Take solar deposits by card, months before the panels go up.

Rooftop solar averaged four and a half to six months from contract to switch-on in 2023, and longer with a battery. To a card processor that is a deposit for work months away, in a trade where installers have been going under. Railbed bills the deposit and each stage on invoices, charges the homeowner’s card through a licensed provider and settles every payment to a wallet you control.

  • Deposits and stage payments
  • Usually settled in minutes
  • No chargeback fee

Press the card to run an example sale.

Settles to
Your own wallet, as USDC on Polygon
Chargebacks
Settled sales can’t be pulled back. Card disputes go to the provider
To start
An email, your website and a payout wallet. No setup fee, no monthly fee
Buyer ID checks
Providers decide. Smart Routing picks the one least likely to ask

How can a solar installer take a deposit by credit card?

A solar installer can send the deposit as an invoice through Railbed, then bill the install and the final payment on invoices too. The homeowner pays by card through a licensed card provider, and each payment settles to the installer’s own wallet, usually within minutes, with nothing held back. State law still sets the deposit: California and Nevada cap it at $1,000 or 10 percent of the contract price, whichever is less. Loans, leases and power purchase agreements stay with the lender.

Why a solar deposit worries a card processor

A solar install is sold in an afternoon and finished months later. The homeowner signs at the kitchen table, pays a deposit, and then waits while the installer designs the system, files for a permit, books a crew, passes inspection and waits again for the utility to say the system may switch on. The National Renewable Energy Laboratory’s timeline study, published in November 2025 from installers’ own project data, found that rooftop solar “averaged 4.5–6 months from contract signing to PTO in 2023”, where PTO is the utility’s permission to operate. Adding a battery stretched that to 8 to 9 months.

not to exceed 540 calendar days from the transaction processing date

Visa
Updates and Clarifications to Dispute Rule Language

Card processors are built to dislike that shape. Stripe’s reserves FAQ lists the reasons it may hold back part of a business’s money, and the first fits solar exactly: a business that “belongs to an industry with longer-than-average delivery windows”. The same page names an account that “shows an unexplainable sharp increase in processing volume”, which is what a solar company’s card volume looks like in the spring, or in the last weeks before a tax credit runs out.

The second worry is the one the trade has earned lately. Residential solar companies have been failing. SunPower collapsed in August 2024, and in June 2025 the lender Mosaic and the installer and lease provider Sunnova filed for bankruptcy within days of each other, as Canary Media reported. When a merchant goes under owing work, the card rules let the homeowner’s bank take the money back. Visa’s own dispute rule notice says an issuer can dispute a transaction where services “were not rendered due to merchant insolvency or bankruptcy no later than 120 calendar days from the last date the cardholder expected to receive the merchandise or services, not to exceed 540 calendar days from the transaction processing date”. A processor that takes a solar deposit is underwriting that risk for a year and a half, and it prices the account that way.

The third is the market itself. The federal 30% credit for homeowners who buy solar ended with 2025, and the residential segment has been shrinking since. SEIA and Wood Mackenzie’s Q3 2026 report counted 995 megawatts installed in the second quarter of 2026, down 12% from a year earlier, and now expects “a 23% contraction in 2026”. It says installers “report longer sales cycles and falling close rates”. Falling volume, longer waits and a few large payments a month are the inputs a processor’s risk model reads worst.

Then there are the state rules on the deposit, which apply however the money is taken, and the sales rules that come with selling at the door.

Put together, these are the published rules a solar company’s card payments run into

  • Long delivery windows. Months between the deposit and a working system is a stated reason for a reserve.
  • Uneven volume. A spring rush or a deadline rush reads as a sharp increase, another stated reason.
  • Insolvency disputes. Card rules let a bank dispute an undelivered install for up to 540 days when the seller fails, whoever the seller is.
  • Deposit caps. California and Nevada allow $1,000 or 10% at signing, several other states allow a third, and Nevada allows nothing more until the utility lets the system switch on.
  • Cancellation rights. Homeowners can cancel a sale made at their home within three business days, and older Californians within five.
  • Financing in the middle. Most installs are paid by a lender or a lease company on milestones, and the homeowner’s card is only part of the money.

How Railbed works for a solar installer

Railbed is checkout and invoicing, not a merchant account. The homeowner opens your invoice, pays by card through an independent, licensed card provider, and the payment settles as USDC to a wallet your company controls, usually within minutes. Signing up takes an email, your website and a payout wallet: no underwriting and no application to pass, and no cap on monthly sales. Railbed never holds your money, and it stops new payments only when the law requires it.

At a card processorWith Railbed
A deposit for an install months away can bring a reserveNothing is held back from your sales
Payouts arrive in batches, days after the homeowner paysEach payment settles to your wallet as it’s made, usually within minutes
A dispute pulls the money back from your account and adds a feeSettled sales can’t be pulled back from your wallet; card disputes go to the provider that charged the card
A spring rush can look like a spike in volumeNo cap on monthly sales
Stage payments are a separate tool or a manual jobInvoices with lines, terms, a due date and part payments are built in
Chasing the final payment after switch-on is the office’s jobEmail reminders go out before and after the due date on a schedule you choose

What Railbed doesn’t do matters as much. It doesn’t lend, lease, or sign power purchase agreements, and it doesn’t pay you a lender’s milestones. It doesn’t check your deposit against your state’s cap, file your permits or hold money in escrow. It has no recurring billing, so it won’t charge a monitoring plan every month. It isn’t a card terminal for a showroom. It replaces only the part where a homeowner pays you directly, by card.

The deposit, and the laws that cap it

The deposit is where solar meets state law first. Most states with a home improvement law treat a solar install on a house as home improvement, and several cap what you may take before work starts. These are the caps as a contractor-software firm compiled them in October 2026, strictest first:

$1,000 or 10%, whichever is less2
California, Nevada. Staxen
One third of the price, with exceptions4
Maine, Maryland, Massachusetts, Pennsylvania. Staxen
No cap, but deposits kept apart2
New York, Texas. Staxen
Everywhere else43
None of the rules above.

California. Section 7159.5 of the Business and Professions Code says that if a down payment is charged, it “shall not exceed one thousand dollars ($1,000) or 10 percent of the contract amount, whichever amount is less”. It goes further for the payments that follow: “Except for a downpayment, the contractor shall neither request nor accept payment that exceeds the value of the work performed or material delivered.” A contractor with an approved performance and payment bond or joint control is exempt from both. For a solar company that means the deposit invoice is small, and every later invoice has to track work already done or panels already on site.

Nevada. Nevada sets the same $1,000 or 10% limit for residential contractors, and its deceptive trade practices chapter goes further for a distributed generation system, which is Nevada’s term for rooftop solar. Section 598.982185, added in 2025, says a solar installation company “shall not accept any payment for the installation of a distributed generation system” from the buyer, a lender or anyone else before the utility gives the system permission to connect to the grid, or before an off-grid system passes its final inspection and works. The one exception is a deposit within the $1,000 or 10% cap. For other home improvement work, the Nevada Contractors Board tells homeowners a contractor may take a bigger down payment only with a $100,000 consumer protection bond on file.

Pennsylvania. The Home Improvement Consumer Protection Act names “solar energy systems” in its definition of home improvement. On a contract over $5,000 a deposit may not exceed one third of the price, plus special order materials named in the contract. The same act forbids taking “any payment for a home improvement before the home improvement contract is signed”, gives the owner three business days to rescind, and requires a refund within ten days of a written request when no substantial work has been done 45 days after the start date in the contract.

The one-third states. Maryland, Massachusetts and Maine also cap the deposit at a third, each with its own threshold and exceptions; Massachusetts allows the cost of special order materials instead when that is more. New York and Texas set no cap but control where the money sits: New York wants payments received before the work is substantially complete placed in escrow at a New York bank, and Texas treats payments on a homestead job over $5,000 as trust funds kept in a construction account. Florida sets permit and start deadlines once a contractor takes more than 10% up front.

None of this changes because the homeowner pays by card, and Railbed doesn’t check it for you. A Railbed invoice for a $1,000 deposit on a $28,000 California install is lawful because $1,000 is the cap; the same invoice for $9,000 would not be, however smoothly the card went through. Read your state’s statute with your own adviser, and set your deposit invoice to match.

Selling at the door and the paperwork that follows

Much residential solar is still sold door to door, and that brings its own federal and state rules. The FTC’s Cooling-Off Rule gives a buyer three days to cancel certain sales made at their home, for sales of $25 or more, and their right to cancel for a full refund “lasts until midnight of the third business day after the sale”. If they cancel, the FTC says, “the seller has 10 days to” refund all their money and return any check they signed. A deposit taken by card on the doorstep is still inside that window.

California adds its own layer. Under Section 7169, every residential solar contract carries the Contractors State License Board’s solar energy system disclosure document on its front page, printed in boldface 16-point type, with the total cost and payments including financing, where to complain, and the homeowner’s right to cancel. The contract and the disclosure must be “written in the same language as was principally used in the oral sales presentation”. Since 2021, after AB 2471, a buyer aged 65 or older has five business days to cancel instead of three, and the CSLB publishes a separate version of the disclosure for those contracts.

State attorneys general have spent 2026 enforcing these rules hard:

  • New York. On 17 March 2026 the Attorney General sued Attyx and its lenders, alleging the company falsely promised free home solar systems and generated an estimated $275 million from fraudulent tactics in the state.
  • Michigan. On 15 July 2026 the Attorney General sued Climax Solar and the institutions that financed its sales, over a scheme the office says affected about 1,700 homeowners and $81 million in financed transactions.
  • Connecticut. On 23 October 2026 the Attorney General announced settlements with Sunrun and a sales company, including a $300,000 payment to the state. Attorney General Tong said the defendants “locked homeowners into long-term contracts without full, informed consent, and failed to deliver what was promised”. The defendants did not admit liability.

The pattern in these cases is consistent: promises about savings and tax credits, contracts the homeowner didn’t understand or didn’t sign, and work that never arrived. A homeowner who believes any of that happened to them will dispute a card payment, and the card networks will take their side if the paperwork doesn’t. The best protection is the same as the law asks for: a signed contract before any invoice, the disclosure on top, the cancellation notice given, and nothing billed ahead of the work.

Financing stays outside Railbed

Most solar is not paid for by the homeowner’s card, and Railbed doesn’t change that. A loan, a lease, a prepaid lease or a power purchase agreement is a contract between the homeowner and a finance company, and the finance company pays you. EnergySage, describing the Mosaic bankruptcy, set out the usual milestone schedule: “M1 payments are triggered upon contract signing, M2 payments occur upon installation completion, and M3 releases the final payment (often around 10%) when utilities grant permission to operate.” Its report also showed what happens when a lender stops: Mosaic told its partners that “there will be delays in all (M1, M2, M3) milestone processing until further notice”, and installers who had already bought equipment waited.

The shift since the tax credit ended has made financing more central, not less. SEIA’s Q3 2026 report says installers “have had difficulty shifting operations from cash and loan sales to TPO”, meaning third-party ownership, where a company owns the system on the roof and the homeowner pays for its power or rents it. The investment credit those owners claim carries on for solar that began construction by 4 July 2026 or is placed in service by the end of 2027.

So keep the lines clear:

  • A financed or leased job’s money comes from the lender. Railbed has no part in M1, M2 or M3, and it can’t speed them up.
  • The homeowner’s own money can go on an invoice. A cash purchase, a deposit, an upgrade the lender won’t cover, a battery added later, service and repairs.
  • Never put a lender’s fee on a Railbed invoice. The CFPB’s issue spotlight on solar financing, published in August 2024 and since marked as archived on the bureau’s site, found that lenders’ “dealer fees” can raise the loan principal “by 30 percent or more above the cash price”. Pennsylvania’s act separately forbids taking part in financing a contract that states a greater obligation than the actual price.
  • Don’t take a homeowner’s card for their loan or lease payments. Those are owed to the finance company, under its terms, not to you.

A homeowner who pays cash for a system, or pays part of it themselves, is the one Railbed is built for. They get an invoice in your business’s name, pay it by card, and you’re paid that day.

The year the credit ended

  1. 1 Jul 2018

    California’s deadline for the solar energy system disclosure document on the front page of every residential solar contract.

  2. 1 Jan 2021

    California gives buyers aged 65 and older five business days to cancel a home improvement contract.

  3. Jun 2025

    Mosaic and Sunnova file for Chapter 11 within days of each other.

  4. 4 Jul 2025

    The One Big Beautiful Bill becomes law, ending the homeowner’s solar credit after 2025.

  5. Oct 2025

    Nevada’s limit on solar payments before permission to operate takes effect.

  6. 31 Dec 2025

    The 30% residential clean energy credit and the energy efficient home improvement credit end.

  7. 10 Sep 2026

    SEIA and Wood Mackenzie report residential solar’s lowest quarter in five years.

  8. 23 Oct 2026

    Connecticut announces settlements with Sunrun and a door-to-door sales company.

  9. 31 Dec 2027Ahead

    Last day for solar that didn’t begin construction by 4 July 2026 to be placed in service for the investment credit.

The IRS puts the end plainly in its Form 5695 instructions: “You can’t claim residential clean energy credits for expenditures made after December 31, 2025.” The energy efficient home improvement credit, which covered heat pumps, ended for property placed in service after the same date. For a cash buyer in 2026, a solar system or a heat pump costs what it costs, with no federal credit at tax time, and an installer who still quotes savings that depend on one is making the kind of claim the attorneys general above have sued over.

What you sell, and how each is paid

Some of what a home energy company sells goes through a lender and stays there. These are the sales where the homeowner pays you, and a card invoice helps.

Commercial work fits too. A shop or a farm buying a system pays the same invoices, with its PO number in the Reference field.

How a homeowner pays the deposit

  1. The homeowner signs the contract, with your state’s disclosures and cancellation notice. Only then do you build the deposit invoice in Railbed: the system as a line, the deposit amount, your terms and the contract number in the Reference field.

  2. Railbed emails it to the homeowner in your business’s name, with a PDF attached and a link to the invoice page. On a sales visit you can show its QR code instead, and they pay on their own phone.

  3. The homeowner opens the invoice, sees what’s due, and pays by card.

  4. Smart Routing sends them to the card provider most likely to approve them, ranked by the chance of approval for their country, currency and amount. The provider runs the card on its own page.

  5. The provider may ask for light checks such as name, date of birth and address. Providers decide whether to ask for ID; Smart Routing sends buyers to the providers least likely to ask, but it can happen.

  6. The payment settles as USDC to your wallet, usually within minutes. The homeowner gets a receipt in your business’s name, and an alert can go to your office in Telegram or Slack.

Each later stage is its own invoice, sent when the work it pays for is done. The invoices guide covers each setting.

Stages, part payments and the balance at switch-on

Railbed’s invoices carry the settings a staged install needs.

One invoice per stage. California’s rule that a payment may not run ahead of the work makes this the safe pattern anywhere: a deposit invoice at signing, an install invoice when the work is done, and a final invoice at permission to operate. Each one shows its own lines and terms, and each settles as it’s paid. In Nevada the plan is two invoices, the deposit and the final payment at permission to operate, because the law allows nothing between them.

Part payments. You can let a homeowner pay an invoice in parts and set the smallest first payment. That suits a homeowner who wants to split a large install payment across two cards, or across two paydays. Keep the first part within your deposit rules when the invoice is the deposit itself.

Due dates and reminders. An invoice can be due on receipt, in 7, 14 or 30 days, or on a date you pick up to two years ahead; 14 days is the default. Reminders can go out from 7 days before the due date to 30 days after it. The default sends one 3 days before, one on the due date, and one 3 and 7 days after, which is useful for the final payment, the one homeowners most often forget once the system is running.

Terms. Up to 2,000 characters of terms print on the invoice: your cancellation rights, the stage this invoice pays for, what happens if the utility delays permission to operate, and your contract number. The homeowner sees them before paying.

Size. An invoice holds up to 50 lines and can total up to 100,000.00. A cash purchase of a large system with batteries can pass that; split a larger sale across invoices, which you’d do by stage anyway.

Who sends them. Give salespeople and office staff the Sales role, so they can create invoices and follow their own without seeing every payment in the business.

Cards, crypto categories and large payments

Tell homeowners one thing before they pay a large invoice. When they pay through Railbed, the card provider charges the card and uses the payment to buy the USDC that settles to your wallet. To the card networks, that is a purchase of cryptocurrency. Visa’s merchant data standards manual, in its October 2026 edition, says “Purchases of cryptocurrency must use MCC 6012 or 6051”. Some issuers treat such a purchase as a cash advance, with its own fee and a lower limit, and some cards decline the category outright.

For a $1,000 deposit that rarely matters. For an install payment of several thousand dollars it can, so put a line in your terms or your sales script: the charge shows the card provider’s name, some cards may bill it as a cash advance, and the homeowner can pay part by card and part by bank transfer if they prefer. A homeowner who hears that before paying won’t dispute it afterwards.

When an installer goes under

Every solar homeowner has read about bankrupt installers, and some of your customers have lived it. That fear shapes how they pay. Sunnova’s filing listed $10.67 billion of debt, Reuters reported, and the residential solar and efficiency company PosiGen filed for Chapter 11 in November 2025, according to BankruptcyData, which lists the servicers that took over its systems.

For a homeowner, a card payment feels like insurance: if the installer disappears, the bank can claw it back. Visa’s insolvency rule gives them that, for up to 540 days. With Railbed, settled sales can’t be pulled back from your wallet; card disputes go to the provider that charged the card, under that provider’s terms and the card networks’ rules. That keeps your working capital where it is while you do the job.

The honest answer to the homeowner’s fear is the one the law already writes: a small deposit, payments that follow the work, and proof at every stage. In New York, the deposit sits in escrow. Elsewhere, an invoice for each stage with photos of the work and the permit number on it gives the homeowner what they’d want from a bank and gives you a record if they ever ask.

Before the first deposit

  • Your state’s deposit rule. Find your state’s cap or escrow rule, and set your deposit invoice to fit it. Railbed doesn’t check it for you.

  • Contract first. Send no invoice until the contract is signed, with the disclosures and cancellation notice your state requires.

  • Your stage plan. Decide which stages you’ll invoice and when, so no payment runs ahead of the work.

  • Your invoice terms. Write your cancellation rights, refund terms and stage description once, and use the Reference field for the contract number.

  • Lender jobs. Keep financed, leased and power purchase jobs with the finance company, and invoice only what the homeowner pays you directly.

  • A note for homeowners. Tell them the charge shows the card provider’s name and that some cards may bill it as a cash advance.

  • A test invoice. Run a deposit and a staged install through Test mode before you send a real one.

  • Your payout wallet and bank route. Set up a wallet your company controls, and decide how USDC becomes money in the bank for equipment and payroll.

Running Railbed beside your lender portal and processor

Most installers will run Railbed beside what they have. Your lender and lease partners keep paying you on their milestones through their own portals. Bank transfers and checks stay the main way cash buyers pay the large stages. A merchant account, if you have one, can stay for showroom sales or for buyers who want to pay on a terminal.

Railbed takes the card payments that fall between: deposits on cash purchases, the homeowner’s own share of a larger job, batteries and heat pumps sold to existing customers, and service on systems old and orphaned. If a processor has already put your account on reserve, or closed it, after a run of deposits, Railbed can carry the card side by itself while you sort it out.

Keep one set of books. Railbed’s payments export to CSV, with each payment’s invoice and amount, so your bookkeeper can match a homeowner’s deposit to the contract and the lender’s milestones beside it.

Refunds, cancellations and disputes

Cancellations are a normal part of solar, and the law sets the clock. A homeowner who cancels inside the three-day window (five in California for buyers 65 and older) is owed their money back, and the FTC rule gives you ten days. A homeowner whose permit is refused, whose roof won’t take panels or whose utility won’t connect the system is usually owed a refund under the contract too.

Railbed can’t reverse a settled payment, so a refund is yours to make: send USDC back or agree another arrangement with them, such as a bank transfer of the deposit. Do it inside the time the law gives you, and write your refund terms into the invoice so the homeowner sees them before paying.

A card dispute runs separately. The homeowner’s bank raises it with the card provider that charged the card. Settled sales can’t be pulled back from your wallet, and Railbed charges no chargeback fee. Disputes in solar are usually about promises: savings that didn’t arrive, a credit that no longer existed, or a system that took nine months. Keep the signed contract, the disclosure, the production estimate and its assumptions, photos of each stage and the utility’s permission to operate.

What stays your responsibility

Railbed takes a payment and settles it. Everything about the install stays yours.

Fees and getting paid

Railbed shows every fee before anyone pays, and all of them come out of the USDC that arrives. The card provider takes its own fee and exchange spread, shown to the homeowner on its page. Then come a 1% network fee and the Railbed fee, from 0.9%, shown in your dashboard and locked when the homeowner starts paying. There’s no setup fee, no monthly fee and no chargeback fee.

The homeowner pays the amount on your invoice. A $1,000.00 deposit on a solar install is a $1,000.00 payment, and what reaches your wallet is that amount less the fees above, usually minutes after the homeowner pays. Price in USD, EUR, GBP, CAD, AUD, INR or SEK, so an installer in Canada, Australia or the UK can invoice in their own currency. To pay for panels, inverters, crews or rent from a bank account, send USDC from your wallet to any exchange or off-ramp you use and withdraw it there.

Card providers have minimums, the smallest about $2, which no install invoice comes near. An invoice can total up to 100,000.00; split a larger sale across invoices. Compare the fee with what a reserve on your deposits, a delayed milestone or a lender’s dealer fee costs you before you decide which payments to take by card.

Railbed beside the other ways homeowners pay

RailbedA card processorA solar lender or lease companyBank transfer or check
Getting startedAn email, your website and a payout walletApplication and reviewDealer agreement and approvalYour bank account details
Who pays youThe homeowner, by cardThe homeowner, by cardThe finance company, on milestonesThe homeowner
When you’re paidWhen the homeowner pays, usually within minutes of itDays after the homeowner paysAt each milestone, often the last at switch-onWhen the transfer clears or the check is banked
Money held backNothingReserves at the processor’s discretionThe milestones still to comeNothing
DisputesGo to the provider that charged the card; no chargeback feePulled from your account, plus a feeUnder the loan or lease termsNone, though a check can bounce
Cost to the homeownerThe amount on the invoiceThe amount, or more where surcharging is allowedInterest, and sometimes a dealer fee in the principalNothing extra
How you receive moneyUSDC in your walletBank payoutBank deposit from the lenderBank deposit

When Railbed is not the right fit

Railbed is a good tool for the homeowner’s own payments and the wrong one for the rest. It’s not the right fit for:

  • Financed, leased or power purchase jobs. The finance company pays you; Railbed has no part in it.
  • Deposits above your state’s cap. Railbed will take the payment, but the law doesn’t let you ask for it.
  • Escrow your state requires. Railbed settles to your wallet; it isn’t an escrow account at a New York bank or a Texas construction account.
  • Monthly monitoring or maintenance charges. Railbed has no recurring billing. If customers expect a card charged every month, a processor’s billing tool does that.
  • Rebates and incentives. Utility and state incentive money comes from the programme, under its own rules.
  • Paying crews and suppliers. Railbed takes payments in; it doesn’t pay people out.
  • A showroom terminal. There’s no card reader. A QR code on the invoice or a checkout page’s Share card is as close as it gets.

Words you’ll meet

Permission to operate
The utility’s approval to switch a new system on, often the trigger for the final payment.
Interconnection
The utility’s process for connecting a home system to the grid, ending in permission to operate.
Down payment cap
A state limit on how much a contractor may take before work starts, such as $1,000 or 10% in California.
Milestone payment
A payment a lender releases at a stage of the job, often called M1, M2 and M3.
Dealer fee
A fee a solar lender charges the installer and often builds into the homeowner’s loan principal.
Third-party ownership
A lease or power purchase agreement where a company owns the system on the homeowner’s roof.
Power purchase agreement
A contract to buy the electricity a system makes, at a set rate, from the company that owns it.
Orphaned system
A system whose installer has gone out of business, leaving the homeowner to find service elsewhere.
Cooling-off period
The days a buyer has to cancel a sale made at their home: three under the FTC rule, five for older Californians.
Section 25D
The federal residential clean energy credit, 30% of a homeowner’s solar costs, which ended after 2025.

Questions

Can a solar installer take a deposit by card through Railbed?

Yes. Send the deposit as an invoice once the contract is signed. The homeowner pays by card through a licensed card provider, and the payment settles as USDC to your wallet, usually within minutes, with nothing held back.

How much deposit can a solar company take in California?

California’s Section 7159.5 caps a down payment at $1,000 or 10% of the contract amount, whichever is less, unless the contractor has an approved bond or joint control. Later payments may not exceed the work done or materials delivered. Nevada sets the same cap for solar and allows no other payment before permission to operate.

Does Railbed check my deposit against my state’s cap?

No. Railbed takes the payment you invoice. Setting the deposit within your state’s rule is your job, so check the statute with your own adviser.

Does Railbed handle solar loans, leases or power purchase agreements?

No. Financing stays between the homeowner and the finance company, which pays you on its own milestones. Railbed takes only what the homeowner pays you directly.

Can I bill an install in stages?

Yes. Send one invoice per stage: the deposit at signing, the install payment when the work is done, and the final payment at permission to operate. Each settles as it’s paid, and reminders can chase the last one. In Nevada, skip the install payment, because only the deposit may come before permission to operate.

Can a homeowner pay part by card and part another way?

Yes. Invoice the part they want to pay by card and take the rest by bank transfer or check outside Railbed. To let them spread the card part over two payments, turn on part payments and set the smallest first payment.

What if the homeowner cancels within three days?

Refund them within the time the law allows; the FTC rule gives you ten days. Railbed can’t reverse a settled payment, so send USDC back or agree another arrangement with them, such as a bank transfer.

Will a homeowner’s card work for a large payment?

Usually, but card purchases through Railbed are purchases of cryptocurrency to the card networks, and some issuers bill them as cash advances with lower limits. Tell homeowners before a large payment, and split it if needed.

Can a homeowner dispute a solar deposit with their bank?

They can raise a dispute, and it goes to the card provider that charged the card under the card networks’ rules. Settled sales can’t be pulled back from your wallet, and Railbed charges no chargeback fee.

Can I bill for service on a system another installer put in?

Yes. Repairs, inspections and removal and reinstall on orphaned systems are one-off jobs paid by the homeowner, which is exactly what an invoice is for.

Can Railbed charge a monitoring plan every month?

No. Railbed has no recurring billing. Send a yearly or one-off invoice for monitoring or maintenance instead.

Can heat pump and battery installers use Railbed?

Yes. Any home energy job a homeowner pays for directly can go on an invoice: a heat pump, a battery added to an existing system, a panel upgrade or a charger.

What does Railbed cost a solar installer?

The card provider’s fee and spread, a 1% network fee and the Railbed fee from 0.9%, all taken from what arrives. There’s no setup fee, no monthly fee and no chargeback fee.

Is the federal solar tax credit still available in 2026?

Not for homeowners who buy. The IRS says the 30% residential clean energy credit can’t be claimed for expenditures after 31 December 2025. Third-party owners can still claim an investment credit on their own schedule.

Sources

  1. National Renewable Energy Laboratory, Residential and small commercial solar photovoltaic and storage permitting, inspection, and interconnection timelines (2017 to 2023), November 2025, checked 20 November 2026.
  2. California Legislative Information, Business and Professions Code section 7159.5, checked 20 November 2026.
  3. SEIA and Wood Mackenzie, Solar Market Insight report Q3 2026, 10 September 2026, checked 20 November 2026.
  4. Visa, Updates and clarifications to dispute rule language, effective 16 October 2021, checked 20 November 2026.
  5. Stripe, Reserves: frequently asked questions, updated 2 November 2026, checked 20 November 2026.
  6. Canary Media, Sunnova and Mosaic bankruptcies highlight deepening rooftop solar woes, June 2025, checked 20 November 2026.
  7. Staxen, Contractor deposit limits by state, updated 15 October 2026, checked 20 November 2026.
  8. Nevada Legislature, NRS chapter 598, deceptive trade practices, checked 20 November 2026.
  9. Nevada State Contractors Board, Consumer checklist, checked 20 November 2026.
  10. Pennsylvania General Assembly, Home Improvement Consumer Protection Act, 2008 Act 132, checked 20 November 2026.
  11. Federal Trade Commission, Buyer’s remorse: the FTC’s Cooling-Off Rule may help, September 2025, checked 20 November 2026.
  12. Contractors State License Board, Solar energy system disclosure, checked 20 November 2026.
  13. LegiScan, California AB 2471 (2019 to 2020), chaptered text, checked 20 November 2026.
  14. New York Attorney General, Attorney General James sues home solar power company and lenders, 17 March 2026, checked 20 November 2026.
  15. Michigan Attorney General, AG Nessel files lawsuit against solar company, financial institutions, 15 July 2026, checked 20 November 2026.
  16. Connecticut Attorney General, Settlements with SunRun Solar and others, 23 October 2026, checked 20 November 2026.
  17. EnergySage, Solar lending giant Mosaic files for bankruptcy, updated 10 June 2025, checked 20 November 2026.
  18. SEIA, The clean energy provisions in the One Big Beautiful Bill, updated 21 July 2025, checked 20 November 2026.
  19. Consumer Financial Protection Bureau, Issue spotlight: solar financing, 7 August 2024, checked 20 November 2026.
  20. Internal Revenue Service, Instructions for Form 5695 (2025), checked 20 November 2026.
  21. Visa, Visa merchant data standards manual, October 2026, checked 20 November 2026.
  22. Reuters, Sunnova files for bankruptcy on residential solar woes, 9 June 2025, checked 20 November 2026.
  23. BankruptcyData, Bankrupt solar companies: full list, checked 20 November 2026.
  24. EnergySage, What do I do if my solar installer goes out of business?, checked 20 November 2026.

Last updated .

PaidDeposit on a solar install, settled to your wallet$1,000.00

Deposit paid, permit filed.
Settled the day it’s signed.

Set up in under a minute. Your first payment can settle today.

  • Deposits and stage payments
  • Usually settled in minutes
  • No chargeback fee

Moving a lot of volume? Talk to our team