Take card payments for tap fees, deposits and bills at your utility.

Card fees climb with every bill, members resent convenience fees, and impostors tell customers to pay in crypto. Railbed lets a co-op or private utility invoice each customer for a tap fee, a deposit or a bill they pay by card, and settles each payment to a wallet the utility controls.

  • Nothing added at checkout
  • Nothing held back
  • No setup fee

Press the card to run an example sale.

Settles to
Your own wallet, as USDC on Polygon
Chargebacks
Settled sales can’t be pulled back. Card disputes go to the provider
To start
An email, your website and a payout wallet. No setup fee, no monthly fee
Buyer ID checks
Providers decide. Smart Routing picks the one least likely to ask

Can a small water utility take credit card payments online?

Many can. A water supply corporation, electric co-op or private utility can send each customer an invoice for a tap fee, a deposit or a bill and let them pay by card, and Railbed settles each payment to a wallet the utility controls. It has no autopay or budget billing, and a city or district utility should check its state’s public funds rules first, because government finance officers advise against accepting cryptocurrency.

Where a utility’s card payments go wrong

A utility bills everyone it serves, every month, for something nobody can do without. Most of its customers now want to pay by card, and every card payment costs the utility a fee that grows with the bill. For the small systems that make up most of the trade, that fee comes out of rates set by a board or a commission, not out of a margin.

Currently DVEC absorbs the fees charged to the cooperative for membership use of credit and debit cards to pay bills.

Duncan Valley Electric Cooperative
DVEC

Duncan Valley Electric Cooperative in Arizona told its members why it was making a change to card payments: “Currently DVEC absorbs the fees charged to the cooperative for membership use of credit and debit cards to pay bills.” The amount had been growing fast, the co-op wrote, and its board decided to move card payments to an outside processor with a convenience fee of $6.75 per card payment and a cap of $250 per transaction. Every co-op board meets the same choice sooner or later: absorb the fees in everyone’s rates, or charge the members who pay by card.

The card networks offer utilities a cheaper rate, with rules attached. Visa and Mastercard each run a utility programme for merchants coded as utilities (MCC 4900), with a flat interchange rate per payment that one bill-pay provider, PayGov, puts at $0.75 for both credit and debit. To qualify under Visa’s programme, a utility must register, accept Visa in every channel where it takes cards, and “Not charge fees of any type to cardholders for processing Visa transactions”, a rule that reaches the utility’s outside processor too. Visa doesn’t count heating oil or propane as a utility at all. Since 18 October 2025, Visa has also let MCC 4900 utilities use its service fee programme, which allows flat, tiered or percentage fees on card payments, as ACI Worldwide explains.

Then there are the impostors. Scammers call and text customers claiming to be the utility, threaten a shutoff and demand payment by Bitcoin, prepaid card or payment app. The FTC’s consumer alert is blunt: “no utility company will demand payment in cryptocurrency.” Utilities United Against Scams, a group of more than 150 utilities in the US and Canada, lists a threat to disconnect service immediately, a request for immediate payment and a request to buy a prepaid debit card among the common signs of a scam on its home page. Any utility thinking about a new way to take payments has to fit it around that message.

So a utility weighs more than the fee before it changes how customers pay.

What a utility weighs before it takes a card

  • The fee. Absorbed in everyone’s rates, or charged to card payers as a convenience or service fee, under the networks’ rules.
  • The programme. The utility rate’s conditions, from registration to accepting cards in every channel to charging cardholders nothing.
  • The scams. Customers taught to distrust any unusual payment request, and rightly so.
  • The money rules. Tariffs, deposit rules and, for public utilities, the laws on where public money may be held.

Who Railbed fits, and who should stop here

Railbed settles each payment as USDC, a dollar stablecoin, to a wallet the utility controls. That is the first thing to check, before any fee or feature, because for many utilities it decides the question.

A city, county or district utility is a government. The Government Finance Officers Association advises governments “to abstain from accepting cryptocurrency for receivables, using cryptocurrency for payables, and investing in these products”. Its reasons include that such products are “typically unauthorized by state laws as an allowable investment vehicle for governments” and that cryptocurrency “cannot be processed through normal banking operations”. A public utility answers to its state’s public funds and depository laws, its auditors and its council or board, and most of those laws send its receipts to the treasurer or a qualified bank, which a wallet holding USDC is not. The government offices and agencies page sets out how those laws read. If yours has authority and a plan for USDC, that is a decision for its lawyers and auditors, not for a checkout.

Utilities that aren’t governments decide for themselves:

  • Member-owned co-ops. Electric co-ops and water co-ops are private businesses owned by their members, with boards that set their own payment policies. In Texas, for example, nonprofit water supply and sewer service corporations operate under Water Code chapter 67.
  • Private water and sewer companies. Investor-owned systems, often small, under their state commission’s rules and their own tariff.
  • Submetering and utility billing firms. Companies that bill tenants for water, sewer or energy on behalf of property owners.
  • Campgrounds, marinas and communities with their own systems. RV parks billing metered electric, HOA-run water systems, private sewer plants.

Even where the board can decide, start small. One-time charges such as tap fees, transfer fees and reconnection fees are the natural first use, and monthly bills come after, if at all.

How Railbed works for a utility

Railbed is card checkout that never holds the utility’s money. The utility sends a customer an invoice, the customer pays it by card on a normal checkout, and the payment settles as USDC straight to a wallet the utility controls, usually minutes after they pay.

What goes wrong todayWith Railbed
Card fees absorbed in everyone’s rates, or charged to card payersThe customer pays the amount on the invoice. Fees come out of what arrives, and nothing is added at checkout
A bill-pay contract with monthly and per-payment feesNo setup fee and no monthly fee. Sign up with an email, your website and a payout wallet
Large one-time charges that customers can’t pay at onceInvoices that can be paid in parts, with a smallest first payment
Reconnection payments that wait for office hoursAn invoice paid at any hour, with an alert to the on-call phone on Telegram or Slack
A processor’s reserve or review on an unusual monthNo cap on monthly sales, and nothing is held back from your sales

An independent, licensed card provider charges the customer’s card and buys USDC with it, and the USDC is forwarded to the Polygon wallet the utility saved in Railbed. Railbed checks that the right amount reached the right wallet before it marks the invoice paid.

What Railbed doesn’t do matters as much here. It has no autopay, no budget billing, no card terminal for the office counter and no way to pay out capital credits or refunds to a list of members. It is a way for customers to pay what they owe by card, one invoice at a time.

Utility payments, year by year

Utilities have taken cards for decades. What changed recently is what the networks allow utilities to charge, and how often scammers pretend to be the utility.

  1. 20 May 1936

    The Rural Electrification Act lets the federal government lend to farmers who band together in nonprofit co-ops to bring electricity to rural America.

  2. Apr 2005

    Visa introduces a utility interchange rate for MCC 4900 merchants. Mastercard follows in October 2006.

  3. 4 Mar 2022

    The Government Finance Officers Association advises governments to abstain from accepting cryptocurrency for receivables.

  4. 11 Aug 2022

    The FTC warns that scammers posing as utilities send QR codes to scan at Bitcoin ATMs, and that only scammers demand utility payments in cryptocurrency.

  5. 18 Oct 2025

    Visa includes MCC 4900 utilities in its service fee programme, allowing flat, tiered or percentage fees on card payments.

  6. 9 Sep 2026

    NRECA’s fact sheet counts 830 distribution co-ops and 60 generation and transmission co-ops serving 42 million people.

  7. 18 Nov 2026

    Utility Scam Awareness Day runs under the theme “Think Before You Scan”. UUAS has helped take more than 14,830 toll-free numbers used by scammers out of operation.

The record pulls two ways. The networks have made card payments cheaper and more flexible for utilities that follow their programmes, and the scams have made customers wary of anything that mentions crypto. Railbed sits in the middle of that: customers pay by card, never in crypto, and the utility is the only one who handles USDC.

The rules a utility answers to

A utility’s prices and practices are set in its tariff, approved by its board or its state commission, and none of that changes with a new way to pay. Before taking a payment through Railbed, check that your tariff and policies allow it, and what they say about fees for paying by card.

Deposits are regulated money. In Texas, the Public Utility Commission’s rule for water and sewer utilities, 16 TAC 24.159, caps a residential deposit at $50 for water and $50 for sewer when an applicant hasn’t established credit. It requires interest at the rate the commission sets each year, a receipt for every deposit, records of each depositor and transaction, and a refund with interest after 18 consecutive billings paid on time or when service ends, by payment or credit to the customer’s bill. Unclaimed deposits must be tracked for at least seven years. A deposit taken by card through Railbed is still a deposit under those rules: you record it, receipt it, pay the interest and refund it as the rule says.

Disconnection has rules too. The FTC reminds consumers that before a real utility shuts off service, it notifies them in writing and offers a repayment plan, and state rules add notice periods, protections in extreme weather and medical certifications. Taking a reconnection payment by card doesn’t change any of them.

None of this is legal advice. Your state commission’s rules, your tariff and your own lawyer decide what applies to your system.

What a utility bills, and what fits

Utilities bill more kinds of charges than their customers see, and some fit Railbed far better than others.

Railbed invoices carry up to 50 lines, a reference such as the account number, a note and your terms, and they can be created from your billing system through the Invoices API, with webhooks telling it when each one is paid.

How a payment works

  1. A family building a house applies for a new water tap. The water supply corporation creates an invoice with the membership fee, the tap fee and the meter on separate lines, the service address and account number in the reference, and its tariff’s terms at the foot.

  2. The family gets an email from the corporation’s name with the invoice and its PDF, opens it and chooses Pay. Railbed’s checkout asks for an email, and Smart Routing picks the card provider most likely to approve their card.

  3. They pay on the provider’s page, in a new tab. The provider decides whether to ask for identity details, and Smart Routing tries the providers least likely to ask first.

  4. The provider buys USDC with the card payment and it’s forwarded to the corporation’s wallet on Polygon. Railbed checks the amount and the wallet, marks the invoice paid and emails the family a receipt.

  5. The office schedules the crew to set the meter, and records the payment in its billing system against the account.

Try the whole flow in Test mode first. Test invoices never email your customer, and no card is charged.

Monthly bills without autopay

Most utility customers who pay by card want it done for them. Railbed can’t do that: it has no recurring billing and keeps no card on file, so every monthly bill is an invoice the customer opens and pays. For some customers that’s fine, and for many it isn’t.

The numbers matter for a utility too. A business can send 200 invoice emails a day through Railbed, which suits a small system or a group of customers who chose card payment, not every account a large co-op serves. A utility billing thousands of meters keeps its own billing and bill-pay system for routine bills.

Where monthly invoices do fit, set them up so they work without chasing:

  • A due date on every bill. It matches the due date on your paper bill, so the two never disagree.
  • Reminders that match your notice rules. Reminders can go 3 days before, on the day, and 3 and 7 days after, and stop once the bill is paid. They don’t replace the written notices your rules require before a disconnection.
  • The account number as the reference. Railbed’s invoice list searches by reference and exports to CSV, so posting payments to your billing system is a matter of matching numbers.
  • Part payments where your policy allows them. A customer on a payment arrangement can pay part of a bill today and the rest later, and the invoice shows what’s still due.

Card fees, honestly

If your utility already takes cards at the networks’ utility rate, Railbed will rarely be cheaper. A flat interchange fee of under a dollar on a $150 bill is a fraction of Railbed’s fees: the card provider’s own fee and exchange spread, a 1% network fee and the Railbed fee from 0.9%. Railbed’s case is elsewhere.

One more thing for large charges. When a customer pays through Railbed, the card provider charges the card and uses the payment to buy USDC, and to the card networks that is a purchase of cryptocurrency. Visa’s merchant data standards manual says “Purchases of cryptocurrency must use MCC 6012 or 6051”. Some issuers bill such a purchase as a cash advance, with its own fee and a lower limit, and some cards decline it. Tell customers before a large tap fee or line extension, and let them pay part another way if they prefer.

Scam season: how customers know it’s really you

The customers a utility most wants to protect are the ones scammers target: older members, people behind on a bill, anyone frightened of a shutoff. The theme of this year’s Utility Scam Awareness Day, on 18 November 2026, was “Think Before You Scan”, and Monica Martinez of Utilities United Against Scams put it simply: “Whether it’s a fake payment portal or a misleading notice, our message is simple: think before you scan.”

Taking payments through Railbed has to fit that message, not blur it:

  • Customers pay by card, never in crypto. Leave Settings → Crypto payments off, so no invoice or checkout ever shows customers a way to pay from a crypto wallet. Your customers never need to know the word USDC.
  • Payments start from you. Every invoice arrives by email from your utility’s name, or from a page your own website or your own paper bill points to. Tell customers you never send payment requests by text, and never demand immediate payment by phone.
  • Tell customers the address to expect. Railbed’s checkout opens on Railbed’s own address, and the card is paid on the card provider’s page. Say so in a bill insert and on your website, so a customer knows what a real payment looks like.
  • A way to check. Give customers your office number to call before they pay anything they weren’t expecting, and keep the old ways to pay open.

A utility that adds card payments through Railbed should say so to its members in plain words, the same way it tells them how to spot a scam.

Before your first utility invoice

There’s no application to fill in. These are the checks worth making first.

  • Authority to hold USDC. Your board’s approval, and for anything owned or controlled by a government, a clear answer from your lawyers and auditors on public funds rules.

  • Your tariff and fee policy. Check that your tariff allows card payments this way and decide, with your board, whether you absorb the fees.

  • A payout wallet and who controls it. Save the Polygon wallet payments settle to, held by the utility, with only owners able to change it.

  • Crypto payments off. Leave Settings → Crypto payments off so customers only ever see card payment.

  • A notice to customers. Tell members how you take payments and what a real invoice looks like before the first one arrives.

  • Deposit records. Decide how card-paid deposits are recorded, receipted, credited with interest and refunded under your rules.

  • A run in Test mode. Send a test invoice to yourself and pay it in Test mode before you send a Live one.

Running Railbed beside your billing system

Keep your billing system, your bank and any bill-pay vendor you use. Railbed is one more way to pay, not a replacement for the systems that read meters, calculate bills and track accounts.

Refunds, credits and disputes

A paid invoice has settled to the utility’s wallet, so a refund is something you send, not something a processor takes back. For an overpayment, credit the customer’s account, send the USDC back or agree another arrangement with them. Deposits are refunded as your deposit rules require.

A card dispute goes to the provider that charged the card, under its terms and the card networks’ rules, and nothing comes out of the utility’s wallet. Settled payments can’t be pulled back from it. A customer who disputes a bill they owe still owes it under your tariff, and your normal collection and disconnection rules still apply.

What stays your responsibility

Railbed’s acceptable use policy holds only the limits the law puts on Railbed itself. Your tariff, your rates, deposits and their interest, disconnection notices and protections, assistance programmes, capital credits, public funds rules, taxes and your records all stay with you. Railbed records what a customer types at checkout; it doesn’t read meters, calculate bills or decide who owes what.

Fees and getting paid

Railbed shows every fee before anyone pays, and all of them come out of the USDC that arrives. The card provider takes its own fee and exchange spread, shown to the customer on its page. Then come a 1% network fee and the Railbed fee, from 0.9%, shown in your dashboard and locked when the customer starts paying. There’s no setup fee, no monthly fee and no chargeback fee.

Payments usually settle within minutes of the customer paying. To pay suppliers, your power provider or your payroll from a bank account, send USDC from the utility’s wallet to an exchange or off-ramp you use and withdraw it there.

Railbed compared with a utility bill-pay processor

Bill-pay processor at the utility rateRailbed
Cost per paymentA flat interchange fee of under a dollar on qualifying payments, plus the processor’s feesThe card provider’s fee, a 1% network fee and the Railbed fee from 0.9%
Fee to the customerNone under the utility rate’s conditions, or a convenience or service feeNone added at checkout
Autopay and budget billingUsually includedNot available
To startA contract, registration in the programme and setupAn email, your website and a payout wallet
Money arrivesDollars in your bank, in a day or twoUSDC in your wallet, usually within minutes
Public utilitiesBuilt for themUsually not a fit, under public funds rules

When Railbed is not the right fit

Railbed suits a co-op or private utility that wants an easy way to take card payments for some of its charges. It is the wrong tool in several cases, and it is better to know them first:

  • You are a public utility. City, county and district utilities answer to public funds laws, and government finance officers advise against accepting cryptocurrency. Check before anything else, and expect the answer to be no.
  • You need autopay or budget billing. Railbed has no recurring billing and no card on file.
  • Your customers pay at the counter. Railbed is online checkout, not a card terminal or a payment kiosk.
  • You bill thousands of accounts by email. A business can send 200 invoice emails a day, so routine bills for a large system stay on your billing system.
  • You already pay the utility rate. Your current processor will cost less on routine bills.
  • You never want to hold USDC. Payments settle as USDC to your wallet. Moving it to a bank is a few steps through an exchange, and it is a step you take yourself.

Words worth knowing

The terms a utility meets in its tariff, a card programme’s rules or a scam warning.

Tariff
The approved schedule of a utility’s rates, fees and rules of service.
Tap fee
The charge for connecting a new service to the water or sewer system, usually covering the meter, materials and labour.
Membership fee
What a member-owned co-op or water supply corporation charges to join, often paid with the tap fee.
Line extension
Building service out to a new customer, with the customer paying a share under the utility’s policy.
Customer deposit
Money a utility holds against unpaid bills, under its commission’s rules on amount, interest and refund.
MCC 4900
The merchant category code for electric, gas, water and sanitation utilities. Visa doesn’t include heating oil or propane in it.
Utility interchange rate
A flat interchange fee per card payment for utilities registered in Visa’s or Mastercard’s programme.
Convenience fee
A flat fee for paying through a channel other than the usual one, such as online instead of in person.
Service fee
A fee Visa allows certain merchants, including utilities since October 2025, to charge for card payments under its programme.
Capital credits
A co-op’s margins allocated back to its members, and later paid out to them.

Questions

Can a municipal utility use Railbed?

Usually not. A city, county or district utility answers to public funds laws, and the Government Finance Officers Association advises governments to abstain from accepting cryptocurrency for receivables. Ask your lawyers and auditors before anything else.

Can an electric or water co-op use Railbed?

A member-owned co-op decides its own payment policies, so it can, if its board approves holding USDC and its tariff allows it. Start with one-time charges such as tap fees and reconnections.

Do customers have to pay in crypto?

No. Customers pay with the card they already have, on a normal checkout. The conversion to USDC happens after they pay, and only the utility needs a wallet. Keep Settings → Crypto payments off and customers never see a crypto option.

Does Railbed charge customers a convenience fee?

No. The customer pays the amount on the invoice, and all of Railbed’s fees come out of what arrives. Whether to set a card fee in your tariff is your board’s decision.

Can customers set up autopay?

No. Railbed has no recurring billing and keeps no card on file, so each bill is an invoice the customer pays. Keep your current system for autopay and budget billing.

Is Railbed cheaper than the utility interchange rate?

No, not for routine bills. A utility that qualifies for the networks’ utility rate pays a flat fee of under a dollar per payment through its processor. Railbed’s fees are the card provider’s fee and spread, a 1% network fee and the Railbed fee from 0.9%.

Can we take a deposit by card through Railbed?

If your deposit rules and tariff allow card payment, yes. The deposit is still regulated money: record it, give a receipt, pay the interest your commission sets and refund it as your rules require.

Can customers pay a reconnection fee at night?

Yes. Send the invoice, and the customer can pay it at any hour. Connect Telegram or Slack so whoever is on call sees the payment the moment it settles.

How do customers know a Railbed invoice isn’t a scam?

Tell them before the first one arrives. Invoices come by email from your utility’s name, never by text, and the checkout opens on Railbed’s address with the card paid on the provider’s page. Give them your office number to check anything unexpected.

Will customers be asked for ID when they pay?

The card provider decides. Smart Routing sends each payment to the providers least likely to ask, and many payments go through with no check. Some providers ask for light details such as a name, date of birth and address, especially on larger amounts.

Can Railbed freeze the utility’s money?

No. Railbed never holds a merchant’s money: each payment settles to a wallet the utility controls. Railbed can stop new payments only when the law requires it, for money laundering, sanctions or child abuse material.

Can we pay out capital credits or refunds through Railbed?

No. Railbed collects payments; it has no payouts to members. Refund an overpayment as a bill credit, by sending USDC back or another way you agree with the customer.

How large a charge can a customer pay?

An invoice can total up to 100,000.00, and card providers set their own minimums, the smallest about $2. Split a larger line extension across invoices, and warn customers that some cards bill these payments as cash advances.

How does the utility get the money into its bank?

Send the USDC from the utility’s wallet to an exchange or off-ramp that serves your country, sell it for dollars and withdraw to your bank. The guide to moving money to your bank walks through it.

Sources

PaidA new water tap, settled to your wallet$1,450.00

Tap fees and bills by card.
Paid to your own wallet.

Set up in under a minute. Your first payment can settle today.

  • Nothing added at checkout
  • Nothing held back
  • No setup fee

Moving a lot of volume? Talk to our team