bank. Pick the exchange or off-ramp you’ll use to turn USDC into dollars for stock and wages.

Running Railbed beside your card reader and processor

Many locksmiths and installers keep a card reader in the van and a merchant account for monitoring, and both are worth keeping. Railbed sits beside them where they’re weakest:

  • Written prices on site. Send the quote as an invoice on arrival, so the price the customer agreed to is the price they pay.
  • Equipment and installs. Take deposits and install balances through Railbed so they settle to your wallet, usually in minutes, and aren’t held against the install date.
  • The spare. If your processor asks questions about how you sell, or holds funds after a run of disputes, a second way to take cards keeps jobs paid.

Use the same job number in both, so your dispatch system never needs to know which checkout took the money.

Refunds, cancellations and disputes

A paid invoice has settled to your wallet, so a refund is something you send, not something a processor takes from you. When a customer cancels inside the cooling-off window, returns an unopened camera or settles a complaint with you, send the USDC back or agree another arrangement with them.

A dispute goes to the card provider that charged the card, under that provider’s terms and the card networks’ rules, and settled sales can’t be pulled back from your wallet. At a conventional processor the same dispute counts against you: Visa’s monitoring programme adds a merchant’s fraud reports and disputes together and divides them by its settled transactions, and since 1 April 2026 it treats a ratio of 1.5% as excessive, with $8 for each disputed or fraudulent transaction for merchants in the programme. There’s no chargeback fee and no chargeback ratio with Railbed.

None of that makes a fair refund optional, and the Cooling-Off Rule’s refund duties apply however the customer paid. A locksmith’s reviews are what bring the next call.

What stays your responsibility

Railbed’s acceptable use policy holds only the limits the law puts on Railbed itself. Everything about the work stays yours: state licences and registrations for you and your staff, the Cooling-Off Rule and state rules on in-home sales, alarm permits where your city requires them, the security of the accounts you set up, monitoring contracts and their renewal terms, and the prices you quote. Your business, your laws. Railbed doesn’t check them for you.

Fees and getting paid

Railbed shows every fee before anyone pays, and all of them come out of the USDC that arrives. The card provider takes its own fee and exchange spread, shown to the customer on its page. Then come a 1% network fee and the Railbed fee, from 0.9%, shown in your dashboard and locked when the customer starts paying. There’s no setup fee, no monthly fee and no chargeback fee.

The customer pays the price on the invoice, so build card costs into your rates rather than adding a surcharge. Suppliers and wages want dollars: send USDC from your wallet to any exchange or off-ramp you use and withdraw it there.

Railbed compared with a card reader and merchant account

A card reader and merchant accountRailbed
On siteTap or insert the card on your readerThe customer pays an invoice or QR code on their own phone
Written priceA separate quote, if anyone writes oneThe invoice is the quote, line by line
In-home salesMay fall under a processor’s door-to-door rulesNo underwriting and no application to pass
Price disputesReversed from your account, with a fee and a ratioSettled sales can’t be pulled back from your wallet; card disputes go to the provider that charged the card
MonitoringCharged monthlyNo recurring billing; keep monitoring where it is billed now
Money arrivesIn your bank account, after settlementAs USDC in your wallet, usually within minutes

When Railbed is not the right fit

Railbed suits a locksmith or installer who wants jobs and equipment paid by card without a reserve. It’s the wrong tool in a few cases:

  • Most of your revenue is monitoring. Monthly monitoring needs recurring billing, which Railbed doesn’t have.
  • You sell over the counter. A shop customer buying a padlock or a key copy wants to tap a card. Railbed is online checkout, not a terminal.
  • Your jobs are tiny. A single key copy under the card providers’ minimum, about $2, is better taken in cash or on your reader.
  • You never want to hold USDC. Payments settle as USDC to your wallet. Moving it to a bank is a few steps through an exchange, and it’s a step you take yourself.
  • You want your processor to vouch for you. Railbed doesn’t license, register or vouch for anyone. Your licence and your reviews do that.

Words worth knowing

Cooling-Off Rule
The FTC rule giving customers three business days to cancel many sales made in their home or at a temporary location.
Pin tumbler
The common lock mechanism in which spring-loaded pins must line up at the shear line before the plug turns.
Rekey
Changing the pins in a lock so a new key works and old keys don’t, without replacing the lock.
Bait and switch
Quoting a low price to win the job, then raising it once the worker is on site.
Alarm systems company
In Texas, a business that sells, installs, services, monitors or responds to alarm systems, and needs a licence.
Professional monitoring
A paid service in which a central station watches an alarm and calls for help when it trips.
Cyber Trust Mark
The FCC’s voluntary security label for connected consumer devices.
Electronic access control
Card, fob or keypad systems that control who can open a door, often licensed with alarm work.

Questions

Can a locksmith take card payments without a card reader?

Yes. Send the job as an invoice, or show its QR code, and the customer pays on their own phone by card through a licensed card provider. The money settles as USDC to your wallet, usually within minutes.

Can I send the quote before I start the job?

Yes, and it’s the best use of an invoice in this trade. Send the quote as an invoice on arrival, change it with the customer watching if the job turns out harder, and they pay the same invoice when the work is done.

Does the three-day cancellation rule apply to my installs?

It can. The FTC’s Cooling-Off Rule covers many sales of $25 or more made in the customer’s home, but not emergencies or repairs the customer called you for. Extras sold beyond that call may be covered. Ask your adviser how it applies to the way you sell.

Can Railbed bill monthly alarm monitoring?

No. Railbed has no recurring billing. Keep monitoring where it’s billed now, and use Railbed for equipment, installs and service calls.

Will Railbed ask about door-to-door sales?

No. There’s no underwriting and no application to pass: you sign up with an email, your website and a payout wallet. How you sell, and the rules on in-home sales and registration where you sell, stay your responsibility.

What happens if a customer disputes the charge?

Their bank raises it with the card provider that charged the card, and settled sales can’t be pulled back from your wallet. There’s no chargeback fee and no chargeback ratio. A written invoice the customer saw before the work is the best answer to a price complaint.

Can I take a deposit on an alarm or camera system?

Yes. Send a deposit invoice, or one invoice paid in parts with a smallest first payment as the deposit. For a sale made in the customer’s home, consider timing the larger payment after the three-day cancellation window.

Will customers be asked for ID when they pay?

The card provider decides. Smart Routing sends each customer to the providers least likely to ask for ID. Light checks, such as a name, date of birth and address, can still happen.

Do my customers need crypto or a crypto wallet?

No. They pay by card on the provider’s page, like any online payment. Only your side settles in USDC.

Can I sell a fixed-price smart lock install online?

Yes. Put it on a checkout page with its price and the details you need, such as the service address, and share the page’s address or QR code on your website or a flyer. The customer books and pays in one go.

Can my technicians send invoices without seeing the whole account?

Yes. Railbed’s Sales role lets a person create and send invoices and see only their own, so each technician can bill their jobs from the van.

Can customers tip the technician?

Yes. An invoice can offer 10%, 15% or 20%, or an amount the customer types, and the tip settles with the payment. A tip left for an employee is theirs under federal wage law, so pass it on through payroll.

How fast do I get the money?

Usually within minutes of the customer paying, as USDC in your wallet on Polygon.

How do I get the money into my bank?

Send USDC from your wallet to an exchange or off-ramp you use and withdraw it to your bank account. The move money to your bank guide walks through it.

Sources

PaidA smart deadbolt, installed, settled to your wallet$389.00

Lock fitted, invoice paid.
Settled to your own wallet.

Set up in under a minute. Your first payment can settle today.

  • Installs and lockouts
  • No setup fee
  • Settled sales stay yours

Moving a lot of volume? Talk to our team