Get paid in the driveway, not five business days later.

Plumbing, electrical and HVAC companies take cards already. The trouble is what comes with them: payouts that wait days, reserves when a run of system replacements looks like a spike, and fees on four-figure tickets. Railbed sends the invoice to the customer’s phone, charges their card through a licensed provider and settles each payment to a wallet you control, usually minutes after they pay.

  • Paid on site
  • No setup fee
  • No cap on monthly sales

Press the card to run an example sale.

Settles to
Your own wallet, as USDC on Polygon
Chargebacks
Settled sales can’t be pulled back. Card disputes go to the provider
To start
An email, your website and a payout wallet. No setup fee, no monthly fee
Buyer ID checks
Providers decide. Smart Routing picks the one least likely to ask

How can a plumber or HVAC technician take a card payment on site without a terminal?

A plumber, electrician or HVAC technician can send the customer an invoice from the job and show its QR code. The customer pays by card on their own phone through a licensed card provider, can add a tip if the business allows it, and gets a receipt by email. Railbed settles each payment to the company’s own wallet, usually minutes later, with nothing held back and no monthly fee.

Where a trade business’s card payments go wrong

Most plumbing, electrical and HVAC companies can get a card account; nobody refuses to let a plumber take a card. The trouble is the terms that come with it. A service company’s money arrives in an awkward shape: dozens of small service calls, then a run of system replacements and water heaters at four figures each, collected by a technician standing in a driveway. That shape is exactly what processors’ risk rules watch for, and every day a payout waits is a day the supply house has already been paid out of your own account.

may not be held while the employer is awaiting reimbursement from the credit card company

U.S. Department of Labor
Fact Sheet #15

The first wait comes at the start. Jobber’s help centre says a new account’s first payment “starts an authorization period”, during which, in the United States and Canada, “each payment you collect during that period has its own payout window of 5 business days”. After the first payout, card payouts take 2 business days, and an instant payout carries “an additional 1% instant payout fee”. Other field service apps run on processors with schedules of their own, and nearly all of them pay out in days, not minutes.

The second risk is the reserve. Square’s reserves FAQ says some businesses’ sales are more prone to chargebacks, “especially true when a buyer may have a different expectation of the product or service than what is delivered, which is more common for home contracting and repair services”. It also lists “Sporadic processing activity” and being new to Square among its reasons for holding back part of a seller’s sales. Stripe’s reserves FAQ names an account that “shows an unexplainable sharp increase in processing volume”. Summer is when air conditioners fail and winter is when furnaces and pipes do, so a heat wave alone can triple an HVAC company’s card volume in a fortnight.

The third is disputes. A homeowner who called at midnight with water coming through the ceiling agrees to a price in a hurry and sometimes regrets it by morning. A customer whose new system still doesn’t cool the upstairs disputes the charge rather than calling back. Visa’s monitoring programme has treated a combined fraud and dispute ratio of 1.5% as excessive since 1 April 2026, down from 2.2%, and merchants in the programme pay a fee for each disputed transaction.

Then there are the technicians. A tip left on a card belongs to the technician, and the Department of Labor’s Fact Sheet #15 says the amount due “must be paid no later than the regular pay day and may not be held while the employer is awaiting reimbursement from the credit card company”. A slow payout doesn’t move that deadline.

These are the published rules a service company’s card payments run into

  • A new account’s wait. Jobber’s first payments each wait 5 business days for payout, and later payouts take 2, with instant payout costing an extra 1%.
  • Reserves on repair work. Square’s reserves FAQ names home contracting and repair services among the trades where disputes are more common, and sporadic processing among its reasons for a reserve.
  • Seasonal spikes. Stripe lists an “unexplainable sharp increase in processing volume” among the reasons it may place a reserve, and a trade’s busy season looks like one.
  • Dispute ratios. Visa treats a 1.5% fraud and dispute ratio as excessive since 1 April 2026, which a handful of regretted emergency calls can reach on a small account.
  • Surcharge rules. Passing card fees to customers is banned in some states and regulated in others, and Visa caps it at 3% where allowed.
  • Tips on time. Federal law says a technician’s card tips are due by the regular payday, whether or not the processor has paid out.

How Railbed works for plumbing, electrical and HVAC

Railbed is card checkout for service companies that never holds your money. A technician or the office sends the customer an invoice, the customer pays with the card they already have on their own phone, and the payment settles as USDC to a wallet you control, usually minutes after they pay. There’s no underwriting and no application to pass, and there’s no balance with Railbed for a risk team to hold back during your busy season.

What goes wrong todayWith Railbed
A new account’s payouts wait 5 business daysEach payment settles to your own wallet, usually minutes after it’s paid
A heat wave’s jobs read as a volume spikeNo cap on monthly sales
A reserve on repair and replacement workNothing is held back from your sales
A terminal or a card reader for every truckThe customer pays on their own phone, from a link or a QR code
An application and a wait before the first jobNo underwriting and no application to pass. Sign up with an email, your website and a payout wallet
Each disputed call costs a fee and counts toward a ratioSettled sales can’t be pulled back from your wallet. Disputes go to the card provider that charged the card

An independent, licensed card provider charges the customer’s card and buys USDC with it, and the USDC is forwarded to the Polygon wallet you saved in Railbed. Railbed checks that the right amount reached the right wallet before it marks the invoice paid, and an alert can tell your dispatcher in Telegram or Slack.

Card fees, surcharges and the price on the invoice

A 3% card fee on a $45 drain cleaning is small change. On a $12,000 heat pump replacement it is $360, which is why so many service companies ask for a check on big jobs or add a card fee to the invoice. Adding that fee is a surcharge, and surcharges have rules of their own.

Visa’s merchant surcharging Q&A records the state of play as Visa understood it on 15 February 2024:

Surcharges banned4
Connecticut, Maine, Massachusetts, Oklahoma. Visa
Surcharges allowed with state rules4
Colorado, Minnesota, New Jersey, New York. Visa
Everywhere else43
None of the rules above.

Visa’s list also names Puerto Rico among the places that prohibit surcharging, and where surcharges are allowed Visa caps them at the lower of your card acceptance cost or 3%. State laws change: Connecticut’s ban was amended in 2024 and still prohibits surcharges, and the card fee settlement awaiting a federal judge’s final approval would give merchants new rights to surcharge some cards. Check the current rule in your state with your adviser before you add a card fee anywhere.

Railbed works differently. It adds nothing on top of your price: the customer pays the price on the invoice, and every fee comes out of the USDC that arrives. If you want card payers to cover the cost, that is still a surcharge or a cash discount, and the same state laws decide whether and how you can do it. Many companies find it simpler to set one price for every way to pay.

The rules that shape a service call

The law that matters most to a trade business is licensing, codes and permits, and that is between you, your state and your inspector. A few rules reach into how you get paid, and they are worth knowing before the first card payment.

Emergency calls and the right to cancel. The FTC’s Cooling-Off Rule gives a buyer three days to cancel many sales made at their home, with the money back within 10 days. The FTC says it doesn’t cover sales “made because you asked the seller to visit your home to repair or perform maintenance on your personal property”. For an emergency, the regulation leaves out a sale the buyer started, where the work is “needed to meet a bona fide immediate personal emergency of the buyer”, and the buyer gives the seller “a separate dated and signed personal statement in the buyer’s handwriting” describing the emergency and waiving the right to cancel. Whether a burst pipe or a dead furnace in a house fits those words, and what your state adds, is a question for your adviser.

Tips belong to the technician. The Department of Labor’s Fact Sheet #15 says: “Regardless of whether an employer takes a tip credit, the FLSA prohibits employers from keeping any portion of employees’ tips for any purpose, whether directly or through a tip pool.” Owners with at least a 20 percent stake who actively manage the business count as managers who may not keep employees’ tips, though a manager may keep tips “that they receive directly from a customer for the service they directly and solely provide”.

Refrigerants. Since 1 January 2025, new residential and light commercial air conditioning and heat pump systems may not be installed with refrigerants above a global warming potential of 700, under the EPA’s Technology Transitions rule. A final rule effective 27 July 2026 removed the deadline for installing systems made or imported before 2025. Installing new R-410A equipment made or imported after that date stays prohibited, the EPA’s notice says, and the industry is “already providing equipment using R-32 or R-454B”.

Tax credits. The IRS says the energy efficient home improvement credit, which many customers asked about when they bought a heat pump or a new water heater, “will not be allowed for any property placed in service after December 31, 2025”, under the law signed on 4 July 2025. A customer asking for an itemised invoice for a 2026 install may still want it for their records, but not for that credit. Your adviser can say what state or utility programmes remain where you work.

Refrigerants, tax credits and card rules, year by year

  1. 1 Jan 2023

    The energy efficient home improvement credit starts applying to qualifying property placed in service from this date.

  2. 26 Dec 2023

    The EPA gives installers of residential and light commercial split systems one more year, to 1 January 2026, for equipment made or imported before 2025.

  3. 15 Feb 2024

    Visa’s surcharging Q&A records five places that prohibit surcharges and four with their own requirements.

  4. 1 Jan 2025

    New home AC and heat pump systems with refrigerants above a global warming potential of 700 can no longer be installed, except older stock.

  5. 4 Jul 2025

    A new federal law ends the home improvement credit for property placed in service after 31 December 2025.

  6. 1 Apr 2026

    Visa’s monitoring programme starts treating a 1.5% fraud and dispute ratio as excessive, down from 2.2%.

  7. 9 Jun 2026

    A federal judge gives preliminary approval to Visa and Mastercard’s card fee settlement with merchants, including new surcharge rights.

  8. 27 Jul 2026

    The EPA’s final rule takes effect, removing the deadline for installing split systems made or imported before 2025.

  9. 16 Nov 2026

    The court hears the request for final approval of the card fee settlement. As of 20 November 2026, no ruling has been published.

What a trade business bills, and how each is paid

A service company’s work comes in a few shapes, and each has a natural home in Railbed. Most are invoices; fixed prices you publish can also be a checkout page.

What you billHow it’s paid through RailbedWhat to watch
A service call or diagnostic feeA one-line invoice on the day, or a checkout page at a fixed priceCard providers’ minimums: about $2 at the least, $10 or more for the widest choice
A repair priced on the spotAn invoice from the job with the parts and labour as lines, paid on the customer’s phoneAgree the price before the work, in writing
A replacement or installationA deposit invoice when the customer says yes, the balance when the system runsA deposit cap, where your state’s home improvement law sets one
An after-hours emergencyAn invoice with the emergency rate on its own lineThe right to cancel and the emergency rules above
A yearly maintenance planOne invoice a year for the plan, with its visits in the termsRailbed has no recurring billing, so the customer pays each year
A home warranty service feeThe homeowner’s own fee on a one-line invoiceWhat the warranty company pays you stays under its contract

The businesses that bill this way are many:

  • Plumbers. Drain calls, leak repairs, water heaters and repiping, from a $150 call to a whole-house job.
  • Electricians. Panel upgrades, circuits, lighting and generator hook-ups, quoted on site and paid at the end of the day. Solar and battery installs run on months-long timelines and stage payments of their own.
  • Heating and air conditioning. Tune-ups, repairs and system replacements, with the busiest weeks in the hottest and coldest ones.
  • Water heater and water treatment specialists. Fixed-price installs that suit a checkout page with a set price per model.
  • Drain and sewer contractors. Camera inspections and line repairs, priced by the job and paid when the line runs clear.
  • Appliance and garage door technicians. Short visits with a diagnostic fee and a parts-and-labour repair.

How a sale works

  1. A customer’s 40-gallon water heater fails. Your technician quotes a replacement, installed, at $1,850.00, and the customer agrees.

  2. When the new heater is in, the technician opens the Railbed dashboard on their phone and creates an invoice: “A water heater, installed”, $1,850.00, with tips allowed and your warranty in the terms.

  3. The customer scans the invoice’s QR code on the technician’s screen, or opens the email Railbed sends in your business’s name, and chooses Pay. They can add a tip for the technician. Smart Routing picks the card provider most likely to approve them.

  4. They pay on the provider’s page, in a new tab. The provider decides whether to ask for identity details, and Smart Routing tries the providers least likely to ask first.

  5. The provider buys USDC with the card payment and it’s forwarded to your wallet on Polygon. Railbed checks the amount and the wallet before it marks the invoice paid, emails the customer a receipt with the tip shown apart, and alerts your office in Telegram or Slack.

  6. The technician sees the invoice marked paid and leaves for the next call.

Try the whole flow in Test mode first. Payments are simulated, no card is charged, and a Test invoice never emails your customer.

Taking payment on site without a terminal

Railbed is online checkout, not a card reader. That turns out to suit a trade that works in other people’s houses: the customer already has the card and the phone, and the technician only needs a way to show them the bill.

From the technician’s phone. Give technicians the Sales role. They can make, send and change their own invoices and see only those, which keeps one technician’s customers out of another’s list. Create offers them invoices only.

By QR code or email. The Send it card on each invoice shows a QR code and a link. The customer scans it in the kitchen and pays on their own phone, so no card leaves their hand and no card number touches your technician’s device. Or Railbed emails the invoice with its PDF from your business’s name, and replies go to the technician who sent it.

Fixed prices on a page. If you publish prices, such as a diagnostic fee, a tune-up or a standard water heater install, put them on a checkout page and share it by QR code. A checkout page can ask for the service address and a phone number before the customer pays.

The office sees it too. Each payment can alert a Telegram chat or a Slack channel as it lands, so dispatch knows the job is paid before the van leaves. Owners and managers see each person’s invoices, what they total and what’s unpaid under By owner on the Invoices page.

Card providers’ minimums. Each card provider has a minimum, the smallest about $2, and $10 or more gives customers the widest choice of providers. Every real service call clears that.

Tips for the technician

Customers tip technicians, especially after a midnight call or a crawlspace job, and an invoice can make room for it. Turn on Let them add a tip and the customer is offered 10, 15 or 20 percent, or an amount of their own. The tip is shown apart on the customer’s page, the receipt and in your dashboard, and it never counts toward what the invoice is owed.

The tip arrives in your wallet with the payment, and from there it is the technician’s money. Pay it to them through payroll by the regular payday, as federal law requires, and keep a record of each technician’s tips. Railbed’s dashboard shows each tip apart, which makes that record easy, but paying it out is yours to do. If you’d rather your customers didn’t tip, leave tips off; it is a setting on each invoice.

System replacements and big tickets

A failed furnace in January or a dead compressor in August turns into the largest payment a homeowner makes to a trade business: a full system, often several thousand dollars, sometimes more. The refrigerant transition has made those jobs heavier. Systems on R-32 or R-454B replace R-410A for new installs, and since the EPA’s 2026 rule an installer may still put in R-410A equipment that was made or imported before 2025, from stock.

Railbed handles a replacement as two or three invoices. A deposit when the customer says yes, so you can order the equipment, and the balance when the system is running and the customer has seen it work. If your state’s home improvement law caps a deposit, that cap applies to a card deposit too, and California’s is $1,000 or 10 percent of the price, whichever is less. The contractors and remodelers page sets out the state rules in more detail.

An invoice can total up to 100,000.00, far beyond any residential system. Card providers set their own limits and decide when to check a buyer’s identity, and large payments are more likely to need a check, so a customer paying a five-figure replacement by card may be asked for a name, date of birth and address. Splitting a job into invoices to stay under a reporting line is structuring, and it is not what part payments are for.

What Railbed doesn’t do is finance. A customer who needs to spread a new system over five years needs a lender, and many service companies already work with one. Railbed can still take the deposit, or the balance a customer chooses to put on a card.

Home warranty and insurance work

Plenty of service calls are paid by someone other than the homeowner. A home warranty company sends you the job, pays you under its contractor agreement, and the homeowner pays a service fee their warranty contract sets. An insurer pays for a covered loss, such as a burst pipe’s water damage, by its own check or transfer, often to the homeowner and their mortgage lender together.

That money stays outside Railbed. What the warranty company or the insurer pays you is governed by your agreement with them and by their process, and Railbed doesn’t stand in for either. The homeowner’s own share is different: the warranty service fee, the part of a repair the warranty doesn’t cover, or an upgrade the customer chooses can all go on an invoice and be paid by card like any other job. Keep them on separate invoices from anything you bill the warranty company, so nobody pays twice for the same work.

Before your first service invoice

  • A payout wallet. Save the Polygon wallet your payments should settle to. Use a wallet you hold the keys to, not an exchange deposit address.

  • Technicians’ access. Invite each technician and give them the Sales role, so they send and see only their own invoices.

  • Your tip rule. Decide whether customers can tip, and how tips reach technicians through payroll by the regular payday.

  • One price for every way to pay. Check your state’s surcharge law before you add any card fee, or keep one price whatever the customer uses.

  • Terms on every invoice. Put your warranty, your callback policy and your payment terms in the invoice’s terms, which print at its foot.

  • Alerts for the office. Connect Telegram or Slack, so dispatch sees each payment as it lands.

  • A run in Test mode. Send yourself a Test invoice from a phone and pay it in Test mode before your technicians use it.

Running Railbed beside the processor you have

Most service companies already take cards through a field service app, an invoicing tool or a reader in each truck. Keep it. Nothing about Railbed is exclusive, and the usual first step is to add it as a second way to pay. It earns its keep in a few places:

  • For the big tickets. Send replacements, installs and their deposits through Railbed, where nothing is held back and the money usually reaches your wallet in minutes, and keep small calls where they are.
  • During the busy season. When a heat wave or a cold snap doubles your volume, a second checkout means a risk team’s review of one account doesn’t stop you collecting.
  • For the declined card. A customer turned away by one fraud screen is often approved by a different card provider, on the same visit.
  • As the spare. If one processor holds a payout or closes the account after a dispute, technicians can keep collecting on site.

Use the same job or work order number as the invoice reference in both, so your books show which payment belongs to which job.

Refunds, callbacks and disputes

A paid invoice has settled to your wallet, so a refund is something you send, not something a processor takes from you. If a part is returned, a job is cancelled or a customer overpaid, send the USDC back or agree another arrangement with them.

Callbacks are the trade’s own form of dispute. A drain that blocks again or a system that short-cycles brings an angry customer, and how quickly you go back decides whether they call you or their bank. If they call their bank, it raises the dispute with the card provider that charged the card, under that provider’s terms and the card networks’ rules, and nothing comes out of your wallet. At a conventional processor the same dispute counts against you: Visa’s monitoring programme treats a combined fraud and dispute ratio of 1.5% as excessive, and merchants in it pay $8 for each disputed or fraudulent transaction.

Keep the paper anyway. Visa’s dispute management guide warns that “Statements like ‘the item is as described’ are not sufficient without documentation”. A signed estimate, before-and-after photos and the invoice itself, with its lines and terms, are what answer a customer’s question before it becomes a dispute.

What stays your responsibility

Railbed’s acceptable use policy holds only the limits the law puts on Railbed itself. Your business, your laws: running a licensed trade inside the law stays your job, and Railbed doesn’t check it for you. That covers your licences and permits, code compliance and inspections, refrigerant handling under the EPA’s rules, the price you quote and any surcharge you add, the right to cancel and the refunds it requires, paying technicians their tips and wages on time, and sales tax on parts and equipment where your state charges it.

Money that belongs to someone else under a contract, such as a warranty company’s or an insurer’s payment, keeps the rules of that contract. Railbed can stop new payments only when the law requires it, and it never holds money that has reached your wallet.

Fees and getting paid

Railbed shows every fee before anyone pays, and all of them come out of the USDC that arrives. The customer pays the price on the invoice, plus any tip they add. The card provider takes its own fee and exchange spread, shown to the customer on its page. Then come a 1% network fee and the Railbed fee, from 0.9%, shown in your dashboard and locked when the customer starts paying. There’s no setup fee, no monthly fee, no per-truck fee and no chargeback fee.

Set prices in USD, EUR, GBP, CAD, AUD, INR or SEK. To pay the supply house, your technicians or your payroll provider from a bank account, send USDC from your wallet to any exchange or off-ramp you use and withdraw it there. Some suppliers will take USDC directly.

There’s no cap on monthly sales, so a record week in a heat wave settles like any other. Card providers set their own limits on a single payment and are more likely to check identity on large ones.

Refunds are your call. Railbed can’t reverse a settled payment, so for a returned part or a cancelled job, refund the customer yourself in a way you both agree.

Railbed compared with a field service app’s payments

A field service app’s card paymentsA card reader in each truckRailbed
Getting startedAn application and the processor’s checksA reader for each technician and an account behind themAn email, your website and a payout wallet
When the money is yoursDays. Jobber’s first payments wait 5 business days, then 2Usually days, on the processor’s scheduleUsually minutes after the customer pays
ReservePossible on repair work and volume spikesPossible on repair work and volume spikesNothing is held back from your sales
How the customer paysA link or the technician’s deviceTheir card in your readerTheir card on their own phone, from a link or QR code
DisputesA fee and a count toward the networks’ ratiosA fee and a count toward the networks’ ratiosSettled sales can’t be pulled back. Disputes go to the card provider
Money arrives asDollars in your bankDollars in your bankUSDC in your wallet, which you move to your bank

When Railbed is not the right fit

Railbed suits a service company that bills from the job and wants card payments that settle in minutes without a reserve. It is the wrong tool in a few cases, and it is better to know them first:

  • You need a card reader. Railbed is online checkout. A customer who wants to tap a card on a reader in the van needs a terminal; with Railbed they pay on their own phone.
  • You bill maintenance plans monthly. Railbed has no recurring billing. Sell the plan for a year on one invoice, or keep monthly plans on the processor that charges them.
  • Your customers need financing. Railbed doesn’t lend or spread payments over months. Keep your financing partner for customers who need one.
  • Your work is paid by warranty companies or insurers. Their payments follow their contracts and stay outside Railbed. Only the homeowner’s own share fits here.
  • You never want to hold USDC. Payments settle as USDC to your wallet. Moving it to a bank is a few steps through an exchange, and it is a step you take yourself.

Words worth knowing

Service call fee
A set charge for coming out and diagnosing a problem, often credited toward the repair. It suits a one-line invoice or a checkout page.
Flat-rate pricing
Pricing each task from a book of set prices rather than by the hour. Each task can be a line on an invoice.
Surcharge
An extra charge for paying by card. Some states ban it, others set rules, and Visa caps it at 3% where allowed.
Callback
A return visit to fix a job that didn’t hold. A quick callback is the best way to keep a dispute from reaching a bank.
Maintenance agreement
A plan of yearly tune-ups sold in advance. Without recurring billing, sell it as one invoice for the year.
Global warming potential
How strongly a refrigerant warms the climate compared with carbon dioxide. New home AC systems must use refrigerants below 700.
A2L refrigerant
The class of mildly flammable refrigerants, such as R-32 and R-454B, that new systems use in place of R-410A.
Home warranty
A service contract that pays for covered repairs. The warranty company pays the contractor under its own agreement, and the homeowner pays a service fee.
Tip pool
A shared pot of tips divided among workers. Federal law bars employers, managers and supervisors from keeping any of it.

Questions

How can a plumber take a card payment without a card reader?

Send the customer an invoice from the job and show its QR code. They pay by card on their own phone through a licensed card provider, and the payment settles as USDC to your wallet, usually minutes later. Railbed is online checkout, so there’s no reader to buy or charge.

How fast do I get paid?

Each payment settles to your wallet, usually minutes after the customer pays. There’s no payout schedule and nothing is held back. Moving the USDC to your bank is a step you take through an exchange or off-ramp.

Can my technicians send invoices from their phones?

Yes. Give each technician the Sales role. They can make, send and change their own invoices from the dashboard on their phone, and they see only their own. Owners and managers see everyone’s under By owner.

Can customers tip the technician?

Yes, if you turn tips on for the invoice. The customer is offered 10, 15 or 20 percent, or their own amount, and the tip is shown apart everywhere. Federal law says the tip is the technician’s and is due by the regular payday.

Can I add a card fee to the invoice?

That is a surcharge, and state law decides it. Visa’s 2024 list shows surcharges prohibited in Connecticut, Maine, Massachusetts, Oklahoma and Puerto Rico, with rules in Colorado, Minnesota, New Jersey and New York, and Visa caps surcharges at 3%. Railbed adds nothing to your price, and fees come out of what arrives.

Why did my processor hold my payouts after a busy week?

Processors publish their reasons. Stripe’s reserves FAQ lists an unexplainable sharp increase in processing volume, and Square’s names home contracting and repair services among trades where disputes are more common. Railbed holds nothing back from your sales, and there’s no cap on monthly sales.

Can I take a deposit on a system replacement?

Yes. Send a deposit invoice when the customer agrees and the balance when the system runs, or allow part payments with a smallest first payment. If your state’s home improvement law caps deposits, the cap applies to a card deposit too.

Do you offer financing for big jobs?

No. Railbed takes card payments for the amount on the invoice. A customer who needs to spread a replacement over years needs a lender; you can still take their deposit, or any part they choose to put on a card, through Railbed.

Can I sell maintenance plans?

Yes, as a yearly plan on one invoice, with the visits it covers in the terms. Railbed has no recurring billing, so it can’t charge a card every month; send the next year’s invoice when the plan comes up for renewal.

What about home warranty jobs?

What the warranty company pays you stays under your agreement with it and outside Railbed. The homeowner’s service fee, uncovered parts or upgrades they choose can go on their own invoice and be paid by card.

Does the customer need to show ID?

The card provider decides. Smart Routing sends customers to the providers most likely to approve them and least likely to ask, but some ask for light details such as a name, date of birth and address, and large payments are more likely to need a check.

What if a customer disputes the charge?

Their bank raises it with the card provider that charged the card, under that provider’s terms. Settled sales can’t be pulled back from your wallet, and there’s no chargeback fee or ratio counted against you. Go back and fix the job first; a quick callback settles most complaints.

Is there a minimum charge?

Card providers have minimums, the smallest about $2, and $10 or more gives customers the widest choice of providers. Any real service call is well above that.

Can I keep my current field service app?

Yes. Nothing about Railbed is exclusive. Many companies keep their app for scheduling and small payments and send installs and big repairs through Railbed, using the work order number as the invoice reference.

Sources

  1. U.S. Bureau of Labor Statistics: Plumbers, pipefitters, and steamfitters, Occupational Outlook Handbook, projections 2025 to 2035, checked 20 November 2026
  2. Jobber Help Center: Jobber Payments basics, updated 6 November 2026, checked 20 November 2026
  3. Jobber Help Center: How Jobber Payments fees and payouts sync to QuickBooks Online, checked 20 November 2026
  4. Visa: U.S. merchant surcharge Q&A, states as of 15 February 2024, checked 20 November 2026
  5. Connecticut Department of Consumer Protection: Credit card surcharge, checked 20 November 2026
  6. Square: Reserves FAQ, checked 20 November 2026
  7. Stripe: Reserves, frequently asked questions, modified 2 November 2026, checked 20 November 2026
  8. Merchant Risk Council: Stricter VAMP ratio thresholds are now in effect, 1 April 2026, checked 20 November 2026
  9. Visa: Dispute Management Guide for Merchants, October 2026, checked 20 November 2026
  10. U.S. Department of Labor: Fact Sheet #15, Tipped employees under the FLSA, checked 20 November 2026
  11. Federal Trade Commission: Buyer’s remorse, the FTC’s Cooling-Off Rule may help, September 2025, checked 20 November 2026
  12. eCFR: 16 CFR Part 429, Rule concerning cooling-off period for sales made at homes or certain other locations, up to date as of 17 November 2026, checked 20 November 2026
  13. Federal Register: Phasedown of hydrofluorocarbons, reconsideration of certain Technology Transitions requirements, final rule, 26 May 2026, effective 27 July 2026, checked 20 November 2026
  14. Regulations.gov: EPA-HQ-OAR-2025-0005-0517, checked 20 November 2026
  15. IRS: Energy efficient home improvement credit, checked 20 November 2026
  16. IRS: FAQs for modification of sections 25C, 25D, 25E, 30C, 30D, 45L, 45W and 179D under Public Law 119-21, checked 20 November 2026
  17. Reuters: US judge OKs Visa, Mastercard $38 billion swipe fee settlement, 9 June 2026, checked 20 November 2026
  18. PYMNTS: Visa, Mastercard seek approval for $38 billion swipe fee settlement, 16 November 2026, checked 20 November 2026

Last updated .

PaidA water heater, installed, settled to your wallet$1,850.00

Water heater in, invoice paid.
Settled before the van leaves.

Set up in under a minute. Your first payment can settle today.

  • Paid on site
  • No setup fee
  • No cap on monthly sales

Moving a lot of volume? Talk to our team