Take the deposit by card, and ship when the balance is paid.

Custom work is paid for before it’s made, and a processor can read a deposit on a six-week job as risk. Business buyers want terms, fake purchase orders arrive looking like real ones, and a card fee on a large invoice is real money. Railbed lets customers pay your deposits and invoices by card, in full or in parts, and settles each payment to a wallet you control.

  • Deposit, then balance
  • PO number on invoices
  • No chargeback fee

Press the card to run an example sale.

Settles to
Your own wallet, as USDC on Polygon
Chargebacks
Settled sales can’t be pulled back. Card disputes go to the provider
To start
An email, your website and a payout wallet. No setup fee, no monthly fee
Buyer ID checks
Providers decide. Smart Routing picks the one least likely to ask

How can a manufacturer take a card deposit on a custom order?

A manufacturer can send a customer a Railbed invoice with lines, tax, a PO number and terms, set the deposit as the smallest first payment and take the balance before shipping. The customer pays by card, in full or in parts, and each payment settles to a wallet the manufacturer controls, usually within minutes. There’s no application to pass and nothing is held back. Card disputes go to the provider that charged the card. Some company cards block crypto purchase codes, so bank transfer stays the route for those buyers.

Where a manufacturer’s card payments go wrong

Most manufacturers are small. Of the 239,265 manufacturing firms in the US in 2022, all but 4,177 had fewer than 500 employees, and about three-quarters had fewer than 20, according to the National Association of Manufacturers. A job shop like that makes parts to someone else’s drawing, for a customer who may be a company it has worked with for years or a stranger who found it online last week. It buys the material, programs the machines and runs the job before the parts exist to ship, and the way it gets paid has to cover that gap.

They request that the shipments be made on a 30-day credit

FBI
Purchase order scam leaves a trail of victims

A deposit is money taken before delivery. Card processors publish that as a reason to hold money back. Square’s reserves FAQ says: “If you are collecting payment in advance of delivering the purchased goods or services, we may place a reserve on your account until Square has a better understanding of your customer chargeback and refund rate.” The same page says disputes are more common “for custom-made products, such as furniture”. Stripe’s reserves FAQ lists “The business belongs to an industry with longer-than-average delivery windows”, and Shopify’s reserves page treats “custom orders, and pre-orders” as higher risk, with an example of how “$1000.00 USD might be reserved for 120 days”. A shop quoting six weeks of lead time is exactly what those lines describe.

One big order looks like a spike. A shop that takes a few thousand dollars a month by card and then lands a $30,000 production run has just done the thing Stripe’s FAQ calls “an unexplainable sharp increase in processing volume”. Square’s page says inconsistency in “transaction sizes or methods, or how many payments you’re taking within a given period” can lead to a reserve “until a more consistent pattern is reestablished”. The order that should pay for the year’s new machine is the one most likely to be held.

Business buyers want terms, and terms make you the lender. Atradius found that “43% of credit-based B2B sales are overdue” in the US. Checks are still a quarter of B2B payments made, the Association for Financial Professionals reports: 26% in 2025, down from 33% in 2022. A shop that ships on net 30 and is paid by check in 50 days has financed its customer’s inventory for seven weeks.

And some purchase orders are fake. The FBI described the pattern in 2014, and it hasn’t gone away: fraudsters pose as real companies and universities and ask a vendor for a quote. “They request that the shipments be made on a 30-day credit”, the FBI wrote, and because the institution they’re impersonating often has good credit, vendors usually agree. The goods go to a warehouse or a storage unit and are gone before the first invoice is due.

What a small manufacturer runs into when a customer pays by card or on terms

  • Reserves on deposits. Money taken before a long lead time is one of the reasons processors publish for holding part of your sales back.
  • Holds on the big order. A production run several times your usual month looks like a spike to a risk model.
  • Waiting on net terms. Shipped parts, an invoice and a check that arrives weeks after the due date.
  • Orders that were never real. A purchase order on net terms from someone posing as a real buyer, shipped to an address that isn’t theirs.

How Railbed works for a manufacturer

Railbed lets a customer pay your deposit and your invoice by card and never holds your money. Each payment settles as USDC straight to a wallet you control, usually minutes after the customer pays. A deposit taken on Monday buys Monday’s bar stock, not money a risk team releases once the job has shipped and the dispute window has closed.

What goes wrong todayWith Railbed
A reserve on deposits for custom workNothing is held back from your sales. Each payment settles to your wallet as it’s made
A hold when one order is ten times your usual monthNo cap on monthly sales, and no balance with Railbed for anyone to freeze
Net 30 that becomes net 50, paid by checkAn invoice the customer pays by card, with the balance due before you ship
A purchase order from someone posing as a real buyerYou ship once the money has settled, not on a promise to pay in 30 days
Deposit and balance tracked in a spreadsheetOne invoice paid in parts, with a smallest first payment, reminders and a receipt for each part
Each chargeback costs a fee and counts against youSettled sales can’t be pulled back from your wallet. Card disputes go to the provider that charged the card

An independent, licensed card provider charges the customer’s card and buys USDC with it, and the USDC is forwarded to the Polygon wallet you saved in Railbed. Railbed checks that the right amount reached the right wallet before it marks the payment received, and can tell you on Telegram or Slack the moment it does. Signing up takes an email, your website and a payout wallet. There’s no underwriting and no application to pass.

Deposit, progress payment and balance on one invoice

Most custom work is paid in stages, and a Railbed invoice is built for that. You build it with the lines of the quote (parts, material, setup, tooling, finishing and freight), any discount and sales tax, a due date and your terms. Then you decide how it can be paid.

Two limits shape how you quote. Once the customer starts paying, the lines, tax and part-payment settings are fixed (you can still change the due date, reminders and terms), so a change order becomes a second invoice rather than an edit. And an invoice can total up to 100,000.00, so a production run above that is billed as two or more invoices, by release or by shipment, which many purchasing departments prefer anyway.

If a salesperson quotes and bills, give them the Sales role. They can make, send and change their own invoices and see only those, and every invoice records who created it and who owns it.

Purchase orders, net terms and the order that was never real

Fake orders are aimed at manufacturers and distributors because a credit sale ships before anyone pays. The General Services Administration’s Office of Inspector General describes the current version in a fraud alert. Fraudsters send requests for quotes that look like they came from a federal agency, then a purchase order promising payment “guaranteed within 30 calendar days of the goods having been received (‘Net 30’)”, with delivery to a storage company, a warehouse or a freight forwarder. The goods it lists include “computers and related equipment, printer toner, projectors/cameras, medical and pharmaceutical equipment, and industrial equipment”. Its advice is practical: confirm the buyer by phone using a number you found independently, check the email domain against the agency’s real one, and look up the delivery address before you ship.

The FBI’s account of the same scheme names the same signs: domain names “almost identical” to real businesses and universities, large orders, 30-day credit and a delivery address that “might be a warehouse, self-storage facility, or the residence” of someone recruited to re-ship the goods.

Railbed changes one part of that picture: the order of events. When a new customer pays a deposit and the balance by card before you ship, there is no 30-day promise to break. That doesn’t make every card payment good. A stolen card can still be used, and a dispute can still be raised with the card provider, so the GSA’s checks still apply to a new customer with an unusual delivery address. But a buyer who wanted your parts on credit because they never meant to pay is unlikely to pay you first.

Keep net terms for the customers who have earned them. Many shops run both: established accounts on terms by bank transfer, and new or small customers by deposit and balance through Railbed.

Business cards, card data and the rules that changed

The card rules for business payments shifted under manufacturers in the last two years, and one of them matters for Railbed in particular.

Card data programmes. Visa has long priced business card payments in levels, with the lowest interchange for merchants who send the most transaction data. Under its Commercial Enhanced Data Program, instituted on 17 October 2025, Visa began accepting only real transaction data for its best rates, and Payments Dive reported in December 2025 that “the level two discount” would cease “altogether next April”. A shop that took large business card payments through a processor may have seen its costs change with no change in what it sells.

Surcharges. Some shops pass card fees on to the customer. Visa’s merchant surcharging Q&A caps a surcharge at 3%, and lists states that prohibit surcharging or set their own requirements. With Railbed there’s no surcharge to add: the customer pays the price on the invoice, and the fees come out of what arrives.

Company cards and crypto codes. This is the rule to be plain about. When a customer pays through Railbed, the card provider charges the card and buys the USDC that settles to your wallet. To the card networks, that is a purchase of cryptocurrency, and Visa’s merchant data standards manual says “Purchases of cryptocurrency must use MCC 6012 or 6051”. Many company purchasing card programmes block those codes, and some issuers bill a card purchase of crypto as a cash advance, with its own fee. An owner’s card or a small business card usually works. A purchasing card at a large company may be declined, and a government purchase card should be expected to decline. Tell customers before they pay, and keep bank transfer for the buyers whose cards won’t go through.

Business payments and manufacturing rules, year by year

The rules a manufacturer meets come from two directions: the card networks, which set what a card payment costs, and the agencies that regulate what you make.

  1. 27 Oct 2014

    The FBI describes a purchase order scam in which fraudsters posing as real institutions order goods from vendors on 30-day credit.

  2. 2022

    The US has 239,265 manufacturing firms, all but 4,177 with fewer than 500 employees.

  3. 15 Apr 2023

    Visa caps card surcharges at 3%.

  4. 2025

    Checks fall to 26% of B2B payments made, from 33% in 2022.

  5. 17 Oct 2025

    Visa’s Commercial Enhanced Data Program takes effect, accepting only real data for its best business card rates.

  6. Apr 2026

    Visa’s level two discount on business card payments is due to end altogether.

  7. 1 Apr 2026

    Visa’s dispute monitoring threshold falls to 1.5%, with $8 charged for each disputed or fraudulent transaction in the programme.

  8. 8 Jul 2026

    Importers of most regulated consumer products must file certificates of compliance electronically with US Customs and Border Protection.

The rules that stay with what you make

Railbed takes the payment. What you make, who you may sell it to and what paperwork goes with it are set by other rules entirely. This is the position in the sources linked, as read on 20 November 2026. It isn’t legal advice, and your own adviser is the person to ask how it applies to your products.

What you makeWhat the rule says
Defense articlesAnyone in the business of manufacturing or exporting defense articles must register with the State Department’s Directorate of Defense Trade Controls, and the regulation says manufacturing alone brings the duty, even for a business that doesn’t export. The page for military and defense businesses covers how defense work is paid
Children’s productsDomestic manufacturers and importers must certify in a written Children’s Product Certificate, “based on test results from a third-party, CPSC-accepted laboratory”, that the product meets the children’s product safety rules (CPSC)
Other regulated consumer productsA general certificate of conformity, and the certificate goes to your retailers and distributors. The duty applies when you sell straight to consumers too (CPSC)
Imported regulated consumer productsFrom 8 July 2026, importers must file certificates of compliance electronically with US Customs and Border Protection (CPSC)

None of that changes when the customer pays by card, and Railbed doesn’t check it for you. Railbed’s acceptable use policy holds only the limits the law puts on Railbed itself, money laundering and sanctions among them, and whether you may make and ship a given part to a given buyer stays your job. Your business, your laws.

Built for job shops, fabricators and makers

Most manufacturers use two or three of these, depending on who’s buying.

How a sale works

  1. A customer approves your quote for 250 machined brackets. You send them an invoice with the parts, setup and freight as lines, their PO number in the reference field, and a deposit of $1,875 as the smallest first payment.

  2. They open the invoice in the email, choose Part of it, and pay the $1,875 deposit by card. Smart Routing picks the card provider most likely to approve them, and they pay on the provider’s page, in a new tab.

  3. The provider decides whether to ask for identity details; Smart Routing tries the providers least likely to ask first, and larger payments are more likely to meet a check.

  4. The provider buys USDC with the card payment and it’s forwarded to your wallet on Polygon. Railbed checks the amount and the wallet, sends the customer a receipt showing the balance due, and tells you on Telegram or Slack.

  5. You order the material and run the job. When the parts pass inspection, a reminder goes out for the balance; the customer pays it against the same invoice, and you ship.

Try the whole flow in Test mode first. Payments are simulated and no card is charged, and a Test invoice never emails your customer.

Large orders, ID checks and the 100,000.00 line

Manufacturing invoices are larger than most card payments, and three things follow from that.

The provider may ask for more. Card providers decide whether to check a buyer’s identity, and large payments are more likely to meet a check. Smart Routing sends each buyer to the provider least likely to ask at their amount and location, but a $20,000 payment may still bring a request for a name, a date of birth and an address, or more. Providers also set their own limits, so a very large single payment can be declined where two smaller ones go through. Letting the customer pay in parts helps here too.

The invoice has a ceiling. An invoice can total up to 100,000.00. Split anything larger by release, by shipment or by site.

The card fee is real money at this size. A fee of a few percent on a $40,000 order is a cost worth weighing against what it replaces: weeks of waiting on terms, a reserve on the deposit, or a factoring fee. Many shops offer card payment for deposits, small orders and new customers, and keep bank transfer for large repeat orders from established accounts.

Before your first card deposit

None of this needs an application or a waiting period. It’s the short list worth getting right once.

  • A payout wallet. Save the Polygon wallet your payments should settle to. Use a wallet you hold the keys to, not an exchange deposit address.

  • Deposit and cancellation terms. Write what the deposit covers, what happens if the customer cancels after material is bought, and when the balance is due. Paste them into the invoice terms.

  • Sign-off on the spec. Get the drawing, revision, material, tolerances and quantity approved in writing before the deposit, and keep it with the invoice.

  • Which customers get which route. Decide who pays by card, who gets net terms by bank transfer, and who pays a deposit first, so your team quotes the same way every time.

  • A word about company cards. Tell customers paying with a company purchasing card that it may decline the payment, and give them your bank details as the fallback.

  • Checks for new buyers. Confirm a new customer by phone on a number you found yourself, and look up any delivery address that isn’t their business.

  • Sales roles. Give anyone who quotes the Sales role so their invoices are theirs and recorded as theirs.

  • A run in Test mode. Send yourself a Test invoice with a deposit and pay both parts in Test mode before you send a Live one.

Running Railbed beside your bank and your processor

If you take cards through a processor today, or run everything through bank transfers and checks, keep them. Nothing about Railbed is exclusive. Most shops add it for three jobs:

  • Deposits on custom work. The payments a processor is most likely to hold, settled to your wallet as they arrive.
  • New and small customers. Paid before you ship, instead of opening an account on terms for a stranger.
  • The spare. A shop with two ways to take cards keeps invoicing on the day one of them holds a big payment for review.

Use the same job numbers in both, and put the PO in the reference field, so your books match whichever route the money took.

Refunds, remakes and disputes

Custom work goes wrong in its own ways: a tolerance missed, a finish that doesn’t match, a part made to the wrong revision. The fix is usually a remake or a credit, decided between you and the customer. A paid invoice has settled to your wallet, so a refund is something you send, not something a processor takes from you. Send the USDC back, or agree another arrangement with the customer, such as a credit against the remake or the next order.

A dispute works differently too. The customer’s bank raises it with the card provider that charged the card, under that provider’s terms and the card networks’ rules, and nothing comes out of your wallet. Visa’s dispute management guide describes “not as described” disputes as goods “materially different from what was described, defective, damaged”, and with custom parts the description is the drawing. At a conventional processor the same dispute counts against you: since 1 April 2026 Visa’s monitoring programme treats a ratio of 1.5% as excessive, with $8 for each disputed or fraudulent transaction.

A signed-off spec, inspection records and photos of the parts before they ship settle most arguments before anyone calls a bank, and a card provider may decline future payments from a buyer who disputes.

What stays your responsibility

Everything about the product stays yours: export controls and registration for defense articles, safety testing and certificates for consumer products, sales tax and resale certificates, product liability, and the terms you agree with each customer. Railbed doesn’t check any of it, and it doesn’t decide who you sell to. It takes the card payment and settles it to your wallet.

Fees and getting paid

Railbed shows every fee before anyone pays, and all of them come out of the USDC that arrives. The customer pays the amount on the invoice. The card provider takes its own fee and exchange spread, shown to the customer on its page. Then come a 1% network fee and the Railbed fee, from 0.9%, shown in your dashboard and locked when the customer starts paying. There’s no setup fee, no monthly fee and no chargeback fee.

Set prices in USD, EUR, GBP, CAD, AUD, INR or SEK, which suits a shop quoting a customer abroad in their own currency. Each payment usually settles within minutes, so a deposit paid this morning can pay for this afternoon’s material order. To pay your suppliers, payroll or rent from a bank account, send USDC from your wallet to any exchange or off-ramp you use and withdraw it there. Some suppliers will take USDC directly.

Card providers have minimums, the smallest about $2, which no manufacturing invoice comes near. The limits that matter at your end are the invoice total of 100,000.00 and each provider’s own limit on a single payment.

Railbed compared with how manufacturers are paid now

Bank transfer or check on net termsCard through a processorRailbed
When you’re paid30 days after the invoice, often laterA payout schedule, unless the money is heldUsually within minutes of each payment
Deposits on custom workFine, if the customer will wire before you startMay trigger a reserve until deliverySettled as paid. Nothing is held back
A fake purchase orderYou ship first and find out at day 30Depends on the cardYou ship once the money has settled
CostBank fees, plus the cost of waitingA card fee, and level 2 and 3 data rulesThe card provider’s fee, a 1% network fee and the Railbed fee from 0.9%
DisputesNot a card payment, so nothing for a bank to reverseA fee for each, and thresholds from 1.5%Settled sales can’t be pulled back. Disputes go to the card provider
Company purchasing cardsNot involvedUsually acceptedMay be declined, because the payment buys crypto
Best atEstablished accounts and large repeat ordersShops whose processor is happy with themDeposits, new customers, small and mid-sized orders

When Railbed is not the right fit

Railbed suits a manufacturer that takes deposits, sells to new or smaller customers, or wants card payments without a reserve. It is the wrong tool in a few cases:

  • Your buyers pay with purchasing cards. Large companies’ purchasing cards and government cards often block the codes a crypto purchase uses. Keep bank transfer and your processor for those buyers.
  • Your orders are routinely far above 100,000.00. Splitting the odd large order works; splitting every order doesn’t. Bank transfer suits contract billing at that size.
  • You bill on a schedule. Railbed has no recurring billing. A monthly service or maintenance contract becomes an invoice each month, which the customer pays.
  • You need to pay suppliers or subcontractors through the same tool. Railbed takes payments in. It doesn’t send money out to third parties.
  • You need a card terminal. Railbed is online checkout. A trade counter that swipes cards keeps its terminal.
  • You never want to hold USDC. Payments settle as USDC to your wallet. Moving it to a bank is a few steps through an exchange, and it’s a step you take yourself.

Words worth knowing

The terms a manufacturer meets in a quote, a purchase order or a processor’s reply.

Smallest first payment
The least a customer can pay first on a Railbed invoice that allows parts. Set it to your deposit, and later payments can be any amount a card provider can take, up to what’s left.
Progress payment
A payment made partway through a job, often at first article or at a milestone, before the balance on delivery.
Net 30
Payment terms that give the customer 30 days after the invoice to pay. Fake purchase orders ask for them because the goods ship first.
Purchase order
The buyer’s document authorising a purchase. A Railbed invoice holds its number in the reference field, up to 64 characters.
Level 2 and level 3 data
The extra transaction details, such as tax and line items, that card networks have priced business card payments by. Visa’s level two discount was due to end in April 2026.
CEDP
Visa’s Commercial Enhanced Data Program, in effect since 17 October 2025, which accepts only real transaction data for its best business card rates.
MCC
Merchant category code, the number that tells a card issuer what kind of purchase a payment is. Visa requires 6012 or 6051 for purchases of cryptocurrency.
Children’s Product Certificate
The written certificate, based on third-party lab testing, that a children’s product meets CPSC rules.
ITAR registration
Registration with the State Department’s Directorate of Defense Trade Controls, required of anyone in the business of manufacturing defense articles.
Surcharge
A fee added to a card payment to cover processing costs. Visa caps it at 3%, and some states prohibit it.

Questions

Can a customer pay a deposit by card and the balance later?

Yes. Send an invoice that lets them pay in parts, with your deposit as the smallest first payment. Later payments can be any amount a card provider can take, up to the balance; each settles as it arrives, and the invoice shows what’s left.

Why would Square or Stripe hold a manufacturer’s deposits?

Their reserve pages name the pattern: payment collected before delivery, longer-than-average delivery windows, custom-made products and sudden jumps in volume. Custom manufacturing has all four. Railbed settles each payment to your own wallet, so there’s no balance to hold.

Where does the customer’s PO number go?

In the invoice’s Reference or PO number field, up to 64 characters. It prints on the invoice and its PDF, so accounts payable can match it.

Can I invoice more than 100,000.00?

Not on one invoice. Split a larger order by release, shipment or site. Card providers also set their own limits on a single payment, and large payments are more likely to meet an identity check.

Will my customers’ company cards work?

Often, but not always. A card payment through Railbed buys USDC, which card networks treat as a purchase of cryptocurrency, and some company purchasing card programmes block that. Owner and small business cards usually work. Keep bank transfer for buyers whose cards decline.

Can I add a surcharge for card payments?

There’s nothing to add at checkout: the customer pays the amount on the invoice, and the fees come out of what arrives. If you price card payments differently from bank transfer, check your state’s rules first; Visa caps surcharges at 3% and some states prohibit them.

Does paying first protect me from fake purchase orders?

It removes the part of the scam that depends on 30-day credit, because you ship after the money has settled. It doesn’t stop a stolen card, so still confirm new buyers by phone and look up unusual delivery addresses.

Do my customers need crypto?

No. They pay with the card they already have. The conversion to USDC happens after they pay, and only you need a wallet.

Will customers be asked for ID when they pay?

Sometimes, and the card provider decides. Smart Routing sends each buyer to the provider least likely to ask for ID at their amount and location. Large payments are more likely to meet a check.

What happens if a customer disputes a payment?

The dispute goes to the card provider that charged the card, and a settled payment can’t be pulled back out of your wallet. There’s no chargeback fee for Railbed to pass on.

Can Railbed freeze my money?

No. Every payment settles straight to a wallet you control, so there’s no balance with Railbed to hold. Railbed can stop new payments on an account only when the law requires it, and it can never touch USDC already in your wallet.

Can my sales team send invoices?

Yes. Give them the Sales role and they can make, send and change their own invoices and see only those. Every invoice records who created it and who owns it.

Can I bill a maintenance contract every month?

Not automatically. Railbed has no recurring billing, so send an invoice each month, or bill a quarter or a year in one invoice that can be paid in parts.

How do I get the money into my bank?

Send USDC from your wallet to an exchange or off-ramp you use, sell it for your currency and withdraw to your bank, whenever you choose. The guide shows each step.

Sources

  1. National Association of Manufacturers: Facts about manufacturing, checked 20 November 2026
  2. Atradius: Payment Practices Barometer, US 2025, checked 20 November 2026
  3. Association for Financial Professionals: Benchmarks for financial professionals, 20 key stats, citing the 2025 AFP Digital Payments Survey, checked 20 November 2026
  4. Square: Reserves FAQ, checked 20 November 2026
  5. Stripe: Reserves frequently asked questions, modified 2 November 2026, checked 20 November 2026
  6. Shopify Help Center: Reserves, checked 20 November 2026
  7. GSA Office of Inspector General: Fraud alert, fake government requests for quotes, checked 20 November 2026
  8. FBI: Purchase order scam leaves a trail of victims, 27 October 2014, checked 20 November 2026
  9. Payments Dive: Visa’s new program vexes merchants, Lynne Marek, 9 December 2025, checked 20 November 2026
  10. Visa: Merchant surcharging Q&A, checked 20 November 2026
  11. Visa: Merchant data standards manual, October 2026 edition, checked 20 November 2026
  12. Visa: Dispute Management Guide for Merchants, October 2026, checked 20 November 2026
  13. Merchant Risk Council: Stricter VAMP ratio thresholds are now in effect, 1 April 2026, checked 20 November 2026
  14. eCFR: 22 CFR part 122, registration of manufacturers and exporters, checked 20 November 2026
  15. CPSC: Children’s Product Certificate and CPSC: Certificates FAQ, checked 20 November 2026

Last updated .

PaidDeposit on 250 machined brackets, settled to your wallet$1,875.00

Deposit in, machines running.
Balance paid before it ships.

Set up in under a minute. Your first payment can settle today.

  • Deposit, then balance
  • PO number on invoices
  • No chargeback fee

Moving a lot of volume? Talk to our team